Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

Similar Questions

• my computer says the sound works, but I don't hear anything, what should I do?

  my computer says the sound works but I hear nothing and now I'm trying to raise my volume and it does not work as well... .What do I do?

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• How to set up a USB Microphone and a headphone audio jack at the same time on Windows 7?

  I recently bought a CAD u37 USB microphone for use in various records and a commentator game on Youtube when I came across a problem. When I plugged the microphone all other sounds immediately extinguished and I couldn't hear the game. I tried to unplug and re - plug in the headphones and the microphone, even play with no helmet without result.

  I did some research and found out it's because the microphone is automatically configured for audio input and output and the card sound/headset, not having a configuration. I've recently considered buying a $5 female jack audio converter USB to work around this problem.
  Will this work, or just be a waste of money? Are there simpler solutions like a flick of a switch of audio control panel configuration? Are there any programs that will allow me to configure the audio and input output? Is it still possible? Thank you!

  Hi Ben,

  I suggest you try to connect USB female to the converter audio jack, this should help to solve the problem with simultaneous USB microphone and audio input jack using headphones.

  If you have any more questions, respond to this post with the State of the question. I'll be happy to help you.

• Computer recognizes the printer, but does not install

  Original title: printer / driver problem

  My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can follow this link completely and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• Can not get the printer to answer (Dell P703w) printer is turned on, is recognized by the computer as the default printer, but when I try to print a page - nothing happens

  Printer is turned on, is recognized by the computer as the default printer, but when I try to print a page, I get nothing. Have you tried "Troubleshooting" and it says I have 3 items in the quieh that prevent printing?

  Hi, Mike,.

  A moderator has moved this thread to the hardware and drivers Forum.  Note the drop-down menus by clicking on the links below.  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware

  Save the documents you want to print

  Open the Printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the print queue

  Start > type services.msc

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the Service

  Close Services window

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the IEEE... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Computer reboot and Windows will reload the drivers

  Back to Services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the Service

  Services nearby

  Try printing again

  Go to the manufacturer's website and search for driver updates

• Equium A210-1AS - Windows7 does not recognize the sound card

  Since the upgrade to windows 7 programs do not recognize the sound card.
  My laptop is Toshiba equim A210-1as.

  The sound is ok on the speakers.
  Any help would be appreciated.

  I downloaded the last Reatek'a drivers and install them.

  Concerning
  Mike

  Hello

  I think you didn't use the right card driver

  The sound chip comes from Realtek and you need to reinstall the Realtek audio driver for the audio.

  Check this box!

• CD badly placed: is there anyway to restore games on the computer without the CD, we have the Product Code but not the cd, we have misplaced it?

  There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?

  There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?

  borrow the CD, install the game and put in your code. If you don't know anyone with a CD, you will need to buy the game again. teengeek.freehostingcloud.com

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. All the opti

  .. .and the same thing here, I apparently just typed in the header...

  Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. The options seem to grow the CC, but would like to know if there is any means possible to get the version stand alone more. Thank you in advance!

  Frustration is closer...

  There is still an option purchase on https://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_mostpopular.html

  Make sure you only select between upgrade/Full and Mac/Win.

• I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  I have the Prime Minister but not encoder and im trying to export videois to how put it on dvd

  You must follow the instructions to download/install Encore DVD creating program, as long as the content of the library and put in place so that when you open it, you have all the stuff to work.

  Article download/install Adobe Encore:

  https://helpx.Adobe.com/Encore/KB/Encore-CS6-installed-cc.html

  http://helpx.Adobe.com/Encore/using/download-library-content.html

  Neil

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge