Computer laptop Windows 7 does not detect my Xbox 360

Recently, I bought my used console. My laptop's overview of Windows 8 consumers. Although I didn't have the Media Center option, my Xbox could detect and stream my music, videos and photos from my PC. I've recently returned to Windows 7because the license of Windows 8 has been set to expire January 15. Now, for some reason unknown, my Xbox does not detect my PC or my PC detects my Xbox as an Extender in Media center. I tried everything I could think of and the instructions I found on the Xbox site, nothing done. Before I posted this, I also tried things left to people with similar problems in the answers in this forum. I tried manually assign the IP addresses of my two Xbox and PC, disabling my Windows and the firewall of the router, restart Windows Media Player sharing service, allowing the streaming on my Xbox which appeared in my streaming options, disconnect and reconnect my Xbox and PC on my network of countless times and shout and scream about the whole situation.

I tried not to open the ports because that I have disabled any firewall that I don't see. I have McAfee installed, but my subscription has expired so I uninstalled. I am at a loss for what to do because I tried everything I read and thought. We have 4 PC in our House and everyone but mine my console can detect and disseminate. Three of the four run Windows 7 Home Premium x 64, the 4th with Vista 32 bit. All the computers are on the same network and all. I tried ping my Xbox to my PC and it timed out every time, but my PC does not detect it in a way because it shows in my options on my PC for streaming media. There must be something with my PC and Windows 7 only because like I said before, everything has worked at the time where it ran Windows 8. Anyone can end this madness?

Never mind. I thought about it. I restarted the SSDP Discovery service that restarted the services necessary to make this work.

Tags: Windows

Similar Questions

  • Computer laptop Windows XP does not start.

    My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

    Hi robestes3,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    Method 1:

    First of all, you can tryLast good known Configuration and check if helps solve the problem.

    Check out the link:

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 2:

    Step 1:

    If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/310353

    If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

    In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Computer laptop Windows 8 does not load in front of a black screen. Any ideas?

    My Windows 8 portable (only 6 months) does not load it just starts with a black screen after it has passed windows screen load. Last thing I did on the laptop was an update of the system. Unable to get into safe mode or anything just stuck on the black screen with the mouse cursor. Can anyone help please?

    Hi Stewart,

    Did you do changes on the computer before the show?

    You can follow these methods and check if it works:

    Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

     

    Method 2: If the method above does not help, then you can follow the steps in the below mentioned Microsoft article and check.

    Windows 8 starts with a blank screen after a standard or hibernation

    http://support.Microsoft.com/kb/2756559/en-us

    Thank you. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

  • Computer laptop Windows XP does not start? Help

    Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

    It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

    When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

    If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

    If you get an error message windows system config, exactly what he says?

    No error paraphrased messages please!

    It was something like this:

    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

    If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Computer laptop Windows 8 does not properly connect to 8.1 Win mobile wifi hotspot - connection indicated as 'Limited' (no internet connection)

    Hello

    None of our laptops Win 8 appear to be able to connect to a wifi hotspot (internet sharing enabled, and apart from the wifi on the handset) provided by our Win mobile (Nokia Lumia 635) 8.1, there seems to be a connection between the phone and the laptop, but it is presented as 'Limited' (no internet connection).

    Same phones can provide the internet connection through the internet even setting for laptops Windows 7 without any problem of sharing.

    What additional settings are there to win 8 laptops that require an adjustment?

    Thank you!

    Hi Susanna,.

    Welcome to the Microsoft Community Forum.

    I understand that you are unable to connect your laptop 8 Win to Wi - Fi hotspot. I appreciate your efforts to solve this problem, I'll probably help you with that.

    Check the following Microsoft Help article and if you have activated inhalers of Internet connection on your computer, it will lead to problems of this kind.

    http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-FAQ

    If the problem persists, try the procedure described in the following Microsoft Help article and then check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See also the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

    Thank you.

  • Why Windows security does not detect my Norton 360 antivirus?

    In the Windows Security Center it says that windows cannot find my virus protection program. Why? I have Norton 360, which is compatible with Vista.  I primarily use internet explore. Although, sometimes, I use firefox, which I believe does not support norton. Can someone help me. Thank you.

    Here is an article from Microsoft that can help you to solve this problem: http://support.microsoft.com/KB/952923.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • wimdows media playr does not detect my xbox 360___

    wimdows media playr does not detect my xbox 360

    Hello

    1. what version of Media Player do you use?
    2. have you set up media sharing in Windows Media Player?
    3. the Xbox 360 is detected on the computer?

    You may need to configure some settings for this problem.

