Computer laptop need to change the HDD in the SDS?

Similar Questions

• I need to change the motherboard in my laptop. How to reactivate XP and Office?

  I need to change the motherboard on a Dell laptop because of the infamous video problem Nvidia. The laptop has XP Professional, Office 2003, and all my other programs on it. After I have change the motherboard, I guess I'll have to reactivate XP and Office. How do I do that? Thank you.

  Hi J_C_H,

  
   

  Method 1: follow the steps described in the article below to activate Windows XP

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

  
   

  Method 2: Follow the steps described in the article below to activate Office

  Activate Office
  http://Office.Microsoft.com/en-us/Visio-Help/activate-or-register-programs-in-the-Microsoft-Office-system-HA001118776.aspx

  Method 3: You can contact a Microsoft Product Activation Center

  How to find a phone number for a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929/en-us

• PowerCLI script needed to change the 9 network adapters to a virtual computer in a single operation

  I got about 30 mV, and I need to change the 9 cards each virtual computer network. The script below takes a while to run, is there a way to speed it up, by changing all the interfaces of a VM in a single operation?

  $VM = "MY_VM_".

  1... 30 | % {

  $VMS = $VM + $_

  Get-vm-name $VMS | Get-NetworkAdapter-name '2 network adapter | Together-NetworkAdapter - NetworkName "blah1" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "Network adapter 3 | Together-NetworkAdapter - NetworkName "blah2" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "NIC 4 | Together-NetworkAdapter - NetworkName "blah3" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "adapter 5 network | Together-NetworkAdapter - NetworkName "blah4" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name "NIC 6. Together-NetworkAdapter - NetworkName "blah" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name 'network 7 adapter | Together-NetworkAdapter - NetworkName "blah" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name '8 network adapter | Together-NetworkAdapter - NetworkName "blah7" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name 'network 9 adapter | Together-NetworkAdapter - NetworkName "blah8" - connected: $true - confirm: $false

  Get-vm-name $VMS | Get-NetworkAdapter-name '10 network adapter | Together-NetworkAdapter - NetworkName "blah9" - connected: $true - confirm: $false

  }

  Thank you very much!!. I was able to change the script of LucD work in DVS.

  FINAL VERSION:

  $hash = $null

  $hash = @ {}

  $dvs = get-view (get-VirtualSwitch-name "DVS5.1")

  $dvs. PortGroup | % {Get-View-Id $_} | %{

  $hash.add ($_.) Name, $_. Key)

  }

  # Loop below for all virtual machines

  1... 90 | %{

  $i = $_

  write-host 'tenant = $i'

  $convertTab = @ {}

  "Network adapter 1" = "$1te I".

  "Network adapter 2" = "$2te I".

  'Network adapter 3' = ' $3te I ".

  "Network adapter 4" = "$4te I".

  'Network adapter 5' = ' $5th I ".

  'Network adapter 6' = ' $6te I ".

  'Network adapter 7' = ' $7te I ".

  'Network adapter 8' = ' $8te I ".

  'Network adapter 9' = ' $9te I ".

  'Network adapter 10' = ' $10te I ".

  }

  Notice-EEG - ViewType VirtualMachine-property "Config.Hardware.Device" - filter @{' Name '=' VM-$i - 1 ""} | %{

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $_. Config.Hardware.Device | where {$_-is [VMware.Vim.VirtualEthernetCard]} | %{

  $dev = new-Object Vmware.Vim.VirtualDeviceConfigSpec

  $dev. Operation = "├editer."

  $dev. Device = $_

  $dev.device.Backing = new-Object VMware.Vim.VirtualEthernetCardDistributedVirtualPortBackingInfo

  $dev.device.backing.port = new-Object VMware.Vim.DistributedVirtualSwitchPortConnection

  $dev.device.backing.port.switchUuid = $dvs. UUID

  $dev.device.backing.port.portgroupKey = $hash [$convertTab [$_.]] DeviceInfo.Label]]

  $spec. DeviceChange += $dev

  }

  $_. ReconfigVM ($spec)

  }

  }

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• Computer still needs to use the Startup Repair tool

  Original title: my computer still needs to use the Startup Repair tool and I did a full scan of my computer and nothing came, so I don't know why I always have to use the Startup Repair tool

  I have windows vista

  Hello

  ·         The Startup Repair succeeded?

  ·         You receive an error message or error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: I suggest you do the startup repair using the Windows Vista disc and check if that helps. Consult the following link for the Startup Repair.

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if that helps.

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Only in a. won a Citizen receipt printer and I need to change the preference to print, I get a 'operations can not be a complete mistake.

  Only in a. won a Citizen receipt printer and I need to change the printing preferences I get a "operations may not be a complete mistake", I'm working on the administator. I am able to access printing preferences for all other printers that are on the computer.  This creates a problem that prevents the reception of a printing web-based program.

  I'm using a new hard drive with Windows 7 above.

  How do you re - define preferences depends on options software printers, and if this printer is fully supported under win7 - that is to say that the printer manufacturer provides some win7 drivers/software

• need to change the language to English - United Kingdom for English - United States

  Just upgraded to FF 7.0.1 and now change appears in the form of books. Need to change the language to English - United Kingdom for English - United States.

  Thank you

  Dennis

  You can check the order of the installed languages:

  • Tools > Options > content > languages > choose

• Re: I need to change the CD/DVD drive in my Satellite Pro P200

  Hello

  I need to change the unit of DVD - RW in my Satellite Pro P200, but I 'don't know remove the old unit.

  Someone help me?

  Thank you.

  (Sorry for my English: S).

  Hello

  I advise you to visit this side:

  http://www.irisvista.com/tech/

  Note, if you don't find your model, you can see for others, who may be similar. 1 last thing, remove the battery and use gloves for protection (due to static), be careful with the holders of hidden

  Good luck!

• Satellite Pro A60. I need to change the cd/dvd drive

  I am a complete "newbie" to this kind of help is welcome. I need to change the cd/dvd drive the current one is as good as a horse rocker with a broken leg! I also need to buy one that won't break the Bank.
  Thanks in advance.
  Countryman

  Hello

  You will need a compatible CD/DVD player.
  Not all readers are supported due to different master/slave/c-salt settings.
  ODD, that uses wrong settings will not be recognized by the BIOS.

  You can buy a compatible player to a Toshiba ASP in your country.
  You can also consult your user manual.
  In my manual, I could find some information on the compatible sides

• I need to change the note/endnote.

  I write my RESUME, and I have a large number of appendages, that I have to put in the body of the text.

  I tried to do in the pages and the best option is to use an endnote, but I need to change the Exhibitor in order to appear ' doc 1 ' ' doc 2 '' ' doc 3 "" doc 4 "instead of"1""2"'3' '4' only." ""»

  Is this possible?

  Y at - it another option in addition to the note?

  Thank you

  No one who wants to get hired puts notes/endnotes in their curriculum vitae. If you do this, you write a report, not a professional CV, which should be in a concise and standardized format (mainly for the very picky, the applicant tracking software). I suggest that you omit the end notes/notes and do research on what constitutes a professional cover letter and resume writing for your job sector target.

• Apple need to change the title of we are here in support we are here to listen to

  Apple need to change the title of we are here in support we are here to listen to

  Say to Apple.

  https://www.Apple.com/support/feedback/

• Need to change the palette display function

  Hello!

  I looked through the options, but don't not found how to do function pallet to be able open Subvi cumstom location. I have attached two photos - it displays what I and the second picture shows what I want.

  PS: I have LabView 7.1

  Oh, OK. Your photos have been somewhat misleading. I thought you wanted to just have the names of the categories. If you want to include a pallet to your own record, you need to change the palette as already mentioned. The Help of LabVIEW describes how to proceed. It is in the LabVIEW environment-> section of customizing your work environment.