Similar Questions

• Could not turn off the computer error: program not responding

  Original title: Power off the computer - Windows E

  When I try to shut down my computer, I get a box that says that the program is not responding.  I can stop by pressing the "Exit Now" option until all blue bars shortly arrive in the window.  In the contrary case, it crashes and I have to start over.  My system is Windows XP and my notes show there have been references to the two programs on the error message - #678 and #F14.  It's a minor inconvenience, but I want to fix it.

  THX,

  RonVV

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Windows stops responding during Windows XP closed: http://support.microsoft.com/kb/307274

  Method 2: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

  Hope this information is useful.

• Programs not responding not / icons disappeared after picking up a virus?

  Hi, I recently got a virus (XP total Security 2011) it seems who performed almost all of my programs, not race, my favorites and desktop icons disappear. I managed via the taskbar options click on the hidden folders option and now they are visible again, but transparent.  If I click on mp3s and Itunes works but practically nothing else.

  Ive checked some forums and tried regedit, but that is not responding.

  I managed to open internet explore without Add ons however if that helps

  all ideas

  Many thanks richard

  Hello RichardBraz,

  You must remove the virus from your computer before we continue to fix the problems with the desktop icons and programs.

  I suggest you try a run the Scanner in safe mode of Microsoft. To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  You will want to choose "Safe Mode with networking" If you need to connect to the internet or your network.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  I hope this helps.

  Marilyn

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• I bought Photoshop previously, which was an installation CD, but I just got a new computer, which is not a hard drive. How can I reinstall the program?

  I bought Photoshop a couple of years, which was installed by the CD. However, I just got a new computer, which is not a disk drive, so I can't reinstall the program. Is there a way I could download it with the serial number, so I can still have the program on my computer?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• (all the) programs stop responding for 30 to 60 seconds. He just put in 1 GB of additional ram, does not solve the problem

  STOP AND GIVES PROGRAMS (PROGRAM STOP RESPONDING BACK TO TOP.) WILL BEGIN TO WORK SOMETIMES, SOMETIMES IT FREEZES THE SYSTEM. WERE ALSO TWO WPD FILES VOLUMN DRIVER LOADED, I UNINSTALL THE 2ND ON (THE WHO CANNOT LOAD AND LET THE FIRST (DRIVER WORKING) INTACT.?)

  Well, I'm glad that your problem has been resolved. If you wish you can mark your post as the answer so that other users know your problem has been resolved. Have a nice day Walter!

• Programs not answer - should force the closure

  A lot of my computer programs keep locking up. The only way to get the system working again is to turn. I have no idea what is causing my machine perform this way & it runs so terribly slow. First of all what happens is there is this pop-up window & it downloads slowly or won't load at all. Then I try to close it will not close & then say it's "not responding". Just what is the cause? & Please try to explain in the simplest terms possible.

  Thank you.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen: c000021a autochk program not found

  original title: program autochk not found - skipping AUTOCHK "Followed by BSOD" STOP: c000021a {fatal system error} Session Manager initialization of the system responding ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Hello everyone I am desperately need assistance. I'm running under Windows Vista Home Premium 32 bit SP2. The computer is a HP Pavilion Media Center TV PC m7680n.   About 5 days ago my antivirus software, Avira, picked up a malware infection at the site of Windows/System32/drivers/mountmgr.sys. Like a fool, I decided to delete the file and call it a day, but the second that I made my computer immediately deleted and I was forced to close. When I started again, I was greeted with this error message 'autochk program not found - skipping AUTOCHK', which was then followed by a container BSOD:

  STOP: c000021a {fatal system error}
  The Session Manager initialization system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Since then, I tried to boot from any available including the last known configuration safe mode options but I am confronted with the same BSOD and error message and am not able to access the desktop. I also tried all of my drive to Installation of Vista startup repair options, but it says it cannot determine the cause of the problem.

  I also tried to use system restore but it is said that "no restore points were created on your computer's system disk.

  I also tried using the command prompt and enter the command chkdsk with all the options available, but it cannot detect errors or problems. I also tried to use the Bootrec command with all available options, including the reconstruction of the BCD from scratch, but that no longer works. I also tried to use the sfc/SCANNOW command but it cannot start because I get an error message indicating that "Windows Resource Protection could not preform the requested operation." I also tried to replace the file mountmgr.sys since a separate installation of vista through the command prompt by using a floppy disk, but alas it does not solve my situation.