    If you use Windows Media Player 11, then check out these links for help:

    How to share videos, music and images between your computer and your Xbox 360 console
    http://support.Microsoft.com/kb/925915

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

    http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 does not detect not USB flash drive

    Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

    Assuming that you have several disks that work on other computers...

    If you have tried several USB drives on the same port

    AND

    This port does not recognize the USB device plugged in, while the port is not operational.

    IF

    All ports respond in the same way

    THEN

    You don't have either not installed the correct drivers

    OR they did not physically.

  • Windows 7 does not detect multiple external hard drives

    I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

    If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

    The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

  • My computer with Windows 7 does not display photos in folders when you open a folder where are saved in photos.

    My computer with Windows 7 does not display images in folders when you open a folder where are saved the images there, I do not see any image photo immediately. I don't see it when I click Open the pic. Then for the next photo, I have to click Open once again, one by one. So without opeing one by one, I can't have see images, it is very difficult for me to manage all the images.

    The following article might be worth a visit:

    Windows 7 - How to enable or disable
    Thumbnails in the Explorer of Windows 7
    http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html

  • Windows 7 does not detect not PnP monitor

    Windows 7 does not detect a PnP (Samsung 2220wm) monitor when the monitor is connected through a KVM switch. Therefore, I can't set the correct screen resolution. The monitor is correctly detected when connected directly to the pc.

    This just started recently. Before that the monitor has been correctly detected, even through the KVM switch.

    Nothing installed that I remember. I'll contact Samsung - there have been similar problems with their monitors.

  • I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

    I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

    Please see: error of incorrect serial number

    I hope this helps.

    Concerning

    Megha Rawat

  • Windows XP does not detect any internet at all despite the computer with the modem to work.

    I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

    I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

    Thank you

    Daniel

    Moreover, these are things I've already tried:

    I've tried to manually and automatically set up an internet connection
    I spoke with my ISP, the modem works fine
    I have re-partitioned the hard drive and reinstalled XP

    The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

    Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

  • HP Support Assistant on my laptop or desktop does not detect the other machine.

    HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

    @bmedbury

    The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Windows 7 does not detect external monitor!

    Hi I have a huge dilemma!

    My laptop does not recognize the external monitor. Earlier in the day, he detected the external monitor and perfectly well worked through to extend, in doubles, you name it. However, after restarting my computer, I was unable to get the external display to be recognized...

    I use a laptop Lenovo y470 and nvidia gt 550 m 64-bit. I've updated the grahpics card but in vain...

    The way I have it plugged into the external monitor is using a hdmi cable to connect the laptop to a monitor for a DVI-HDMI adapter. Basically, the dvi port became a port hdmi with this adapter.  its dvi - d.

    I think that restarting the computer developed a few updates and the graphics card only connects via VGA or HDMI and DVI not? I'm not sure... I'd love any idea of a solution.

    Hello

    If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

    Make sure that the monitor you want to extend your desktop is turned on and plugged the correct video port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

    Method 1:

    For more details, see the following articles:

    Work and play better with multiple monitors

    http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

    Move windows between multiple monitors

    http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

    Method 2:

    I suggest you to check the history of update for the recently installed updates.

    See the Windows updates are installed

    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    Method 3:

    I suggest to see the link and try to run the troubleshooter and check if it helps:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 4:

    I suggest that you try to do a system restore and check whether the problem is resolved.

    In Windows 7 system restore

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

Maybe you are looking for

  • Satellite C660-10F motherboard

    I have a problem with my laptop, it just would not start, lights are here. I have reason to believe that there is a problem with the motherboard. I tried to find what model is the motherboard, all compatible models and how much a new. Can anyone help

  • Envy6 1002tx: 3d drive guard

    I had upgraded a 10 disc and 3d windows Guard does not work they show me an accelerometer error what can I do? Please help me as soon as possible

  • RT warning flag target CompactRIO

    Because I'm having a problem with IMAQ Vision, as seen in this post, I decided to pop in for LabVIEW 2013 installation disk and I'm having a problem of getting up and running. http://forums.NI.com/T5/LabVIEW/IMAQ-not-compatible-with-LabVIEW-2014/TD-p

  • Properly handle output drop-down list box

    A drop-down list box will display one of the two types of data.  If it finds the value entered on the roll control on front panel in the column of the strings in the array [] strings and values, it will display the cell value.  Otherwise, it will dis

  • Cannot install Windows updates, error code is 80072EE7.

    Original title: Windows updates Windows Update stopped working on my desktop Vista Home premium on a month.  Fix - Its works just constantly - however once he gave me an error code 80072EE7.  After a fresh reboot, sometimes I'll get an icon showing 8