Computer portable HARD drive corrupted and all missing HP software

Similar Questions

• The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  Try a different download link

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• Windows 7 computer portable HARD drive connected to a professional XP S3

  Windows 7 computer portable HARD drive connected via USB to a desktop XP Professional SP3 PC.

  PC shows the folders, I have access to the folder of Photos, but cannot access the Documents folder where files I need. I tried to share the folder, but it does not work.

  Any suggestions please?

  Probably, this can be corrected by taking possession of these files / directories.  Once you do this, however, you will find probably your permissions in disarray try to re - install the drive in your computer to Windows 7...

  "How appropriate a file or a folder in Windows XP"

  <>http://support.Microsoft.com/kb/308421 >

  HTH,

  JW

• VIsta OS in the new computer portable HARD drive - how?

  I inherited computer hp laptop pavilion dv 2000.  HARD drive failed and I intend to replace.  I have not the original OS software disks-how can I get this thing going?  It is Vista home

  Hello

  Contact HP and get the OEM Installation disk and make sure you know your product Code. You need
  the OEM version that everything is fine. You "might" be able to get Windows 7 for your system however
  It will be more 'IFS' available.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• computer portable HARD drive

  My motherboard the HP G56-130SA died on me and I want to take out the HARD drive and install in my office to copy files on. Can anyone put me in the right direction in order to get an adapter (the United Kingdom) which will connect the cable of the HARD disk on my desktop SATA? Preference in-House then I can reuse as a spare drive!

  Have the same problem with the slimline DVD drive. I got a lead for the SATA but not the power cable.

  The DVD player has a different connector. 'S called it miniSATA.

  computer laptop optical mini-SATA to SATA Adapter regular

  However, a (SATA) hard drive of the laptop connects to the same connectors SATA Office. Same data and power cables. If your portable player seems different, it is just in a basket that had to be removed to expose the naked reader or has a connector on to attach to the motherboard for the laptop. I assure you that there is a regular SATA drive. Just open the side of the desktop and connect a SATA cable data and power on the drive from the laptop and the other end to the mother/power supply card and the reader will register and you can copy files over, it pick up when you're done.

  Many jobs now have a support to mount a 2.5 drive inches (mainly for the SSD) but if yours doesn't, you can get a 2.5 inches for support adapter 3.5 inches like that and permanently mount the drive of the laptop in the office.

  http://www.Amazon.com/2-5-inch-drive-3-5-inch-plastic-adapter/DP/B0061GEORW/ref=sr_1_1?ie=UTF8 & qid = 1406062417 & SR = 8-1 & Keywords = 2.5 inch + to + 3.5 + inch + Hard+ Drive + adapt

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I need to back up an entire hard drive, XP and all

  I replaced a strong record for my neighbor and found myself in a strange position. I need to back up the entire hard drive, so I can replace it with a larger, but cannot start on this disc (when its in my computer) because of a BSOD. I can start in my regular reader (the one I normally use in my computer) and browse the disk I'm trying to backup with no problems. I tried to use Norton Ghost, but when I try to boot from the new drive, I get an error and cannot continue. That I can use that backs up the entire disk, including Windows XP and all the files and allow me to boot from it?

  4ndyC2D,
  Microsoft didn't offer not any type of disc for XP Imaging tool.  At this point, you will need to use a 3rd party program to accomplish the task.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Image portable HARD drive for transfer to the new computer portable HARD drive on the same laptop

  Location:

  Laptop was to receive the new HARD drive more big;

  Configuration is complex and has a lot of data and SW engineering.

  Own re - install would take too long.

  In operating systems earlier I just created an image, installed the new HARD disk and restored the image.

  In Vista, it does not. New HARD drive with image does not start. (Partition is correctly selected as active)

  Tried other methods, including Robocopy but without success.

  Sysprep is the right solution? If so, how will this affect users profiles and installed applications?

  Thank you

  Paraxis

  Hi Paraxis,

  Whenever we use the system image and restore from it, the hardware must be same, as has already been made to backup. The hard disk partition should also be in the same size.

