Computer not seeing browser or modem

My computer was not see browser or modem, trying to find answers, I stumbled on something that told me "Connection Firewall blocks FTP ports needed. Then he told me to go to control panel, internet, security options, he said levels should not be higher than the average because it is firewall block. I then went to Windows Firewall and programs to add, I saw "Internet Explorer", but he was not on the list of Exceptions. I would like to know if I should add "Internet Explorer" to my Windows Firewall Exceptions tab list. " This could be the reason why my computer was not "to see the browser or modem?

Hello

The computer is not a browser. The browser is a program such as Internet Explorer, which is used to browse the Internet.

You must add except firewall so it will not be blocked by the firewall.

If your computer is properly connected to the Internet and that you run Internet Explorer, you should be able to navigate.

If the computer has a valid Internet connection, so the browser won't be able to connect to the Internet and will produce an error message.

Read this page on the connection, the party concerned to you belongs "Computers Connect in different rooms to the Internet".

http://www.Microsoft.com/windowsxp/using/networking/setup/wired.mspx

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • Why my laptop does not see my cable modem?

    I am trying to fax to e-mail, but my computer can't see my cable modem

    Hi Ateam_03,

    This problem is related to the ISP that is why you may need to contact you are internet provider (ISP) for assistance.

  • WRT54GS do not "see" modem, but the two seem to work fine.

    Router: WRT54GS V7

    OS: Win XP

    Router was fine since it was installed (months; can't remember how much).  Had to reboot a couple of times, but not a big deal.  Today, he suddenly decided that he can no longer see my DSL modem.  All of the lights on the modem; all necessary lights are on the router, but they can't talk to each other for some reason any.

    When I connect the modem directly to the computer, the internet is fine.  When I hang in the router, LELA tells me that he has no internet connection.  Troubleshooting has followed to the letter, no luck.  Tried the instructions to set up a DSL connection (where you change 192.168.1.1 to 192.168.2.1), but it was a mess.  Reset the router, no change.

    I'm not a geek, so I don't know where to go from here.  Can anyone help?

    Steph VG

    Thanks for your solution.  I had actually done everything several times without success.  I had reconnected a lot more quickly as I rec'd an answer here (don't mean to be in a bad mood, just it is the reality of what I do), so I contacted the Linksys customer service and it turned off don't not to be a hardware problem at all; I downloaded the latest version of LELA and everything, it was fixed.

    In any case, thank you for taking the time to answer and for your help.

  • I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

    I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

    I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

    Thank you

    Harshad João

    First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

    There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

  • Windows 7 not seeing computer XP on the WORKING group

    OK so I have 3 computers at home using three different versions of Windows:

    Desktop computer - XP

    • This computer is connected to the internet via a cable modem. The cable modem has a router NETGEAR Wireless in tandem.
    • This computer can see portable #1 and portable #2 in the WORKING group.

    #1 - Vista laptop

    • This computer uses its wireless card to connect to the network.
    • This computer can see Desktop and Laptop #2 in the WORKING group.

    #2 - Windows 7 laptop

    • This computer uses its wireless card to connect to the network.
    • This computer can see portable #2, but can NOT see of desktop (running XP).

    All computers are in the WORKING group. I have the Windows Firewall on all three. For the life of me I can't understand why Windows 7 does not see the XP computer. Windows 7 has been updated with the network discovery and public folder sharing (explaining why the other two computers can see it).

    Any ideas?
    Thank you.

    Hi GVaron,

    Change the settings of firewall on Windows 7 computer and check to see if that allows you to view the Windows XP computer.

    Also, follow the article given below to check the networking between the different versions on Windows.

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My new computer, Itunes can not see my Iphone

    I downloaded ITunes on my new Lenovo computer with Windows 10 and when I connect my iPhone to ITunes synchronization do not see my phone.

    Try the iOS device is not showing in iTunes for Windows.

    TT2

  • Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

    Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

    Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

  • Qosmio G30-161: can not see the second HDD in my computer

    Hello
    can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
    as I got when I bought the laptop.
    but for some reason when I go into my computer I do not see the 2nd HDD.

    There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

    Hello

    Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
    I guess you can see a single HARD disk due to the RAID settings.
    The unit supports RAID technology.
    I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
    Generally, it should be possible to disable the RAID.
    Check the folder utilities Toshiba.

    PS: It is possible that you will lose data after changing the RAID settings. Be careful.

  • I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    Can she be seen by disk utility (and which version of Mac OS X is)

  • Computer can see wireless but does not connect

    I have a new HP EliteBook Folio 1040 G1 running under Windows 7 64-bit. The computer can see the wireless network, but when I try to connect to them I get a pop up saying "Wireless: assocaiting" followed by a saying "Wireless: disconnected" and the connection never works. In this case connect to any wireless network. I know that networks and passwords are correct, because my phone and iPad can connect to them without problems.

    I've updated all the drivers via Windows Update and also the SP support Assistant. I tried to uninstall the wireless driver and allowing windows to discover and install from scratch. Nothing seems to work. I see a similar thread a few years ago in the forums but no resolution. I never got so so boredom before wireless connection and I can't help but suspect a hardware failure.

    Can anyone suggest anything?

    Thank you

    Phil

    OK, I realize, but this cannot help others, after raising a warranty with HP call, it turned out that my problem was hardware after all. HP sent a technician to replace the network card, but when he opened the laptop, it turned out that the antenna is detached from the card wireless altogether and reataching it solved the problem.

