Computer laptop HP G6 does not illuminate. Have removed the battery and the power cable - nothing happens

Tried removing battery and turn on with power cable - no luck.  The ONLY light anywhere, that's where the cable plugs.  The unit is only 3 weeks old.  Bought at OfficeMax.

Advertisement

Hello

If you are still in the period of time where you can return the machine and get it replaced, it's definitely what I would suggest - you shouldn't be troubleshooting a whole new machine and it sounds like a hardware problem.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Computer laptop Qosmio F15 does not illuminate when the power switch / stop is pressed

    My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
    Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here.

    Help will be less appreciated.

    Thank you

    I agree with kody. Of course, it is not easy to say with certainty why this happens. Who tore your laptop? Service or only you?

    To be honest, I think you did it alone. Have you used maintenance manuals?

  • HP EliteBook 8540p: computer laptop HP EliteBook does not illuminate

    I forgot to take my power adapter as well as my laptop yesterday so I tried a Dell AC which does not seem to do anything. Then I found another AC meant only not for laptops, plugged in and of course my phone is off. I've had about 10% battery left and now my laptop will not turn on or charge up, even when you connect the right HP adapter that comes with it

    I hope I didn't FRY anything. Need help please, what can I do?

    Hi, my warranty is over.

    I ordered a new motherboard and hope I can replace myself without breaking anything or lose any screws

  • I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

    I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

    Please see: error of incorrect serial number

    I hope this helps.

    Concerning

    Megha Rawat

  • Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

    Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

    I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

    I have xp of the process and have nothing wrong.

    Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

    Any suggestions would be greatly appreciated.

    Thank you! :>)

    The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

    To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

    That's what * I * would call cleaning and optimization of a Windows XP machine:

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

    My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

    You can try another charger?

    Also-

     - Press the Option button and click it - system info - Power - post what is shown on the battery please

  • I can't connect you on some client computers on a domain environment unless I have remove the network cable.

    I have almost five machines on my LAN that cannot log on to the domain, unless I have remove the network cable and then it connects.
    Please advise?

    On the domain controller or problems by communicating with the domain controller, when you remove the network cable, you connect with that caching of credentials.  Also look at the DNS settings on the RODC, the RODC DNS should point to itself, make sure that the machines are all on the same subnet.

    John

  • my computer hp laptop Pavilion dv6800 does not illuminate

    My hp Pavilion dv6800 does not illuminate

    Try a hard reset, works sometimes. Disconnect all external devices first.

    battery and power cord 1 / removal

    2 - Press the power button for 30 seconds

    3 reinstall only the power cord for the first start.

    4. turn on

  • my laptop Windows 8 does not illuminate

    Hi, I have problems turning on my PC Toshiba laptop wibdows 8. I loaded for about an hour and tried to turn it on, but that has not worked. The battery does indeed pay when I plug in the adapter, but the laptop itself still does not even turn on when I press the power button. Can someone help me with this you problem?

    Hello Valelow,

    Thank you for visiting Microsoft Community.

    As described in the question, I understand you have a problem with turn your PC laptop Toshiba in Windows 8.

    I understand that it must be very frustrating when all of a sudden your computer power not on. However, we will work to get this problem solved with our combined efforts. If there is something related to Windows, we will certainly address this problem.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. You see any signal or any beep code when you press the power button?
    2. Have you checked out the battery and start the computer while the computer connected directly to the power?
    3. Off the computer is correctly the last time?

    Especially this kind of problems appears due to the failure of the part, but sometimes it can also be caused due to static electric lock. We can try to change the time to flee or be able to release the static power and check if that helps.

    It's actually a very simple step that usually solves problems such as issues of power no. and blank screens.

    1. Remove the battery and then disconnect the connected AC adapter.
    2. Press and hold the power button for 15 seconds, then release.
    3. Reinsert the battery and then reconnect the AC adapter.
    4. Turn on the computer.

    If the problem persists, I suggest you obtain a diagnosis of material performed on the computer from the computer manufacturer or store local tech.

    Hope this information is useful. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  • Computer laptop Wifi Hostspot does not not to other devices

    Laptop MODEL: HP Pavilion DV6

    OS: Windows 8 (even if default OS is Windows 7)

    WiFi adapt: adapter WiFi b/g/n Ralink RT5390

    Hello

    I use software such as Connectify and MyPublicWifi for some time now in the hotspots, but all of a sudden since yesterday I am not able to connect to the hotspot of my Windows Phone 8.1 device. I tried to connect an Android phone that does not work either. I kept receiving a notification saying "network Wifi did not. Try again later. It seems that its a few problems of the laptop and not devices trying to connect to it.

