Computer N5030 laptop Windows 7 starts only mode, safe mode with networking and I have no audio and Hifi. Help!

Similar Questions

• Safe mode with network and system to restore?

  OK, so I had a virus for a couple of days.  I have contacted my provider of anti-virus ahead before he touched my computer to the point of non-use (now I can use it only in Mode safe mode with networking).  They sent instructions on how to remove it, clean up and get my system running and upward, but unfortunately I cannot do all of this if I can't turn off my system restore.  I don't think, nor do I really want to try, I can restart in normal mode.  Before that I couldn't openanything because the virus that I got (Antiviri I think) saying the file is infected bonnefin. Effing stupid virus. : ((They ruin everything.  Needless to say I'm a freakin delay and computer illiterate.  I really need help.  Obviously.  Is anyone out there can explain things to me?  I also use on series of ML of gateway for the 32 - bit Vista.  If that helps...

  http://www.bleepingcomputer.com/virus-removal/remove-AntiVir-solution-Pro

  Read the information above on how to remove it.

  Follow the EXACT steps.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 starts only in Safe Mode after serious Trojan virus. Help, please!

  Yesterday, I got a trojan, Anti-Spyware Soft virus accidentally. I'm confident enough, I removed the virus (removed from the registry, ran Malaware which found other cases of the virus attack), but now my computer will only start in safe mode.

  I made sure that the box was not clicked in the menu in msconfig. I tried pressing F8 and using the Startup Repair utility, that is no problem. I can't do a system restore, that there is no restore point. This is very frustrating and I am at my wits end, what should I do?

  In safe mode, click Start, run then type in msconfig and click OK.  On the check in tab boot to see if Safe Mode is enabled under Boot Options.  If so, uncheck it and try to restart.

• Windows loading in black and white, when running in safe mode with network it runs in color, how can I solve this?

  When I load windows it runs only in black and white, I tried to start in safe mode with network and it runs in color, can you tell me how to solve this problem?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows cannot find network mode safe mode with networking cards?

  Hello.

  When I try to access a Safe Mode with network I can not connect to the Internet, because windows can not find any network adapters. But it is perfectly fine in Normal Mode. I tried to uninstall and reinstall the NICs without success. What can I do? I need help badly.

  Or is it simply not not in safe mode with network and will rather /normal/Mode safe.

  BTW, my laptop is model Vaio series S 2011.

  Thank you very much.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet in safe mode with network. Please correct me that I misunderstood.

  Please provide us with additional information by answering a few questions below, this will help us better solutions to the problems.

  -Why are you trying to connect to Internet in safe mode with networking?

  -Do you get any error code or error message?

  I doubt that the choices you make in the options of safe mode takes you to the safe mode and the insecure with networking mode.

  Please do the following and check if you are able to boot into safe mode with network.

  a. restart the computer and press the F8 key during reboot, until you get the Advanced startup options.

  b. in the boot advanced options, use the keyboard to select safe mode with network and press ENTER.

  c. This will start the computer in safe mode with network. Once the computer has been started, check if you are able to connect to the Internet.

  For reference:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please try these steps and if the problem persists, please tell us so that we can help you.

• Internet connection only in Mode safe mode with networking

  I was using the Internet at home, when I had a pop up telling me there was an anti-virus program download. I pulled out the window pop-up, rebooted the computer and turned on safe mode with network. I thought it was just a problem of virus/malware/spyware. Since I installed several programs to prevent/remove any type of spyware (virus, etc.), I decided to run in safe mode, just in case. I ran the and after he said that my computer was clean, I restarted the computer in normal mode. The internet, however, did more work. He said that the Internet connection was closed portals HTTP, HTTPS and FTP. He also recommended that I check my firewall settings. I use the internet in safe mode with networking, and it works here though.

  I'm not really sure what the problem is with the internet settings. I could really use some help!

  Hi AngelicaR,

  OK, you should now check your firewall settings, to do so right click my network connection on your desktop-> select Properties (or click Start-> Settings Control Panel-> network connection)

  Now right click on your connection to the LAN->-> Advanced->-online advanced, settings, settings-the default settings online-> restore default settings. This will restore the default firewall on your local network connection. Click ok on the screen and restart your pc to see if its working.

  If you find the same problem again and then come to the same path: required connection to the local network-> settings-> Advanced-> settings-online Exceprions-> Tickmark the HTTP, HTTPS and FTP, also tickmark "display notification when firewall blocks a program" that will help you the notification to allow access through the firewall. Click ok on the whole screen, restart your pc.

  I hope this helps.

• Windows 7 starter, no internet access, WPA2 Enterprise Network

  I use an Asus EeePC for the first time to work.  I replace my ibook apple that I had no problem with in the past. I entered the correct name for the network.  has selected WPA2-Enterprise, AES encriptación.  Using the PEAP authentication.  After entering my user domain\username and password, I connect to the network, but when I look at the network he says no internet access.  I can see my internal network and the computers.

  Any advice would be greatly appreciated.

