Computer recognizes the printer, but does not install

Similar Questions

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

  I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

  A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

• HP 5740 all-in-one: computer recognizes the printer, but not to scan

  My computer HP Envy Phoenix 810-470pc will print and fax, but not to analyze my HP 5740, I can scan from the printer and send it to the computer, but cannot scan to the computer, I reinstalled the software and it hooked up via usb, but it still does not work. Windows 10.

  Welcome to the HP community @retiredrudy,

  I read about the problems you are having with the scanning from or to your Officejet on Windows 10 5740. See the link below and try all the steps in order and you should be able to scan in progress!

  Let me know if you encounter any questions!

  HP printers - "no Options of Scan" or "scan settings do not value" message (Windows 10)

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• Ping the computer of the user but does not '\\user\d$ '.

  Hello friends,

  I have a problem according to the files and folders in my network.

  A Client PC using windows xp. Ping PC correctly but the '\\user-PC\c$' does not. Also not connect to vnc viewer.

  Hi David,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you have problems to access the XP client computer.

  The question you have posted is related to networking, it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  I hope this helps. If the problem persists or all linked windows queries or issues related to the Windows operating system, please get back to us. We are here to help you.

• software for the printer driver does not install

  My printer is C7100 all-in-one.  My OS is windows 7 - message comes back "could not install any software.

  I recommend traverse "Programs and features" in your control panel and manual uninstall of the printer, then shut down and restart your computer. If the files do not uninstall, then you can have a deeper problem with your operating system.

  Once the software is missing, try again after the above link and by installing the full setting software.

  Let me know!

• Acrobat install registers with the programs, but does not install.

  Manager Adobe Creative cloud to create a package that contains ONLY Acrobat Pro XI.  Everything seems good.

  I have uninstall all traces of Adobe products on Windows 7 Pro system, even using the AdobeCreativeCloudCleanerTool to remove completely all adobe products.

  Then I run the installer from the Build directory and the product of the facility, apparently with success.

  Once completed, the Add/Remove Programs, control panel database lists the application, but there is no start for her menu item and I can't locate an executable on the hard drive AT ALL.

  Can someone tell me how I'm supposed to install the product for the actual USAGE?

  Thank you!

  Hi LeeWHBM,

  As you mentioned that you want to install Acrobat XI as a part of the creative cloud, please note that Acrobat is installed through the Exceptions folder and not build. Please see the link below:

  http://helpx.Adobe.com/creative-cloud/Packager/deploying-Acrobat.html#installing Acrobat Windows

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• Firefox extract the files, but does not install

  tried to 38.0, same behavior now 39.0 38.5. Relatively stable Windows 7 64 bit machine

  Are you what message as to why?

  Start your computer in safe mode with network. Then start
  the installation program.

  Start the computer in Mode safe;
  Free online encyclopedia

  You may have ad / bad-ware. More information can be found in the article troubleshooting Firefox problems caused by malware .

  Run most or all of the listed malware scanners. Each works differently. If a single
  program forget something, someone else can pick it up.

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• print jobs in the queue from the computer to the top, but do not print

  1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

  chrismcgo wrote:

  I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

  I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.