Computer returns to the Welcome screen instead of stay on the desktop. repairable?

Similar Questions

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Why muse keep returning to the desktop on my ipad version

  Hello. Can anyone help.

  I made a Web site using muse and I created a version of office, and a version of the Tablet, but after viewing the page once on the Tablet, he then returned to the version of office that does not properly fit the ipad screen.

  Hope someone can help with this bug.

  This post may be useful Re: Mobile Version instead of office>.

• Help on the portable computer connection on the desktop and router WRT610N

  I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

  Try this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  2.4 GHz wireless settings:

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

• Vistas froze after installing music. How can I return to the desktop and start menu?

  I installed I Tunes and the computer froze. I either get a boot manager and repair cannor black screen or a blue screen with a message from recently installed warnng software is causing windows at startup of the ot and uninstall.  HPW can I take the Office of the screen so I can't enter the Panel, programs and features?  Help! Just to note, I uninstalled and re-instralled I Tunes twice because it was what information I uncovred to try.  But the screen does not move to the deskton screen and start menu. Any help would be appreciated!

  Hello

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• BlackBerry smartphones is possible to manually list contacts copy of the bold 9900 to computer without using the Desktop Manager

  As the title suggests it is possible to copy the contacts from the bold 9900 list uses windows exlorer to the computer? I can't install DM on the computer.

  Please let me know

  Victor

  Hello and welcome to the community!

  Unfortunately, not... the BlackBerry Desktop Software is required to retrieve information about the device protected databases. They are not available in Windows Explorer.

  What is happening with not being able to install DM? Something goes wrong? Or you may even try?

  Good luck and let us know!

• Smartphones blackBerry 8520 stuck on a single page, the grateful computer but not the desktop software

  I did a soft reset on my phone as I do from time to time when my provider has had problems since I have need of you reconnect and so on.

  When she came back, on the screen was one of these application permissionmessages you get when you load on an application asking if you want to allow the application - in this case free Phonelocate to receive the sms_receive_messages? Nothing was unusual that come on except it would not turn off, it would not allow me to scroll or more of this message (or even in this post by the way), no calls cannot get through, no warning, no nothing. He is stuck on this message and I can't use my blackberry at all.

  I tried to do a soft reset several times, tried to make a double soft reset, tried to take the battery for an extended period of time. I tried to connect to the computer to see if I could reload the OS and see if that would help, but while the computer and blackberry Device Manager it recognize the blackberry software is not and continuously says connecting until it times upward and asks me to try again.

  I can't do a wipe handheld because it requires me to be able to use my phone and I can't.

  So if anyone has any ideas I would be very grateful.

  OK, the "last" to you may not be the 'last' to me, or others. But I know that you get to this screen if you can't go past the permissions screen when you start.

  Try this, initialize the device a traction battery and when this permissions screen, press the ESC key once... that's the key to the right of the trackball. It should disappear.

  midnightmadness13 wrote:

  I have windows 7 64 bit and it is not at all recognize this command prompt. I have the latest OS on my bb.

  There is no command prompt, just the path to follow in a directory of the folder.

  Navigate to c:\program files\common research in motion\apploader and on Win7, in the apploader folder, simply click on "Compatibility files" to see if you see the file loader.exe.

  No matter what?

  If nothing yet, install BBSAK on your PC. You can use the function of cod 'remove' to remove the free phone app if you need.

• Computer crashes to the desktop when starting in normal mode

  After getting an input/output error.  The Office will be in charge, but as soon as you click on the menu start the hourglass appears and never goes away.  Seems to work in 'safe' mode using Vista.  I try System Restore and the "last known configuration.

  Hello

  Use the startup clean and other methods to try to determine the cause of and correct problems.

  ------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Windows 7 is extremely slow to return to the screen saver mode.

  I installed upgrading Windows 7 on my computer and everything is fine.  However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen).  It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.

  The system is a low end, but more than enough to manage w7.  It consist of:
  Pentium dual core (2140)
  2 gig memory
  NVIDIA 7300GT 256M

  I tried to delete the zone alarm security suite, does not solve the problem
  thought it was the HP 2610 print software, removed and still happens.
  update the bios (MSI p4m900)

  can someone figure this.  Is there something that prevents him to return to the desktop.

  Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return.  But I think also, it does not address key strokes.

  THX

  I found a way to fix it! I did this:

  1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.

  2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).

  3. restart your computer.

  4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!

  When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.

• Computer hangs on the installation of the Windows updates

  I was out of town for two weeks.  On my return, I turned on my laptop and downloaded Wondos 27 updates and started to install. However, when he started to install the update # 26 he hung up. It was like that for three hours. I turned off the computer and restarted. He said "starting windows" and then returned to say "Windows is installing update 26 27.» If please do not turn off the power or turn off the computer. !!! It's as if he's stuck in some kind of loop. How should I address this problem so the computer will start and not get hung up again? My computer operating system is Windows 7 Vista Premium edition.

  kbp944f

  Hi kbp944f,

  Step 1: Disconnect all external devices (printers, scanner, USB(universal serial bus) readers, etc...) Except the keyboard and mouse, then check if it makes a difference.