    I tried to restart the laptop several times to uninstall and reinstall software hotspot and even created a gateway using CMD. Even after all this, I get the same message network does not. I checked the network for any material change cards, drivers revealed that they were working properly.

    Kindly help me out here.  I'm trying to share the internet of Realtek PCIe GBE Family Controller.

    Kind regards

    Serge pacome

    Check if there's recent updates to windows that has happened since the last time you were able to use the hotspot software.

    You can consider using Windows to choose System Restore and restore the operating system of your laptop to a date before the problem started. It is a reversible process, so you will not lose data.

    You should also take a look at your firewall settings to make sure that the firewall is to allow incoming and outgoing connections occur.

    Guide to restoring the system Windows 8

  • Computer laptop Windows XP does not start.

    My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

    Hi robestes3,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    Method 1:

    First of all, you can tryLast good known Configuration and check if helps solve the problem.

    Check out the link:

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 2:

    Step 1:

    If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/310353

    If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

    In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Computer laptop HP G62 does not load

    I have a hp G62 154-canotebook. About 6 months ago, there was a problem with the cooling system (nothing to do with the fan a kind of plate), but fortunately it has been supported by my warranty with hp.  Three months after my battery problem has started; He emptied so quickly that I had to keep my computer plugged in all the time. I decided to buy a battery but rather than having a 6-cell with battery life ridiculously down, I decided to replace it with a 12 cell. A new set of problems started, my computer began to load intermitenty, until it collapsed alltogether charge and basically could not start. A few weeks back, I tried my old battery on the computer and it started, but I couldn't always reboot my computer. I don't think that the charger is at fault. I think the problem is internal. Using a battery 12 cells, which was not compatible with my computer was not a good idea. A clue to understand my problem is the fan of my computer become more noisy and turned more quickly for a minute before returning to normal. I want to fix mine and I'm looking for clues on how to solve this problem. If you can help my giving the easy solution will be appreciated and I. If you can not I would like to know how to go about learning how to repair a laptop, hp can provide me with a model of my model? etc.

    Thank you.

    Best thing to do is to try a good knowm adapter, yours may be at fault.

    HP does not provide much information other than the maintenance manual.

    Here are all the manuals HP provides for this model

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=4142862&query=G62%20154&tool=&

  • Re: Computer laptop Satellite U does not work after BIOS update

    I was updating my BIOS.

    My computer restarted abruptly, saying: there was a problem and that a check should be performed.
    After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

    When I rebooted, it stopped working correctly.
    The screen, keyboard and USB ports do not work.

    Can anyone help with this?

    Hello

    Looks like something was wrong during the update of the BIOS.
    In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

    I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

    Good luck

  • Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

    My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
    Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

    Help will be less appreciated.
    Thank you

    The same question again?

    Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

  • computer laptop Pavilion dv6 does not open files from a power source external hd

    computer pavilion dv6 laptop don't/can't open a source of powered 2 TB external hard drive after I finished mailed hd via the Task Manager? When I change the post that HD on the laptop recognizes it but the pop-up window does not display the files?

    You tired hang the external hard drive to other computers or devices to see if the files are available?

Maybe you are looking for

  • Impossible to turn off

    Hey guys I got this problem with two of my apple devices, iphone 4S and an ipad 3. Whenever I have would be to turn the unit off it would automatically go back. The switch is not sticky or perform any type of false contact. I did a restore on the ipa

  • Quickly see that only photos not albums?

    I noticed that as soon as I put a picture in an album, looking at all the photos he doesn't let me move them to other albums.  However, I don't see, to show only the photos that are not yet in the albums in order to select them and move them into alb

  • Windows 7 Ult running VMWare Fusion on an iMac - will not open the Medal of Honor-Allied Assault

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! In order to be able to run PC games on my iMac using Fusion-VM, I was obliged to purchase Windows 7 like Windows 7 on my PC was an upgrade. Desp

  • My computer is slow and a pop-up Microsoft says that my color palette is perhaps not where it should be for optimal performance

    Original title: my color sceme. My computer is slow and a pop-up Microsoft says my sceme color may not be where it should be for optimal performance, before I could click it properly, he disappeared. How can I change my sceme of color for optimal per

  • Programs Office does not!

    Office of 1.5, 2.1 GHz 3.0 GB Ram, 300 GB HDWindows 7 Ultimate, both office 2003 and office 2007 is installed. Computer work - when I send emails Outlook (2003), it integrates and sends the word.  Worked perfectly until there is approximately 2 hours


HashFlare