Computer laptop Windows XP does not start? Help

Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

If you get an error message windows system config, exactly what he says?

No error paraphrased messages please!

It was something like this:

Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

Here's how:

If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

This is not the same as recovery disks that might have come with the acquisition of the system store.

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

http://www.mediafire.com/?ueyyzfymmig

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS.  It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

Assuming your boot drive is C, run the following command:

CHKDSK C: /r

Let chkdsk finish to correct the problems, he could find.

It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

You must run chkdsk/r again until it finds no error to correct.

Remove the CD, and then type "exit" to exit the RC and restart the computer.

You have not to set the BIOS to boot the disk HARD since the CD won't be.

Tags: Windows

Similar Questions

  • Computer laptop Windows XP does not start.

    My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

    Hi robestes3,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    Method 1:

    First of all, you can tryLast good known Configuration and check if helps solve the problem.

    Check out the link:

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 2:

    Step 1:

    If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

    Check out the link for more information on starting your computer in SafeMode below:

    http://support.Microsoft.com/kb/315222

    Step 2:

    If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/310353

    If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

    In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Interrupted for laptop - Windows 7 does not start

    M6 computer - laptop - HP pavilion

    Operating system - Windows Home Premium

    Unfortunately I dropped this computer from a height of 4 feet after closing it.

    Since their start-up is not possible.

    I started the "the option computer repair"-it seems to start but then hangs indefinitely.

    Al the other options safe mode, safe mode with networking, etc., including "start windows normally" do not start and all back to 'Repair your computer' which still once blocks indefinitely.

    I tried to get the recovery option by turning on the computer by pressing F12 repeatly before the windows logo appears.

    The system recovery words appear, but I again picked option 'Repair your computer' which once again blocks indefinitely.

    Advice please - the situation seems hopeless. ?

    Concerning

    Flynne

    ______________________________________________________________________________________________________

    Thank you for your quick response.

    I managed to get the option of recovery has begun and now my computer works well.

    I ran a disk check and all sectors appear to be intact.

    I'm very lucky to get away with this.

    I have discovered that my computer is equipped with a device that limits or prevents damage to the hard drive.

    Thank you for your interest.

    Concerning

    EFLYNN

    _______________________________________________________________________

  • Computer laptop Windows 8 does not load in front of a black screen. Any ideas?

    My Windows 8 portable (only 6 months) does not load it just starts with a black screen after it has passed windows screen load. Last thing I did on the laptop was an update of the system. Unable to get into safe mode or anything just stuck on the black screen with the mouse cursor. Can anyone help please?

    Hi Stewart,

    Did you do changes on the computer before the show?

    You can follow these methods and check if it works:

    Method 1: Unplug all external devices connected to the computer except keyboard, mouse and monitor and check if the problem persists.

     

    Method 2: If the method above does not help, then you can follow the steps in the below mentioned Microsoft article and check.

    Windows 8 starts with a blank screen after a standard or hibernation

    http://support.Microsoft.com/kb/2756559/en-us

    Thank you. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

  • computer laptop Windows vista may not start

    I have a laptop windows vista that can not boot up to windows

    1. when I on the laptop, it loads a black screen with 5 choices
    1. safe mode
    2 network in safe mode
    3
    4 last configuration:
    5 launch the window normally
    I tried to enter in all of the choices of 5... whatever choice I go, the laptop will just keep loading and loading and loading forever bar and I waited 15 minutes and finally the computer laptop 1 blue screen flash and it has restarted and it loads again to the black screen with 5 choices
    No idea what can do with him?
    Please help me.
    Thank you

    Hello

    ·         What is the full error message?

    .         Were there recent hardware or changes to the software on the computer before the show?

    I suggest you to remove the devices connected to your computer (except keyboard and mouse) external and check if you can start the computer.

    Method 1:

    You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

    To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

    Follow this link provided below to start your computer in Advanced startup options.

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Method 2:

    Follow the steps in the article, and check if that helps.

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

    Method 3:

    If you have Windows Vista DVD you can try running the Startup Repair and the Tool of diagnosis of Memory Windows to check and Windows Recovery mode if it helps.

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

    X:\>chkdsk/f

    /F Corrects errors on the disk

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  • Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

    My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
    Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

    Help will be less appreciated.
    Thank you

    The same question again?

    Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

  • Windows xp does not start Help!

    for some reason any start-up became very slow so I read on how to try & fix it.
     
    all I did was remove the programs / files (?) depending on whether I was rarely used, I also read that made every thing on the net before removing:
    JAVA (TM) UPDATE 20
    COMMS DISTANCE DRIVER
    80 RUNTIME LIBRARIES
    SEARCH GUARD MORE (MY TATTOONS)
    SEARCH GUARD PLUSINSTALL (MY TATTOONS)
    NERO 7 ESSENTIALS
    GOOGLE EARTH
     
    so now when I turn it on I get the message that windows did not open and it gives me several choices to try & start (with 30 second countdown)
    Download
    safe mode
    Normally start etc etc...
     