  Step 2: Start the computer in last good Configuration on the known (LKGC). To do this, follow the steps below:

  Access the Advanced Boot menu options by turning on your computer and pressing the F8 key continuously beforeWindows begins. Boot advanced options, select the menu LKGC

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Check if the computer boots to the desktop and let me know

  If the problem persists,

  Step 3: Try to startup repair

  Access the preinstalled recovery options on your computer > when the computer restarts press F8> on the screen Advanced Startup Options > optionSelect fix you computer >

  Click the first option to perform the Startup Repair

  (1) the Startup Repair:- Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing or damaged system files, that might preventWindows to start properly.

  Access system recovery options. Please see the steps mentioned in the link below
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Let me know if it works or you need help

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 0 x 80070003 is received after trying in vain to connect to the desktop computer.

  Impossible to system restore, image, & seek malfunctions due to 0 x 80070003. I can not connect with the normal mode or safe because of what I assume it is a mistake to cache.

  Yesterday, I had installed expatshield in order to view the Olympics on the bbc. My laptop works well throughout the day. I turned off around 12:00 and then briefly turned on at 12:30 and it turned off at 00:35, no problem.

  I SLEEP and then at 11:00 I turn on the laptop and a very slow connection to the experience screen. I restart the computer and use the Startup Repair tool and use the system restore. I am able to connect to the computer, but whenever I start a video game, the laptop has lagged. My computer had shifted and then close because I tried to do a system restore. I saw a cache error that the computer off.

  When I try to do a system restore or a computer imagine I get an error. "An internal error has occurred. The following information can help you resolve the error: the system cannot find the path specified. (0 x 80070003). I am now unable to use Startup Repair tool and sign in.

  My laptop is an ASUS 17.3 inch G73JW series games

  Processor is an Intel Core i7-74OQM

  VGA is Nvidia GeForce GTX 460 M

  laptop is a year and a month 7

  Hi John McEVE,.

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the System File Checker (SFC) to repair corrupted files.

• My icons and Windows Sidebar Gadgets on the desktop are suddenly very small.

  The electricity went out, and when we restarted the computer (Dell) all the desktop icons and windows and my sidebar gadgets are extremely low.  Can you help me to change everything back to normal size?

  Hello Carol24,

  1. open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.
  2. pursuant to the resolution, move the slider to the desired resolution, then click apply

  Here is one link: http://windowshelp.microsoft.com/Windows/en-US/Help/0386b009-5f30-45c7-80c8-ff0395cc24091033.mspx which will give you some

  Tips to get your quality return to normal display. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Paint, calculator changed and the desktop icon has disappeared from the start bar

  Paint my new windows 8 that I had to buy lost and calculator has no mode of the engineer and the desktop icon has disappeared and I had to click on any application and leave to return to the desktop. I had just restarted and updated a windows update and restart, which is good and after I on this once again, everythinig went wrong.before happened, I downloaded a cheat engine and I wanted to only uninstall using perfect uninstaller which also can not be uninstalled. Please help, can I send it to the factory without pay? I bought it just 3-4 days.

  Hi Jonny,

  Thanks for posting your query in Microsoft Community.

  I understand that you have with disappearing icons on the desktop and the start menu. We are happy to help you in the matter of fixing.

  Please follow the following suggestions to solve the problem.

  Method 1: Check if the Show Desktop icons is enabled or not. Follow the steps mentioned below to do the same.

  Right click on the desktop, point to view , and then click show the desktop icons.

  Method 2: This problem could be due to corrupt system files or viruses in the computer. So, you can try to test the problem in safe mode and see if that helps.

  Step 1: See the link to start in safe mode.

  Start settings for Windows (including safe mode)

  Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How do I perform a boot in Windows

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Also, try to run Microsoft Security Scanner to check if there are viruses in the computer.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Why can't I drag a file from the desktop to the folder of bookmarks?

  I am trying to sort my bookmark folders in El Capitan, so I drag the folder on the bookmarks file (after the edition of bookmarks in Safari) on the desktop, open it on the desktop and the sort.  When I try to drag it to the folder of bookmarks in Safari, the file returns to the desktop.  I tried using the side bar and the window, using option, command, control, fn and SHIFT while dragging, and nothing works.  When I output folder, it returns to the desktop.  To work around, I create a new folder in bookmarks, rename it, and then copy the bookmarks to the new folder.  Looks like I used to be able to just drag the folder to the Favorites folder.

  All solutions?  I have something on or off prevents him record a fall in place?

  When you drag a folder of bookmarks in Safari Bookmarks.plist location on your desktop, folder and its content is converted to different formats that Safari has no way to convert in the original structure of Bookmarks.plist.

• Restore the desktop icons

  All my desktop icons have changed the red square Adobe Reader icon. I tried to click right to restore the icon but not successful. When I deleted my computer Adobe all the desktop icons is back to normal. However, I need Adobe and downloaded this afternoon and all the desktop icons became again the red icon in Adobe Reader. If I click on Internet Explorer for example, message: Adobe Reader cannot open... blah blah... Help please... I don't know what to do and it's my fault, but I don't remember what I did to remedy... Sorry

  Of MVP Ramesh:

  http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

  MS - MVP - Elephant Boy computers - don't panic!