Computer shipped with cd burner. When I go to burn a cd, it says to connect the burner. In the properties of the device, it says this device cannot start (code 10)
Cannot read cd of either.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".
Windows does not work with my DVD writer. This is the third I've tried and I get the same error message in Device Manager. "Device cannot start Code 10". It shows the correct driver and BIOS recognized correctly as a SATA drive.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ. The sound is integrated 5.1 audio channels. This works installed sense July 14, 2011. We now have no audio. After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?
Hi Jack,
You did changes to the computer before the show?
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.
I suggest you try the steps from the following link:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/en-us
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
Installation of driver with PXI-8360 error "this device cannot start - Code 10"
While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS
Thank you
Manu
Sounds great Manu,
I also followed on that for you, then you should be getting approval sometimes today.
I hope for the best
-
Original title: teredo tunneling adapter error number 10 on windows 8
on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.
It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop
I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10
Please help me
Thanks in advance
Hi Samuel,.
We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.
Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.
I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.
I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers
A Code 10 error is generated in the Device Manager in one of the following situations:
1. the Device Manager cannot start the device.
2. one of the pilots who needs the unit does not start.
3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.
We could try following common resolutions to solve the problem:
1. update the drivers for this device
2 launch a service of automated troubleshooting
3 contact material supplier technical support
For more information, please see the following article:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
In addition, this article could also be designated:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8
Please answer us on the State of the question to help you further.
-
I have a sony vaio laptop model: model PCG - 71912L: VPCEH32FX
I went on the sony website and downloaded the driver and installed 4 times and still not a not detect.
I did all the updates and no results.
They just replaced my laptop screen and which could have been the cause of the problem, maybe it does not detect the new hardware.
Tried everything I could do so via Device Manager and nothing.
Please help, thanks.Hello
What is the brand and model of the webcam?
Method 1
I suggest you to run the fixit from the following link:Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2
I suggest you to see the following link for the associated 10 error code.Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104 -
When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start
Original title: Code 10
When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start. I have XP. The MP3 came with a 2.0 USB. I don't know what the USB on my computer.
Hello
First of all, thanks a lot for taking the time to help me.
After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.
Thought I would pass it for any future reference.
The SanDisk site said to try this:
Activation or forcing MSC mode on the Sansa player
How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?The steps below will force your readers Sansa Connect mode MSC on your PC.
Sansa Clip Zip
1. turn off the device.
2 hold down the central button while connecting the device to the computer.Thanks again.
-
I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.
Thank you.
Dan
Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver
Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.
-
I have vista I know is an older program and my money the program has worked until a few days ago. Now when I try to do something about it fair to say "this transaction cannot be entered" does anyone know how I can fix it or can it be fixed.
Thank youHi Judith,
For more info on sunset (US version only), see http://support.microsoft.com/kb/2118008.
We do not cover money in this Forum. For the best assistance with money, please visit: http://social.microsoft.com/Forums/en-US/money.
Remember that money is no longer sold or supported anywhere. If you can find one in or for the United States, it'll be a 3rd party source (where you take your chances) and instantly and instantly obsolete version not supported except through the forum above, and possibly some resources, you might find there (but probably not for too long).
I hope this helps. To be perfectly honest, it might be time to think about launching these comfortable slippers of old but falls apart and get a new pair. Indeed, an alternative to money. I don't know of a good free product and do not recommend paid products - but I guess you know at least the competitor quite obvious for years and there may be other choices also. But the decision is yours.
Good luck!
Kosh
-
This device cannot start. (Code 10) with a hard usb pen and readers for windows 7
Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;
Reset
Re-creating image several times.
uninstall all the usb drivers on Device Manager Associates,
update drivers,
using the microsoft error fix program (fails to answer to find bespoke online solutions).
Any help would be useful.
Kind regards.
Hello Scott,
Thanks for posting your query in Microsoft Community.
I understand that you have problems with USB devices in the computer.
I would like to know some more information on this issue to help you better.
(1) that Microsoft fix program error have tried?
(2) remember to make changes to the computer, before this problem?
In the meantime, you can try to follow the following suggestions to solve the problem.
Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Registry backup
http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.
Thank you
-
I get this message whem check the computer Device Manager
Intel(r) management Engine Interface cannot start (code 10)
Thanks Ephraim
Please provide us with your administrative Event Viewer logs by following these steps:
Click on Start Menu
Type eventvwr in the find programs and files (do not hit enter)
Click with the right button on eventvwr.exe and click Run as administrator
Expand custom views
Click the administrative events
Right-click Administrative events
Record all events in custom view as...
Save them to a folder where you will remember which folder and save it as Errors.evtx
Go where you saved Errors.evtx
Make a right click Errors.evtx-> send to compressed (zipped) folder of->
Download .zip here (if you can) to skydrive or a file sharing service -
Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all." I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken. I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol
Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop. The missing module is not Adobe software.
-
When I start the editor of 11 items PS, I get this message: "this program cannot start because MSVCRT10.dll is missing on your computer. Try reinstalling the program to fix this problem. »
When I try to close the error dialog box, the message reappears immediately and the program does not load. After rejecting the dialogue time 8 or 10 or 12, the editor finally support and everything works fine.
How can I solve this frustrating problem? I have already uninstalled and reinstalled the program and who has not solved the problem. If I need to add a .dll file to my machine, where can I find it and where should I put it on my computer?
Thank you
William Driver
Using inferential holmesien and Spadian skills of inquiry, I discovered that the problem lies in a third-party filter application. I determined that since the program gave me the error message when PES 11 has begun its analysis of filter plug-ins, then the problem may lie there. I removed the filter plugins from the program's ' Plugins' directory to another folder and add back one by one until I received the error message. Of course, I have finally found the plugins defective and withdrawn. PES 11 now loads without problem.
Thanks for your help.
-
When I use the search box at top right and start typing a word/words when the menu of possible choices appears and I click one I want, nothing happens. It is not automatically put in the box as he used to and I have to type everything.
You have the extension installed Google toolbar?
If so, try disabling it. -
AutoPlay dialog box does not appear just by connecting the device to the computer
Original title dialog box Auto Play
I want to download pictures from my camera and the AutoPlay dialog box does. I did the same way for many years. What has changed?
Hi MarthaRamsay,
· Did you do changes on the computer before the show?
· You are able to see that the device is windows Explorer?
There are several reasons for this problem. AutoPlay might be restricted by group policy, it could be canceled by a program that is running, or the service that AutoPlay needs to start might not run.
Follow these methods.
Method 1: Follow these steps:
(a) click Start, click principally made programs, on Accessories, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(b) at the command prompt, type net start shellhwdetection, and then press enter.
(c) restart the computer.
Method 2: Follow the steps in the article.
How can I get pictures from my camera to my computer?
Troubleshoot camera connection
For reference: AutoPlay problems
Maybe you are looking for
-
Pavilion 500-081ea: MY FIRST PC HP &; MY LAST!
After buying my first HP PC 18 months ago the motherboard failed & rather than pay a ridiculous price to my PC local store (Curry / PC World) for the expelling, diagnosed & fixed, I decided to have a card mother ASROCK mounted to find the two ports o
-
all my photos have suddenly start appearing Wavec too much contrast and can not be used
I saw a website where the man had some great pics of Thailand then I down; oaded a little of my picures. When I went to look at them were not like the oriignals but were all dark and I couldn't lighten them. That's happened. How can I rstore my [phot
-
How to move photos in windows live photo gallery to another site
I have pictures that I downloaded from my camera windows live photo gallery. How can I move to another site to view?
-
Can't access calendar on desktop
I always had gadgets on my desk. There are a few days the calendar cleared, and I can't turn it back on. Help!
-
Error adding of plugin for project webworks
I'm new to webworks development... When I add plugin in webwroks using the command line projects, showing the following error "webworks' not recognized as builtin or external. Please help me as soon as possible