computer laptop Windows 7 won't configure

When I turn on my hp laptop, it try to configure windows but gets only 35% then stops. He repeats this process and the custom to my login to the home user.

Hello

A system restore mode without failure.

"In Windows 7 system restore:

http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

'Advanced options boot (including safe mode).

http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

"The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

@@@@@@@@@@@@@@@@@@@@@@

If this does not it, follow this method:

Make your own information system repair disc in this tutorial:

"How to create a Windows 7 system repair disc"

http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

"This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

A system repair disc is not able to install Windows 7.

Note

If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

_____________________________________

Then, use this disk for System Recovery Options:

"System recovery options".

http://www.SevenForums.com/tutorials/668-system-recovery-options.html

"How to run a startup repair in Windows 7"

http://www.SevenForums.com/tutorials/681-startup-repair.html

See you soon.

Tags: Windows

Similar Questions

  • Computer laptop Windows 7 won't turn off completely

    6 months ago, I bought a new laptop with windows 7 64 bit installed. has worked well until 2 weeks ago. whenever I stopped, she stays on the screen of closing until the battery is flat. When I turn the back says windows has recovered from an unexpected shutdown. any ideas coz im all that?

    Hello

    Try following the s method provided below and see if it helps:

    Method 1:

    It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135     

    Note: Once you have finished installing, follow step 7 article to start on normal startup.

    Method 2:

    You can't do a computer that runs Windows 7 stops or sleep

    http://support.Microsoft.com/kb/977307

    Also, try to run the troubleshooter of performance and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    Method 3:

    Also check the event viewer

    Event Viewer is a tool that displays detailed information about important events on your computer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    Hope this helps,

  • I can't open google on my computer laptop windows 7

    I can't open www.google.com or www.google.in on my computer laptop windows 7. I can't open it in Internet Explorer 11 and in the chrome browser too. whenever I try to open it, it always redirects me to a completely different site. and she did the same thing when I log into my gmail account. According to a few suggestions, I tried microsoft's malicious software removal tool and made a few other changes in Control Panel, internet options of Internet Explorer browser but the problem still exists in my laptop.

    How to remove any browser Redirect virus (removal Guide)
    http://malwaretips.com/blogs/remove-browser-redirect-virus/

  • Roller coaster tycoon 2 is not running on my computer laptop windows 7

    I wanted to play Roller coaster tycoon 2 on my computer laptop windows 7, but whenever I try to run the game (I bought the steam game)

    a message appears saying: failed to initialize the graphics system. Can someone tell me how can I run this game, I've tried everything I could think of, please help

    Try to uninstall and then reinstall the game in compatibility mode?

    See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

    Windows 7 Compatibility Center

    Check if your application software or hardware is on the list

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Software:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

    You can also try to run the program in compatibility mode

    You can find more information on compatibility modes in the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  • I can't find Windows Defender under my services for my computer laptop windows 7.

    * Original title: Windows Defender

    I can't find Windows Defender under my services for my computer laptop windows 7.

    (Moved to repair and recovery)

    Hello

    Windows Defender on Windows 7 is only antispyware. It has disabled (to avoid potential conflicts) during the installation of various programs of anti-malware to include (but not necessarily limited to) AVG, McAfee, MSE and Norton.

    So, probably your antivirus product has disabled Windows Defender. If so, you should not try to turn on WD.

    See you soon,.

    J

  • How to connect my LG HBS700 Bluetooth headset for computer laptop windows 7

    Hi, I have a LG bluetooth headset

    With this bluetooth headset, I wanted to connect my computer laptop windows 7.
    I am able to pair this head game, but it still doesn't show any list of sound settings where I can choose bluetooth together as my default helmet.
    Please help me to play music from my laptop via this Bluetooth LG headset. HBS700

    PROBLEM SOLVED:

    In fact my Windows 7 used OLD Bluetooth drivers for the device HP laptop.

    So what I did is, 1) is went to the HP site 2) found support my model 3) selected drivers drivers 4) installed Bluetooth drivers 5) combined the head game. (6) make a right click on the device coupled--> you will get an option called "Controls" [if not its simple - your bluetooth driver no is not updated]
    (7) then after you select "Controls" - you will get a screen to connect / disconnect option.
    (8) select the Connect button
    (9) installation it will require drivers for your device.
    (10) then you are READY to USE your Bluetooth Head set.

    I'M VERY HAPPY :) that my head set work with my laptop... :) Thanks to my friends :)

    -Anya Prasanna @ Banagalore, India
  • the sims 3 can be played on a computer laptop windows 7?

