Computer loses internet connection when I leave the room

Similar Questions

• Lose Internet connection when the AnyConnect

  I can connect to Anyconnect without problem, but when I try to access any website I lose connection (Internet & VPN disconnected). I want to mention that when I use the host name for a Web site on the url bar as https://www.cisco.com it is when I am offline, but if I use the IP (https://23.218.112.172) directly I disconnected.

  Hello

  You have configured by the XML profile with the DNS name? You have an installed SSL certificate using the FULL domain name?

  Thank you

  David Castro,

• HP Envy M6 loses internet intermittently when running on the battery.

  Hello

  Recently, my HP Envy M6 has been intermittently lose internet during the execution of battery - it's always nice when it's plugged in, however. I ran the diagnostics manual wifi and nothing is not detected.  Any ideas?

  I am running windows 8.1and model number model is: E0R92EA #ABU

  Thank you

  Brian

  Brian,

  This could be a setting in your profile (or power saving wireless mode) power setting?

  I had problems where an update (from HP, not Windows) changed (my) default settings for power profiles.

  Can you restore back a few days or a date prior to the problem? This would test if the a software update changed something...

  Kind regards

  Louis

• How can I remove the "crumbs" of an uninstalled spyware that brought me to lose internet connectivity?

  This problem is not specific to Vista. Last year, I bought a new laptop of Dell Studio with XP SP3 installed. Everything worked very well; but was my former spyware removal software is more of his work. I could tell my internet experience slowed but the program did not come with any spyware/malware to remove. So, I went back to a program that I used about 5 years that seems to work for us: Stopzilla. I could tell immediately something was wrong, because while the program seems to work fine while I was online, when I tried to use it to search for existing infections stagnant 1% fine and would never go any further.

  I tried an uninstall. The function of "uninstall a program" Windows would not be set up Stopzilla for uninstall. Of course, I was in trouble. Used another 3rd part of the program of cleaning of registry problems, etc., but it also uninstalled programs. Apparently, not good enough. I then did a "search" for all the files/folder (hidden or not) that had attached to it Stopzilla and remove results. Still nothing.

  As I've studied how to remedy this problem, I found many references to lose internet connectivity wireless due to the remains of these types of programs related to system functions.

  I did all the basics: checked the connection itself, checked my network settings, check the configuration of the router, ping the ip address, renew the ip address, checked the DNS server address, etc, etc.  Even gone beyond that and used the ip address 'reinstall' difficulty and even tried track things directly through the registry. Nothing. Still unable to connect to the internet using ANY browser and can only use it locally.

  I am about to take the computer to a PC clinic but really won't be without the phone for days because of a major project deadline.  Is there anything I can do to get my wireless connection working again?

  Thank you - gstrumberger

  STOPzilla says on its site that its compatible with win98 through win 7, which could lead me to suspect its validity, and since you were unable to uninstall it, well...
  I suppose you have a restore point for a period prior to installation?
  And if not how comfortable you are with the registry change?

  malawarebytes can be a useful tool
  http://www.Malwarebytes.org/

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• Abandonment of the wireless Internet connection when you use HP G62 PC with HDMI connector to a TV from Samsung LE40C580

  Although I have connected my laptop HP G62 to my Samsung LE40C580 TV via a HDMI 1 meter and everything worked OK. The wireless internet then falls after a few minutes. After removing the HDMI cable, internet reconnects. Could you please provide a solution? I have a wireless full power before and after the stall signal.

  Hello

  What version of the Windows operating system is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Internet Connection Troubleshooter and check if that helps.

  Follow the steps to run the Internet Connection Troubleshooter:

  Click the Start button, type Troubleshooting in the search box, and then click Troubleshooting. Under network and Internet, click connect to the Internet and run the troubleshooter.

  Method 2:

  Try to update the graphics driver and check if it helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Hope the information is useful.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hello

  Need help desperate please

  Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hi TomasB,

  Please reset the file browser & Internet hosts.

  Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help

  • Close all windows of Internet Explorer that are currently open.
  • Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
  • Press or click the Tools button and then tap or click on Internet options.
  • Press or click on the Advanced tab, and then tap or click Reset.
  • In the reset Internet Explorer settings dialog, tap or click Reset.
  • When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.

