COMPUTER LAPTOP COMPAQ LTE 286 DON'T HAVE F10 SETUP
I have an old compaq lte/286 I have two working and parts I replaced the cr1220 battery, the laptop has no setup f10 when you start it say has run CV f1 to Setup how I config the computer to the hard drive, the time and serial ports
Thank you
You must configure floppy
Computer configuration and Diagnostics for laptop computers - Version 1.12 B
sp2054
Creates two diskettes - Computer CONFIGURATION/P and Compaq Diagnostics personal. Computer configuration is also known as the F10 Setup.
Pekka
Tags: Notebooks
Similar Questions
-
No custemer service on my area... so I need link to download
There is no link to download. You need to contact the computer manufacturer that he provided.
-
Compaq presario notebook CQ71: mother of computer laptop compaq presario CQ71
mother of laptop Compaq presario CQ71
I have a question an abot in Selangor, this motherboard.
the graphics chip is separate or integrated.
My cq71 crashed and stopped working continuous overheating by weak graphics.
so ive decided to spend the whole motherboard.
but I need to know to or if I could spend graphics.
I have already upgraded to the ram for the future graphics card integrated.
also additional guides on how to pass map main would be apprteciated.
No RAM, but you would like to install a better processor, too. Look at the manual for CPU options. They will be pretty inexpensive at this stage. You should also another radiator/heater unit to work with the different video chip. But it adapts to your chassis. The only way to look at this case if you do your own work. Otherwise, the cost will approach the price of a new laptop computer. Even do your own work that you will probably have to spend more than $150.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Cannot install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57
Original title: I am trying to install my printer (hpdeskjetf4580) on my new computer laptop compaq presario cq57 and work willnot installation disk and I downloaded all the driver and Assistant I can find
am trying to install my printer (hpdeskjetf4580) on my new compaq presario laptop computer cq57 and installation disc don't work and I downloaded all the driver and Assistant I can find and it still does not load. It will download and then extract but then nothing and I went to the file downloads and this is, but when I try to run it it extracts and then nothing again.
Hello
- What happens when you try to install the drivers?
- You receive an error message?
- What version of the Windows operating system do you use?
You can try to check and clean the boot, if the problem persists, I suggest to install the software in the clean boot state and see if it works.To see how to perform the clean boot, click the link below.
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem followStep 7 to reset the computer to start as usual.
You also try to run the configuration file after extraction of the files is complete from the location where extracted files were kept. -
How many times can I use Acrobat Pro on my three compters - top of desktop, computer laptop, the net accountant. I have to make multiple purchases?
Hi markala,.
According to the end-user license agreement, a single purchase of retail for Acrobat license is good for 2 computers.
If you want to install it on 3 machines you need to acquire a volume license.
Kind regards
Rave
-
I have Directx 3d but whenever I try to play a game on my laptop it says I don't have it.
Original title: running game says I do not have directx 3d
DirectX 3d
I have Directx 3d, but whenever I try to play a game on my laptop it says that I don't have it so I tried to download it again, and he says he's already. help please
Hello
1. what operating system are you using on your computer?
2 does with a particular game or it occurs with all games?
3. has been the game works well before?
Method 1:
Try to update the video card drivers and check if it helps.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2: Uninstall and reinstall the game and check if it helps.
You can check the link below:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Please follow the links below:
Diagnosing basic problems with DirectX: http://windows.microsoft.com/en-US/windows7/Diagnosing-basic-problems-with-DirectX
DirectX: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/DirectX-frequently-asked-questions -
Original title: Spider Solitaire on Windows XP has been removed. How can I reinstall? and I don't have the windows Xp CD.
How can I get a spider solitaire I loved :((lealy
Hi Patrice,
1. how the Spider Solitaire game gets deleted from the computer?
2. have you done any hardware changes or software on your computer before this problem?
You can follow the steps in this link:
How do I reinstall Spider Solitaire on a Windows XP machine after the match was gone?
Hope the helps of information.
-
My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator. I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much
Hello
Perform the steps in the link and check.
Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
Hope this information helps.
-
I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8. I have the lexmark installation cd.
Hello
Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:
http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU
If so, you can download driver from here, it is a product of Lexmark.
Kind regards.
-
I have a computer laptop compaq 6820 s can I upgrade to windows 7 pro
I have a Windows 7 Pro 32-bit disk
My compaq 6820 s will accept OS of ths
Hello
It is not listed on the HP support page - see here.