    Like I said, probably not much help to anyone because it was a specific question, but I thought I would post the result anyway.

  • why I can not see servers on browser san andreas multiplayer?

    When I open samp (san andreas multiplayer), the servers just do not: O an idea why? And I now have windows vista (service pack 1).

    I reinstalled the game several times and still see no servers

    Here is the picture of my SEPM browser if it helps:

    http://www.upload.EE/image/626713/samp_no_servers.jpg

    And when I add a server, and then verify that: I do understand no/x /.

    http://www.upload.EE/image/626775/samp_info.jpg

    Please respond to someone why I can not see all the servers and how I can fix this problem? Thank you.

    Hello Artjom1993,

    Thank you for visiting the Microsoft answers community.

    You will need to contact the manufacturer to determine the cause of Word to locate servers through the application.

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

    all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

    If I shut down the computer and plug... he sees the thing then turned back...
    I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
    any thoughts?

    Hi KK Waddell.

    Thanks for posting in the Microsoft Community.

    I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

    Before you start the troubleshooting steps, I need the information required.

    1 did you changes to the computer?

    2 did you receive an error message?

    I suggest you to check with the other USB port.

    I suggest you to see the links and check.

    USB port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    One or more USB devices may not work when you start your Windows XP-based computer

    http://support.Microsoft.com/?kbid=885624

    See also:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

  • I can not see some files on my network drive, but can browse their

    Hello
    One of our users are their files and missing files after the letter 'F' on their network drive. I checked on the server, and the files are missing on the server. However, I can browse to and open them. When I look in the windows explorer for this user, I do not see the folders and files passed letter 'F' But if I know the name of a file or folder that is there and manually type the name in the address bar, I can browse on him. For example, there is a folder named IBM. I see not the folder in windows explore. But if I type in the address bar (\\servername\username\IBM), I can see the contents of the file. If the files are there, but we cannot see them. So far only this user is having this problem isn't a question broad system.

    I activated the hidden file parameter and it is set to show the hidden files and folders. The server is a windows 2003 SP2 Enterprise

    Thanks for your help

    In the Explorer of-> tools-> view (tab), Folder Options->

    In addition to checking "Show the hidden files and folders", try unchecking the "Hide protected operating system files" two lines down.  It will ask if you are sure you want to do this - simply replies 'yes '.

    If it turns out that the system attribute has been applied to the file, you will not be able to change it in the Properties window.  You will need to use the "Attrib" command  See the following procedure article:

    «You cannow view or change the read-only or system attributes of folders... under Windows XP...» »
       <>http://support.Microsoft.com/kb/326549 >

    HTH,
    JW

  • I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong... As you do not see the weight...

    Installation of window 7. ! With a problem! Help, please!

    I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...

    As you do not see the weight...

    Please help me!

    • 512 GB of ram with a Flash ram Drive his 10
    • Windows aero does not support "as the scan did not say very important hahah: D.
    • Intel Inside Pentium 4
    • Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
    • 149 with Flash Drive 500 GB hard drive

    Help, please!

    PS. Mr. need help! D:

    I can run vista Basic that lol

    I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.

  • Router sees Officejet 6700 computer Win7 sees the router computer does not see printer

    All-in-one printer, HP Officejet 6700 sees Motorola Netopia DSL router model 2247-N8 (and vice versa). (The printer takes a valid IP address via DHCP on the appropriate wireless network and the router is able to ping the printer and sees the printer as a device on the wireless local area network). The computer Dell Studio XPS 9100 years under Windows 7 Home Premium sees the router and is able to surf on the web. The computer cannot see the printer, by rattling through or printing software HP and doctor Scan. I don't know where I have to turn at this point. Direction and/or messages, please? Thank you.

    Oh, geez, too bad, I feel on this great * holds the thumb and forefinger about a half inch apart *.

    Anyone else having this problem, please be sure that in your router under wireless security settings, that you not block fill wireless. I thought (Yes, right!) that what is called simply toggling of bridges for the scope, but with this router wireless at least, it blocks all traffic between wireless clients. In this case, it was blocking traffic between the client and the client computer wireless printer wireless.

Maybe you are looking for

  • Firefox maxing out connection to 173.194.28.48 on its own

    I tried to understand what uses a lot of data over the last two months. He had a little used while we were out today. Summer look at resource monitor a little and I saw just Firefox start maxing out the connection to the Google IP 173.194.28.48 stead

  • Connection monitor extra/DVI-I connection EVS-1464 (showing the front panel)

    Hello Developing a Vision System using the following: LabVIEW 2010 SP1 LabVIEW 2010 SP1 real-time Vision development 2010 SP1 EVS-1464 My question is: How can I view my front panel, running on the Exchange virtual server on a monitor connected to the

  • Nine work problem

    When I try to open the works 9 Word processer, a message says "work of Mircosoft cache of police has stopped working ' and directs me to look for a solution online. When I do, a message that "Works cannot access one or more files it needs to run WP.

  • BlackBerry Smartphones a few questions a new user

    I receive a Blackberry Curve 8300 for work using the Alltel network. I still use a BB, but I have to learn pretty quickly if I can help around our offices. I have a few questions 1. each BB has wifi capabilities? Specifically the 8300? Specify this B

  • combining paths with object

    I have a lot of shots that I need to add a shape. I thought that if I converted paths to objects that I can use Add to shape area. It does not work. Thanks a lot for your help! I use cs3.