  Reset the hosts file

  Reference: https://support.microsoft.com/en-us/kb/972034

  Mac: How do I edit the file Hosts on Mac OS X - TekRevue

  Reference: Solutions to connection errors, activation and connection with Creative Suite and creative Cloud applications.

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Lose internet connect during sleep

  Each computer or laptop I've owned kept his internet connection when it is entered in the mode 'sleep'.  When I woke up the computers I always had the internet always there.

  When I bought my new Acer Veriton X4620G a year or two ago the first thing I noticed was that whenever I wake the computer from sleep mode after that I left it for a while, his internet connection would be gone.  This would force me to click on the internet icon in the taskbar to log in again.  This issue has continued to this day.

  Can someone tell me how I can get my Acer Veriton to keep its connection to the internet when it starts in mode 'sleep'?  It's Aussie a nuisance having to click on the network icon and wait that he reconnect every time.  No cell phones my wife or my own laptop or any othe computer I've had that.

  Why is - what happens with my Veriton?

  Thank you.

  The only thing that works for me leaving my e-mail client and my browser open.  When I wake the computer from sleep mode after an absence of the connection is still there.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Satellite L670 loses internet connection

  Hello, since a few days my laptop loses its internet connection when I move a few meters or put me behind a window. In this case, I am sitting the router to 2 meters maximum. The power of wireless transmission is very good according to the screen, but there is no access. If I go back inside and once again, I have Internet.

  Should what drivers I replace to make sure that my setup is correct? Either way, I also found that the Control Panel, the network card freezes from time to time if I try to change the configuration.

  The laptop my wife works correctly in all cases.

  Modellname Satellite L670
  TEILENUMMER PSK3EE-06L001GR
  Serial number 9A572922K
  BS-Version Microsoft Windows 7 Home Premium Service Pack 1 6.1.7601
  BIOS Version 2.30
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz
  4096MB RAM Arbeitsspeicher

  Something like that shouldn't happen.
  Do you use original pre-installed BONES you have gotten with this laptop?

  According to tender specifications that there card Broadcom BCM94313 WLAN indoors. Try to install the latest driver from http://aps2.toshiba-tro.de/wlan/

• WRT160N LOSES INTERNET CONNECTIVITY

  I have a wrt160n connected to a Motorola ATT DSL Modem.I only have intermittent internet connectivity. He worked awhile then lose internet connectivity on my XP computer plugged directly on the router, as well as on my laptop vista home wireless. I worked twice with the Linksys support and followed their suggestions of reconfiguration, but the problem persists. The modem ip address is 192.168.1.254. Linksys said to change the default address of the router to 10.10.1.1... I did, but it didn't fix it. Some of the messages on the forum said to change it to 192.168.2.1. I tried and still intermitttent only connectivity. I can bypass the router and go directly to xp destop and it runs rock solid, so the problem is somewhere in the settings of the router. I'm about to renounce it and sell it on ebay and buy an ATT modem/router combo. The Ant is my last resort. Another thing, I downloaded and installed the latest version of the firmware 2.0.02 11.

  I'm under the router with DHCP. I use my own SSID with personal WPA2, AES encryption. Linksys support had me change the standard channel to 2,452 GHZ and disable any filtering of the internet. Now, I use an IP from 192.168.2.1.

  I am courious to see if anyone has had this router to work on a DSL ATT modem. Also, anyone have any suggestions on where I go from here?

  Thank you

  If you have version V2 of this router, you can downgrade the firmware.  See here:

  http://audipages.com/router/

• error "Unable to connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  Original title:

  Multiplayer on FSX used to work, but now there is an error message that says: unable to connect to GameSpy check your internet connection. What should I do?

  I can connect to the local network, but not to the Internet (GameSpy).

  Hi Matt,

  Thanks for coming with your question in the Microsoft Community Forums.

  It is apparent from your message that you get an error "Could not connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  You can try the steps in this link and check if that helps.

  Microsoft Games: Multiplayer troubleshoot

  http://support.Microsoft.com/kb/819836

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  You can check out the following link and check:

  Support for common issues of PC games

  http://support.Microsoft.com/ph/7745

  If the steps above could not solve the problem then it will be better to communicate with spy Game.

  View the results of the proposed measures. Please let us know if you need help with Windows in the future and we will be happy to help you.