  There are a lot of files and personal information about this computer that I consider valuable for me so please give as much advice and guidance as you possibly can which can help save my OS without having to wipe everything. Also, it's my first time in this forum post, so if I've left out any important information so please let me know and I'll try to give it too you. By the way, I am also what you would call an extreme novice with these sorts of things so be as complete with your descriptions as possible. Thank you.

  Hello

  Go back and use the troubleshooting guide I posted above - top to bottom. And indeed will need you
  technical help in a real store of the computer (no leeks and glances at a BestBuy or other BigBox
  stores) or system manufacturer support.

  Startup Repair can help.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• sdnclean64.exe program not found - skipping Autocheck

  sdnclean64.exe program not found - skipping AUTOCHECK

  I get this error at the start of Windows 7 Home Premium. Anyway I can get this executable so Windows will do his boot cleaning function?

  Thank you

  Chris

  Thank you for responding.

  http://www.TomsHardware.com/Forum/349353-33-help-system-randomly-crashes-installing-7870

  There were known issues with this particular GPU from ATI/AMD.  Surprisingly, the card works fine with an old motherboard Asus, I have in a previous version. Given that the system has an activated copy of Win 7 Ult on it, I still have in service and access it through my main machine via the desktop remotely (product activation and DRM took some of the fun of upgrading material - I see it as an evil necessary.) Companies have the right to intellectual property, but it becomes more expensive to upgrade if you need to buy a new license every time you change on your motherboard). The guys at Asus even suggest to use an older driver for the card on my main machine. I submit all my screenshots and a dersription of the problem to technical support at AMD. If all goes well, they'll find a fix fo as they did for the TLB bug Phenom processors original back in early 2008.

• iTunes will not random on my iPhone6S after updating IOS

  My iTunes will not BE NOT random at all after I did this 10.0.2 software update!  I mean, if I hit random play on one of my playlists, does not choose a song randomly on the reading list and literally play it over and over and over again.  Basically, it does the OPPOSITE of brewing.  It is a major problem and my phone and my iTunes worked very well before this update! Suggestions?   Please?   Or, is the way to Apple, this to trick me into buying a whole new phone?

  Hello Vesper40,

  I understand that, despite trying to mix a playlist, your iPhone is just to play one song of this playlist repeatedly. In such a situation, you may need to disable the screen playing snooze in the music app.
  

  Control playback. Tap a song to play and show the MiniPlayer. Tap the MiniPlayer to display the now playing screen, where you can do the following:

  

  Repeat steps. Glisser slide upward, then press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  See you soon!

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  Visual studio runs (.exe) file can run in the other computer where did not install visual studio?

  I use a visual studio 2012 to make a program file,
  This is a file to execute, which is my generated program file.

  I can throw in another computer in which another computer has not installed any visual studio?

  Thank you

  Hi Chi,

  The question you posted would be better suited in the MSDN Forums since we have dedicated to this support; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vslanguages, vstfs, netdevelopment, vsarch

  Keep us updated on the status of the issue.

• When I start my computer, it does not ask for my password and it does this since I got it!

  Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!

  Hello mk_wolf_69,

  Please see the link below with respect to automatic logon.

  How to enable the automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

• Receive the following start-up error message up to: 'sasnative32bddel.exe program not found - skipping autocheck.

  Whenever my computer starts it gets to the 'microsoft corporation' green loading bar then displays this message 'sasnative32 program not found - skipping autocheck. She disappears and start the computer as usual. How can I stop this from happening?

  I am running windows vista business 32-bit

  I found that the... entry sasnative is implemented by Lunarsoft software (I wonder if they are related to Lavasoft).

  If you had a few Lunasoft stuff installed and uninstalled lately, it sounds like it is not cleaned up after himself.  It's the same thing that happens with software Lavasoft - lack of hygiene.

  You must eddt your registry database and change this:

  autocheck autochk *.
  AutoCheck sasnative32bddel.exe

  At the entrance of XP by default, which is the following:

  autocheck autochk *.

  Just position the cursor and delete the entry so it's back to the normal and reboot.