Computer laptop Lenovo does not connect to my personal hotspot with iPhone 6

Similar Questions

• Computer laptop XP does not connect to the broadband network.

  I'm trying to connect a laptop Medion XP to our fiber BB home connection using a Wi - Fi connection. However, our network (which uses the WSP) is not yet displayed in the list of available wireless networks. WSP n/w of that another neighbor (no fiber) is displayed (while I should be able to see several other networks). So I tried to connect the laptop to the router with an ethernet cable, but it still does not see the network. I checked this automatic dynamic DNS and IP addressisng is activated, and I installed the SP3 download first on my PC. However, this made no difference. Any suggestions please?

  Hi, thanks for your response.

  1. I talked to the ISP and excluded all router problem.
  2. There is only one other pc connected to the network. We connected the other phones before and never had a problem.

  According to me, it's that the laptop is old and may be damaged. A grumpy at work looked for me and we can't even get a wired connection works.

  Time it's bin and get a new one, I think!

  Thanks again.

• I am using windows 7 and my computer laptop wifi does not connect to the modem. It worked correctly with the other modems. I had the prob with the new modem provided by optus. can someone help me please?

  my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.

  I don't know why, please help me...

  Hello Omar.

  Thank you for keeping us posted.

  It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.

  Reply with the results. We will be happy to help you.

• Computer laptop Chromebook does not connect to the printer HP Officejet Pro 8610 range

  Hello! I have a few problems with the connection from my laptop to my printer to print documents!

  I have connected my printer to my wireless network, but do not understand how to connect my laptop to the printer!

  I don't have a disk drive with which use the installation disc in and the site that gave me to visit "hp.com/eprint/OJPro8610" shows me a 403 forbidden error message to ask. Can someone help me please? It is worth mentioning that I am not too good with computers, you may need to treat me like a little baby to make sure I know what you're talking about.

  My laptop is an Acer C720 Chromebook

  My printer is a HP Officejet Pro 8610

  Please hep me. Please, I beg you.

  Hello

  You need the following application:

  https://support.Google.com/chrome/answer/1069693?hl=en

  Please select the option #1

  Kind regards.

• Computer laptop WIFI does not connect with wifi printer.

  How do I reconnect my laptop windows 7 for my Kodak ESP 5250 without an installation disc, has had a problem with the laptop don't talk to my printer after a few years of no problems, he was advised to uninstall the printer, which I did not realize that I had lost my installation disc. Can someone help me please. ? (kath)

  You can try here...

  http://www.kodak.com/global/mul/service/index.html?reqURL=http://support.en.kodak.com/app/answers/list/kW/Kodak%20ESP%205250,%20Driver/selected/true

  It's a small file, and honestly, I don't know what function you will get...

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• laptop older does not connect to new router

  Hello

  I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

  Help! and thank you,

  Hi, Darlene:

  Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• Need to Smartphones blackBerry help-apps does not connect to the internet, even with UMA

  Yesterday for a strange reason my app fmylife, even my aim and msn messenger does not connect to the internet. The blackberry browser connects either, only opera mini-tout this time I am connected to my wifi at home and I UMA. Calls and texting works fine. I tried several times to switch off the connection and then turn it back on, I restarted the phone, I took out the battery but nada.

  Any suggestion or help is greatly appreciated!

  -Hillary

  Hello!

  Official information is available here:

  • http://blogs.BlackBerry.com/2009/12/new-version-of-BlackBerry-Messenger-available/

  See you soon!

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Laptop HP 630: computer laptop fan does not increase speed

  I had problems of heating very wrong with my pc it would tend to turn off all the tkme when it overheats, I decided to blow into the fan and dust came out. He continued to work perfectly until last night where he continued to heat up, I checked on the Internet and I found I just had to clean the fan, that's why I opened my laptop this morning and cleaned the fan. But now the fan does not accelerate if the temperature is high before her and make a horrible noise, now the fan is on, but does not change its speed when the cpu heats up! I tried a lot of freeware that increases the speed of the fan but the fan cannot be detected, but the fan is always on and idle. I opened the laptop 3 times to check if everything is connected and they are, but what could be the problem? Please help my laptop is my life right now.

  Yes I used to blow from the outside, it is very help full. I took it to get it fixed but the guy could not fix it, so he said he has tried to change the CPU and RAM, but nothing happened so I gave up. An amd box external hard drive, I bought a Hp Pavilion Dv6 of second hand, I thought my lapt lasy forever, that is that a good model does not only take care of it right. I still have faith in HP products and will soon buy a new laptop for their part again!

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• A network installed HP8600, does not connect to a new customer with OS WIN7SP1, WSD Print Driver err

  Aloha,

  My home network is composed of 3 computers with OS WIN7 SP1 and a HP8600 on a network connected to a router Linksys E3200.  2 of the 3 computers on the network with the 8600 for several months and have had continuous problems with the reception of a print command.  I tried to load the software for the printer on the computer of 3rd for the last 2 days without success.  The software is unable to complete the installation and hang up trying to ID the 8600 networked.  I felt HP and Dr. Scan running in the background and he finds the printer and gives the message "Installation failed", "Windows is unable to find a suitable printer driver.  Is there a fix that my research does not find?

  Mahalo-n-aloha... konadon

  Aloha Dandla!

  What version of the 8600 do you work with (N911a, g, or n)? Once I know that I'll connect with long drivers HP makes available or you can search for them by going on www.hp.com/support.

  Before installing these drivers, I would recommend that you uninstall the software and copies of the printer from the Manager devices, programs and features, as well as devices and printers. Be sure to leave the USB cable disconnected thoughout the process and restart your computer later.

  Also, where is the printer regarding computers and the router? Are there rooms/walls, mirrors, heavy furniature, etc... that separate them?

  Let me know and happy holidays!

• I can't connect to internet unless I'm using an ethernet cable. I am on a computer laptop lenovo and cannot connect to my home internet group. When I troubleshoot, my device is not found. What should I do?

  My computer now has internet but my laptop cannot get any internet without ethernet cable. When I troubleshoot, my device is also unrecognisable.

  Hello

  1. who troubleshoot steps did you try?

  2 did you change on your computer?

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I also suggest you to see link and check.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Troubleshoot low wireless signal quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems