Computer screen remains empty when the computer is started.

Similar Questions

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck

• Satellite A100-237 screen remains off when the lid is opened

  OK I'll try my best to explain this. My power settings are adjusted so that the computer has no effect when the lid is closed - except for the display, which is turned off and back on when the lid is opened (normal behaviour).

  Now, in rare occasions, when I opened the back cover, the screen doesn't come back, unless I close the back cover and open again. It is not a big problem for me at the moment, but I'm afraid that the connections of the screen with the motherboard by the cover have been damaged.

  BIOS version 2.00, maybe an update could solve it?

  Thanks in advance.

  Hi Ataberk,

  I think that your problem can be caused by the micro-switch that will detect when the laptop lid is closed. If this switch is in the open position so your screen will remain off even with the lid open. The idea here is that you can get the display by closing and opening the lid again.

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• Re: TV TOSHIBA 26EL800A - TV is on, but the screen remains empty

  Hi all

  I have a Toshiba TV 26EL800A purchased in May of this year. Tried to turn on the TV using the remote control mode standby (red light) to on (green light) that has the remote control - the screen remains empty (as there is no power) and after a few seconds the light changes again red - standby again.

  Tried this using the keys on the TV as well and the same thing (have checked batteries for remote control, checked PowerPoint (my dvd player works the same record 2 and it works) but don't know what else is causing the screen lights?)

  Any suggestions?

  I put t really know if you can find the solution here on the computer systems forum.
  What you can try is to unplug TV, leave for a while and check again.

  If the same thing will happen again and again I recommend to contact your local dealer and ask for help or contact the provider of Toshiba directly.

• Premiere Pro cs6 - video pane of the workspace remains empty when you try to view the imported files

  Hello

  I am currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it into the timeline, the preview area where you can review your cup video remains black. Double-click the imported file gives the same result. I was initially import files .jpg (about 300 KB of size for each) so I tried to import various other image formats - .png, .tiff, etc... I even imported a my scene movie file to determine if the problem was with my format of content. With video, the audio plays fine, but the video remains empty in the preview area. I tried rendering my workspace and change my initial parameters of the project, but to no avail. I went to my preferences for first and far as I know, everything seems fine.

  I use the software on a HP Pavilion, Windows 7 intel core i7, 8 GB of ram with a 2 GB of 650 M from nvidia card. Any help would be greatly appreciated. Thank you!

  Hello

  Have you tried to change your Video Renderer? It would be under the project > project settings > general. Switch option only the Mercury playback engine software and see if it helps.

  Thank you

  Regalo

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• What is the big number at the top right of the screen that appears when units media center starts?

  What is the big number at the top right of the screen that appears when units media center starts?

  most likely the volume control
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.".

  original title: 'Open with' problem...

  My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• Photo editing software Photoshop elements 12 crashes directly when the application is started. Do not download / no error message.

  Photo editing software Photoshop elements 12 crashes directly when the application is started.

  Do not download / no error message.

  My system: Windows 8.1

  All the drivers are up to date.

  Please can someone help me?

  I solved this problem by cleaning the folder C:\Program Files (x 86) \Common Files\Adobe\SLCache.

  Thanks Rave.

• When I turn on Satellite L350D-131 the screen remains empty

  When I try to turn it on on my computer laptop powers but the screen remains blank

  Hello

  I read a lot about similar symptoms of portable and in most cases users were abele to solve this problem by following this short and simple solution;

  -Unplug the power adapter, remove the battery
  -leave the laptop disconnected for a longer period of time (3-4 hours waiting)
  -then connect the two parts, and switch on the device.

  I think that should help if there is no serious hardware problem

• Computer screen appear not when the cover is open, please help!

  I use my 19-inch LCD TV as a monitor for my computer laptop windows 7, because the built-in screen broke some time it y a. yesterday, I changed the settings so that whenever I close the lid of the laptop, the screen is always displayed on the TV, but now, everytime I open the cover, broken laptop screen lights up and the connection to the TV is lost , but when I close the cover image appears upward on the TV again. I tried changing the settings I changed back. Anyway I can fix this without a keyboard? Because the only one I have is on my laptop and inaccessible without the lid open. Help, please!

  Hello Hipster,

  Being this recent, try a system restore to the most recent point when everything worked very well.  See http://www.sevenforums.com/tutorials/700-system-restore.html for more information.

  Good luck!

  Kosh