    I really want to get the sims 3, but I don't know if my laptop it works because it's a computer laptop windows 7 which is suppose to not be abe to run the sims 3 I think it's unfair to the people who have it and r real big fans of the sims and can't get the new version! If EA, I think you are mistaken if you didn't not put game 4 da windows 7!

    According to MS, Windows 7 supports the Sims 3: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Sims%203&v=EA&uid=&pf=3&pi=0&s=sims%203&os=32-bit

  • computer laptop Windows 7 saves not CD / dvd

    my computer laptop windows 7 is no recorded any cd / dvd... Ive checked everything on my computer and online, but couldn't find a solution! does anyone else have this problem? If so how do solve you this problem? Help, please...

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and


    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Original title: fax and scanning

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Uncheck the fax and scan Windows

    Click OK

    Reboot if prompted

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Check fax and scan Windows

    Click OK

    Reboot if prompted

  • Age of Empires 2 Gold on computer laptop windows 7.

    Age of Empires 2 Gold used to work on my computer laptop windows 7, but no longer works. I have Home Premium 64-bit.

    Hello

    Since the issue is with Age of Empires, the right place to contact you would be taken care of Age of Empires.

    http://ageofempiresonline.com/en/support

  • How can I share network between the computer laptop windows 7 into a window of 8 tab?

    How can I share network between the computer laptop windows 7 into a window of 8 tab?

    Hi HollyMcColl,

    Thanks for posting your query in the Microsoft Community Forums.

    I understand from the description of the issue you are trying to share the computer network between Windows 7 and Windows 8. I will certainly help you in this regard.

    I appreciate if you could help me with more information.

    -Using Windows 8 Surface RT?

    Note: You can create a Windows RT PC home group, but you can join one.

    I suggest you to consult the help articles and check if it helps.

    A Wi - Fi & networking

    http://Windows.Microsoft.com/en-in/Windows-8/HomeGroup#1TC=T1

    Share files on a home network or your Surface

    http://www.Microsoft.com/surface/en-us/support/storage-files-and-folders/share-files-on-a-home-network?LC=1033

    Share files and folders on a network or shared PC

    http://Windows.Microsoft.com/en-us/Windows-8/share-files-folders

    Get back to us if you need further assistance on Windows 8. We will be happy to help you.

  • I don't remember my password for my computer laptop windows 7

    I forgot my password on my computer laptop windows 7. It is a small laptop, so there isn't a disc compartment. I can't buy a floppy disk or a usb at the moment flash drive either. I was hoping there is a way to recover or change my password?

    No, the only way to recovery will involve your booting from the Windows installation disc * [this can be done on a 4 GB USB DRIVE, but you would need access to another PC to make].  The only other way would be to restore the factory settings

    If you have an existing 4 GB USB, you can save the files to somewhere else and then perform the recovery and then reformat the USB key to put your old files on it when you are finished.

    [* If you have an optical drive, you could do a disc repair system instead.]  If you know someone who has Windows 7 (32 bit, I guess that, in your case - it must be the same as yours) so that he could do a disk system repair & transfer it on a USB key which must only be 406MB or maybe a little less.  The instructions for this are also in the link below.]

    If get you your hands on a USB and then see the instructions of the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

    Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

    You could be up & running again within an hour, probably less.

    If you have any questions, post it here; I'll keep an eye on your question.

  • Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

    Original title: computer laptop (Windows 8) starts do not

    Laptop: Sony Vaio

    Processor: core i3 with 4 GB of memory
    Operating system: Windows 8
    Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
    I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
    How to solve this problem?

    Hi Sunil,

    Thanks for the reply.

    I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

    Get help from Microsoft Windows activation

     

    https://support.Microsoft.com/kb/950929?WA=wsignin1.0

    Let us know if you need assistance.

  • Having trouble installing photoshop elements and Premier on my computer laptop windows 7?

    I can't install photoshop elememts or Prime Minister 11 on my computer laptop windows 7?

    No matter if you have the disk or downloaded.

    You have purchased a serial number and, in your case, got a disk and a box as added extras.

    You can always download the trial version on the Adobe site with any browser and which activate with your serial number.

    http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us

    See also

    http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html

  • How to static ip configuration for computer laptop windows 7 ultimate 32 bit on area (locked setting ip Tcp/Ipv4 properties)

    My English is not good. I often meet customer mobile computer'customer use window 7 ultimate up field (not the working groups). They want to connect to the internet to work. These computer' laptop computer customer being locked setting properties ip address it guy in place they work. So I can't open affecting properties connection - Local static configuration network ip for them to connect internet work. ?
    Please help me. Thanks a lot of.

    Hi Trong,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

Maybe you are looking for