  Thank you

  Hi Kbpipes,

  First check the edition of Windows 7 installed on your computer, since you mentioned that you use the Windows 7 starter edition. Windows 7 starter edition will not be able to join the domain network. To join the domain network, you will need to install either Windows 7 Professional, ultimate edition.

  Access the link below to learn more about the field of Assembly.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/domain-join

  To verify which edition of Windows 7 is installed on your computer, follow the steps below.

  1. Click Start.
  2. Right-click on computer and click Properties.
  3. Check the information on your computer.

  However, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

  Access the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also try to temporarily disable the security software of the computer and try to connect to the Internet. If you are able to connect to the Internet, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Also, you can try to start the computer in safe mode with network and check if you can connect to the Internet. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  You can also contact your network administrator and check if there are settings that must be changed or configured to access the Internet.

  Post back with the above information and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connect only to the browsers of all time a site works in Mode safe mode with networking

  A few weeks ago, I was on my site that I have and all of a sudden, it does not load get time out my site http://www.undergrounddirtnap.net/ was working fine until then. I tried a bunch of stuff like compensation history of cookies and all browsers called ISP data, called server owner, router Reset also got a new router and modem today still will not work. At the laptop, what happens to a friends and it does not work there either. It works with the VPN or proxy. I left my problem on a few discussion forums and someone said try Mode safe mode with networking and I tried it worked with it. So I think it's a computer problem see all the other network devices can access. I am running windows 8 and I have never changed the settings or anything also its OK no virus or malware protection. I had to load once then nothing would charge after wass, and after a few days trying constantly any help would be appreciated if you have any questions about things just leave them here and I'll be more specific. As I don't understand everything I've done for this problem I remember not because Ive tried a ton of things. Thank you

  have you tried that?

  in a command console type:

  ipconfig/flushdns

  and press enter

  then try your site

  I tried it and it didn't work but I installed windows 8.1 a few minutes ago and it works. If this has been resolved.

• Keep safe mode, safe mode with network stops, why?

  Hello, I am running xp pro svc pk 3 and ie 8, 32 bits.

  I'm in safe mode periodically to run scans. Once completed, I support on restart, it goes to closing towards the bottom of the screen and remains there forever. (Actually more than an hour after an hour I just stopped using the power button.

  I can go to safe mode with networking, and the computer restarts correctly.

  No matter how safe mode, I'm going in?

  Thank you for any assistance.

  Sorry Elizabeth32...   I don't see anything wrong here right now.

  Of course, you should try to avoid using the power button while XP is running or you may find yourself with a message like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Microsoft support engineers will offer you so wrongly you use KB307545, but you should never "start" it when you see this message.  It is however the first article coming KB in a search engine Bing of the error, but it is unlikely that is going to be the problem...

  On the contrary, if you see this message, you should start with a chkdsk/r from the XP Recovery first, Console and that will usually clear up the problem with the NT (NTFS) file system resulting from the interruption of the power supply.

• Windows starts only in safe mode after refomatting

  I reformatted computer my husband, during the process of re-setup the computer shut down & restarted in safe mode. I can't the computer to start Windows normally, it starts only in safe mode or at least what looks like safe mode. I am trying to install Windows XP Home Edition. I was not able to install any device to connect to the internet on this subject, so I can install SP3.

  Can someone help me solve this problem please

  Hi Malinda1979,

  Since you formatted and installed windows, its non-secure mode. Try to install display drivers. You can check if the display drivers are installed correctly click Start-> settings-> Control Panel-> system. Hardware-> display adapters. If you have any yellow exclamation next to any device, you must install the drivers.

  I hope this helps.

  * You need to install all the drivers of your motherboard / driver cd (which came with your pc), including the chipset, sound... etc.

  If it's a laptop brand / Office (HP, Dell, Acer, etc), you can visit the manufacturing site and select the model and download the latest orders.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Computer starts only in safe mode

  I went to stop my dell studio 1737 last night and it is stuck on "shutting down" and so finally I used the power button to turn it off, and now it will only start in safe mode or safe mode with network.  My restore disk is in stock somewhere as I just moved it background.

  Can someone help me solve this problem without the ERD?  I made the diagnosis and it passed everything.

  Hi KDWilson,

  1 did you recent hardware or changes to the software of the system?

  2. you receive messages or error codes when you try to start in normal mode?

  Because you can start in safe mode, you can try to perform a system restore and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

  Original title: computer laptop (Windows 8) starts do not

  Laptop: Sony Vaio

  Processor: core i3 with 4 GB of memory
  Operating system: Windows 8
  Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
  I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
  How to solve this problem?

  Hi Sunil,

  Thanks for the reply.

  I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

  Get help from Microsoft Windows activation

   

  https://support.Microsoft.com/kb/950929?WA=wsignin1.0

  Let us know if you need assistance.

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  How to see pictures of my camera ge on my computer toshiba laptop Windows xp

  ====================================
  Something to try...

  Connect the device to your PC via a USB cable and turn
  on the camera... If open windows... Close them.

  According to... to... Start / my computer... the camera can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / desktop media slots...
  Drive should be listed under... "Removable disk" with a drive
  letter.)