You can download and run adavisor to upgrade Windows 7 from Microsoft on the link below to see if there are actually problems preventing the upgrade.
http://Windows.Microsoft.com/UpgradeAdvisor
Kind regards
DP - K
-
Computer laptop bluescreens with BUGCODE_USB_DRIVER after you have closed the lid
My HP with Windows 7 X 64 laptop recently started giving the bluescreens with
BUGCODE_USB_DRIVER immediately after I close the lid and open new, as well as when the computer tries to stop.
I don't know what type of newspapers I can post to display more clearly the problem or where I can find them, guidance would be appreciated on this topic.Here are the specifications of my laptop: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/321957-321957-3329744-64354-64354-5186811-5218648.html?dnr=1Hello
Thanks for posting this question in the Microsoft Community.
1. what security software is installed?
2. don't you make changes to the computer before this problem?
I suggest you to refer to this article to check if this help.
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.
Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7. However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
After I installed Windows 7, 32-bit in my computer compaq laptop nx7040, there were two messages stating I have video card and display adapter problems. The pilots could be exceeded, but I can't find an updated driver. Can anyone help? Thank you.
Hello
This is an old machine (I know because I had one). It was a very good machine, but it upgraded to Windows 7 is a bit too far I think.
Kind regards.
-
SATA drivers for computer laptop compaq CQ45-205Au
Hello
I had searched for sata drivers for my computer compaq laptop CQ45-205au but I couldn't find a definitive solution,
can someone help me pls how to solve this problem I want to install XP on my system
If you are looking for the SATA drivers for your model, I suggest that return you the document of HP ' problems with SATA drivers when downgrading from Vista to XP "accessible from the following link:
http://support.HP.com/us-en/document/c01675438
You can even try to download the SATA drivers from the following link:
http://rapidshare.de/files/39258861/Intel_8.0.0.1039.rar.html
-
Computer laptop Compaq could not start
My laptop model is Compaq Presario CQ40-502AU. I used it for over 2.5 years.
Recently, the laptop could not start from time to time. The LED flashes to keep, but the laptop does not start.
Referring to this article:
http://support.HP.com/us-en/document/c01732674
I preformed hard reset and manged to get the laptop starts. However, the problem after several days reappered and perform a hard reset is not enough to start the laptop. Sometimes, I need to do the hard reset many times to start the laptop.
I recorded a video on the State of Flash of the LED.
I don't know if it qualifies as keeps flashing indicating the problem on my adapter?
Someone please help me on this. Thank you!
Greetings,
Disconnect the power adapter and remove the battery from the laptop. Once this is done, press in and hold the power button on the PC for a minute. Only reconnect the AC adapter and try to turn the unit back on. If this problem persists, turn off the device by pressing the power button for 8 seconds. Disconnect the power adapter and the battery. Try to start the PC again.
If the PC starts, during the Compaq logo, press the ESC key to enter the boot menu. While in the boot menu press the diagnostic mode (should be F10) and run a diagnostics of complete systems. That should tell you which device is a failure. I hope it's nothing serious, maybe a defective battery.
If your system seems to be stable during the startup and shutdown not randomly on its own, I would try to update the BIOS once started in Windows by downloading on:
Don't forget to follow directions exactly as displayed on the HP site.
Good luck
Brent -
Computer laptop Compaq CQ58 - won't boot Up - black screen
Hello
My laptop does not start right once I reset the CMOS battery. Since then he has become black, power is ON & shift caps lock on the keyboard flashes but no sign of a video signal.
Any suggestions to what is happening & what are the steps I must take to restore visual. All returns are much appreciated!
Thanks in advance.
SR
Thanks for the information,
Here is a link that explains the sequence as the caps lock light gives you. It seems to be a problem with the memory of the computer.
The link explains what should be your next step. If you have any questions about the steps, let me know.
Maybe you are looking for
-
How get the FaceTime icon back on I phone 4?
How can I get the lost FaceTime icon on my I phone 4 homescreen?
-
Three days ago, that I've upgraded to Firefox 4.01. I downloaded several files that were ok. Yesterday and today I downloaded a powerpoint file and a file *.dmg to apple. On the download window these two files, I can see with the total mb in size. Ho
-
error while sending IM Mitsuku bot
error: {}"status": "error", he said."message": "the request is incorrect.} I get this error when I send an instant message to bot mitsuku any idead on how to solve this problem? Thank you very much!
-
Three beeps, then a regular boot
Hello Apple community As recently I know since my MacBook Pro 2012, 13 "has started to behave a bit strange. Under regular use, it froze suddenly and go beep-beeps three times in a row, the after 5 minutes or so I could start regularly again. After t
-
How can I change the background color of the indicator
Hello I want to change the background color of an indicator. (Yellow in the image as an attachment). I would like to know, what property node manages this value so that I can wire a box of color to it. Thank you Jason