  You can use Sysprep on your computer and check if that helps you solve the problem.

  Preparation system (Sysprep) tool is a technology that you can use with other deployment tools to install Windows on new hardware, operating systems. The Sysprep tool prepares a computer for imaging of disc or delivery to a customer of the configuration of the computer to create a new computer security identifier (SID) when the computer is restarted. In addition, the Sysprep tool cleans up user-specific and settings specific to the computer and the data that should not be copied to a destination computer.

  Access the links below for more information on Sysprep.

  http://TechNet.Microsoft.com/en-us/library/cc721940 (WS.10) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc766514 (WS.10) .aspx

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer portable hard drive does not recognize as a folder bunt wants to use a program to open it

  theres no error code my computer is tying to use my drive external hard announces a file and not a folder and he wants to know what kind of program to open it with, but I can always access it by using the address bar, typing F:\ which is the only way I can without unplugging and plunging in and wait for my computer to ask me what to do with it.

  Hello 5142,

  Thank you for your message.  Please follow the steps below and provide feedback so that we can better help you get this issue resolved.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  With regard to your reader, what do you see?  See you drive 'F: '?  If this isn't the case, you can assign a drive letter?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• haveback upward through windowsliveonecare for computer, external hard drive wentdown and now wantto get back to the top but new computer does not recognize the direct care

  drive external upwards using a windows live care, computer went down and now cannot recover save as new computer says it does not recognize backup Installer direct care. How doi recoverbackup on the new computer.
  Thank you
  E-mail address is removed from the privacy *.

  Hello

  Webcam Live One Care is no longer available.

  Please read the information contained in this thread about your problem (Steve Boots information link):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-have-uninstalled-OneCare-and-would-like-to/d2d196a5-e46f-4E48-9d94-5c217f758134

  See you soon.

• try to reinstall CS on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. My hard drive crashed with all my software on it, then

  Hello - I'm trying to reinstall CS3 on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. (compatibility).  My hard drive crashed with all my top software, so I replaced the drive and now trying to reinstall my CS3. How can I do this without an internet connection? It will not take my initial activation codes, and this computer is not online. pointers out there?

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to use Ready Boost, and what are the requirements for the use of portable hard drives and flash drives for use with Ready Boost?

  I have Windows 7 64 bit Ultimate Edition and try to get Ready Boost to work on my PC using portable hard drives or flash drives. I have 2 portable hard drives (iomega 120gig, Seagate 250gig) and a 8gig sandisk cruzer flash drive. All this deterioration when you try to use the ready boost said that these discs only are not compatible or not supported. So what do I need?

  Not all readers will work with ReadyBoost. There are some readers who actually will specify that they are capable of ReadyBoost.

  By WikiPedia:

  • The device should have an access time of 1ms or less.
  • The device must be capable of 2.5 MB/s for 4 KB random read speeds indicates the spread uniformly across the entire device and 1.75 MB/s write for 512 speed random writes spread uniformly across the device.

  You must also put the device and let it plugged in for ReadyBoost. ReadyBoost is therefore best suited for a small thumbdrive (up to 4 GB) that greater thumbdrive or external HD that you would probably be disconnect from time to time.

  Open solutions Explorer window, find your Cruzer - right-click on it and click Properties. If there is a ReadyBoost tab, you can set up - set it to dedicate this device to ReadyBoost. It will be implemented and save a file on the USB key. Click Apply and're you good to go.

  A caveat which I can testify first-hand. Apparently while booting, Win 7 has trouble with some USB key - it will search the thumbdrive, the operating system, the process of starting to stall and you say: ' Missing Operating System ' - Fortunately the solution is very easy. Shut down the computer, remove the USB key, restart the computer and it will start normally. I had this happen with a 8 GB Cruzer. This seems to be a random thing, because I had the Cruzer plugged in and booted several times without encountering the error of missing operating system message. No idea why or why it is injury. Currently, I use a Kodak USB 2 gig key that seems to work very well.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.