    I have tried the one recommended, but he returned to the same job, so I tried all that still no luck.just returns to the same page.
     
    When you try to start sometimes a blue command screen for 1 second, a load of code appears on the other tent .sys stuff & it says tryinfg to install but then after a few seconds-dos at startup screen instrucion
     
    If you can please help!
    Thank you very much

    Ok.  I couldn't decide to say "urgent" or "feverishly".

    There are still a few questions in my first reply you must answer if you can...

    So, let's start with this:

    The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

    These can cause corruption in the file system that must be fixed before you do anything else.

    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

    There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Computer laptop Windows 7 does not detect my Xbox 360

    Recently, I bought my used console. My laptop's overview of Windows 8 consumers. Although I didn't have the Media Center option, my Xbox could detect and stream my music, videos and photos from my PC. I've recently returned to Windows 7because the license of Windows 8 has been set to expire January 15. Now, for some reason unknown, my Xbox does not detect my PC or my PC detects my Xbox as an Extender in Media center. I tried everything I could think of and the instructions I found on the Xbox site, nothing done. Before I posted this, I also tried things left to people with similar problems in the answers in this forum. I tried manually assign the IP addresses of my two Xbox and PC, disabling my Windows and the firewall of the router, restart Windows Media Player sharing service, allowing the streaming on my Xbox which appeared in my streaming options, disconnect and reconnect my Xbox and PC on my network of countless times and shout and scream about the whole situation.

    I tried not to open the ports because that I have disabled any firewall that I don't see. I have McAfee installed, but my subscription has expired so I uninstalled. I am at a loss for what to do because I tried everything I read and thought. We have 4 PC in our House and everyone but mine my console can detect and disseminate. Three of the four run Windows 7 Home Premium x 64, the 4th with Vista 32 bit. All the computers are on the same network and all. I tried ping my Xbox to my PC and it timed out every time, but my PC does not detect it in a way because it shows in my options on my PC for streaming media. There must be something with my PC and Windows 7 only because like I said before, everything has worked at the time where it ran Windows 8. Anyone can end this madness?

    Never mind. I thought about it. I restarted the SSDP Discovery service that restarted the services necessary to make this work.

  • Computer laptop Windows 8 does not properly connect to 8.1 Win mobile wifi hotspot - connection indicated as 'Limited' (no internet connection)

    Hello

    None of our laptops Win 8 appear to be able to connect to a wifi hotspot (internet sharing enabled, and apart from the wifi on the handset) provided by our Win mobile (Nokia Lumia 635) 8.1, there seems to be a connection between the phone and the laptop, but it is presented as 'Limited' (no internet connection).

    Same phones can provide the internet connection through the internet even setting for laptops Windows 7 without any problem of sharing.

    What additional settings are there to win 8 laptops that require an adjustment?

    Thank you!

    Hi Susanna,.

    Welcome to the Microsoft Community Forum.

    I understand that you are unable to connect your laptop 8 Win to Wi - Fi hotspot. I appreciate your efforts to solve this problem, I'll probably help you with that.

    Check the following Microsoft Help article and if you have activated inhalers of Internet connection on your computer, it will lead to problems of this kind.

    http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-FAQ

    If the problem persists, try the procedure described in the following Microsoft Help article and then check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See also the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

    Thank you.

  • my windows firewall does not start and I get a erroe code 5, can someone help me

    my windows firewall does not start and I get a erroe code 5, can someone help me

    Hello

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    Method 1.

    To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

    Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

    Method 2.

    Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    I hope this helps.

  • Please help: Windows XP does not start error message: STOP: 0 x 00000024

    Original title: Please help: Windows XP does not start.

    Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

    If this is the message you get, then you have multiple problems...

    1, xp should be on the C: drive, not F:

    Default C: is for the OS only. With xp on drive F: and you use only a hd

    then the hd must be formatted and all partitions deletion (unless there is a relocation

    the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

    be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

    for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

    Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

    Read kb307654 or kb314058

  • Laptop with Windows 7 does not start.

    I send this message on an old laptop with Win XP.

    My new laptop HP 620 does not start and displays the error message "User profile Service" cannot be loaded."  I need to get the laptop to the top and running in order to enter the system.  What should I do?  Can anyone out there help, please?

    Jim

    The verbatim error message is probably

    The user profile service has no logon

    When you type this phrase in a Google search box, then you will get countless recipes to solve the problem.

  • Windows Vista does not start, turns to a blue screen error 2203

    original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

    Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

    So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

    "I tried to do the second option, because the first really helped."

    Something works, or it doesn't work regarding: "really helped."

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You may be interested in this:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

    Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

    Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

    Can someone give a help?

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista does not start - only Safe Mode

    Hello

    Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

    Press F8 all turn the laptop.
    Choose the first option: by computer repair and try to repair the operating system automatically.

Maybe you are looking for