Computer stops and restarts continually when not in service.
Even when I stopped it for the night, it will restart automatically back up? !!
Hello
Check your settings (BIOS/CMOS) - usually F2 as you start so watch the display - Wake
On Lan, Wake on Modem and so on.
-----------------------------------------------------------
If you catch it the next time he awakens in issue this command:
Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN
at the prompt, type in or copy and paste it
powercfg - lastwake
Press enter
(space between g and -)
-----------------------------------------------------------
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)
Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / off
May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
I'm a newbie with this stuff so bear with me. I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas
Hello1. the updates you downloaded?2 a successful installation of updates?Follow these methods and checkMethod 1: If you are still not able to start the desktop computer, you can rename pending.xml and check.
Renaming or removing the pending.xml file booting from the Windows Vista disc.
a. Insert the installation disc.
b. restart your computer.
c.Press any key to load the disc.Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
d. choose your language settings, and then click Next.
e. in the System Recovery Options menu, click command prompt
f. at a command prompt, type the following command below and press ENTER
CD C:\windows\winsxsg. now, type ren pending.xml pending.old , and then press ENTER.
Restart the computer and check.Method 2: Once you are able to boot to the desktop, follow this method.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
http://support.Microsoft.com/kb/949358Thank you -
Frequently, my computer stops and restarts all am surfing the net. What can I do?
Hello
1. what type of internet connection do you use? What is a wired or wireless?
2. you receive messages or error codes?
2. did you of recent changes on the system?
Step 1:
You can check the following items and check if the problem occurs in safe mode with network.
Start your computer in safe mode
Startup options (including safe mode)
Step 2:
If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
-
Cannot open the computer game stops and restarts
Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue. I hope they don't send you here :-)
-
Upgrade of RAM and windows stops and restarts automatically when it tries to load.
I recently updated my computer running:
Motherborard: ASUS Crosshair V Formula
Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)
RAM: 2 x 4 GB Corsair vengeance 1600 Mhz
I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load. Any suggestions on how to get this extra memory working out to change my Linux operating system?
Thank you
Chris
Hi Chris,
You can try to connect a single stick of RAM at a time and see what happens.
If you are not facing problems, then try to swap the RAM sticks and check for the issue.
-
Original title : OFFICE XP STOPS (MESSAGE of ERROR)
I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE. > WHAT AM I DOING WRONG when="" i="" go="" into="" "setup"="" my="" new="" memory="" does="" not="" show="" up,="" it="" still="" says="" ((((512="" installed="" memory))))="" could="" this="" be="" my="" issue.="" i="" know="" its="" an="" older="" computer="" but="" its="" all="" i="" got="" for=""?>
Hello
You can view these methods:
Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.
Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.
Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.
At the recovery console command line, type:
Chkdsk /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
For more information, see:
-
OSX suddenly stopped and restarted but does not restart. Lines of color on the screen
Hello
I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.
The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.
When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.
Can someone help me find a solution or help me pin point the problem?
From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.
Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.
I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.
If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.
If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.
That first, then write again for additional suggestions if you are still having problems.
-
Stop and restart buttons do not work
There are about 3 weeks and co - either by the way, after installing some Windows updates, I could not long to shut down my computer or activate the restart function by clicking on closing down or restart buttons. The Hibernate button works.
It is not related to firefox.
You have any specific questions with the mozilla products?
-
Original title: what is system problem Partition OS operating system error (C :) file)
get the message when Norton - OS file system error (C :), recommended stop and restart running, did not help)
Hi catherinegood,
1. When did you start to question?
2. you remember to make changes to the computer before this problem? Hope this information is useful.
This is error occurs when Norton scan, then you can check with Norton and check:
Check the link for the support of Norton:
http://securityresponse.Symantec.com/Norton/support/contact/contact.jsp
http://www.Symantec.com/support/index.jsp
If you try to run a scan, you can check out the following link and try to download the Microsoft Safety Scanner and analysis complete on your computer and check.
Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.
Check out the link:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Hope this information is useful.
-
window will stop in less than a minute, stops and restarts everytime I use the computer
message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer
Hello
· This happens randomly, or when you open any application on the system?
· Since when are you facing this problem?
· Remember to make changes to the system?
Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Method 1:
Step 1:
I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.
a. restart the computer and keep tapping F8 until you reach the start menu.
b. Select safe mode and press ENTER.
Step 2:
I suggest you do a clean boot and see if the problem still occurs.
To perform a clean boot follow the steps mentioned in the link given below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 to start the computer in normal startup.
Method 2:
It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.
Automate tasks with Task Scheduler
Schedule a task
http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Problem stopping and restarting the computer
Hello
I searched for so long for a solution, until I decided to post a question here.
Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.
Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.
It's extremely frustrating because I have two options:
Leave my computer running in locked mode (allowing my computer to heat and drain its battery)
or
Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))
Here is my contact information for the computer and all the...
Lenovo G400
(Standard plug)
500 GB WD hard driveWindows 7 ENTERPRISE
If you need more details let me know, so I can help you.
Hope to hear something soon!
MBT
In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wikiIf you have any questions do not hesitate to ask
Please use the restart configuration. This will reboot your computer 3 times then save your work
-
I upgraded my hard drive because I needed more space. At first, I put the same settings as the original drive. C is the primary drive and D is the HP recovery disk. There is apparently a small partition that windows uses, but does not have a drive letter. I left all sizes even. This has left me a large part of the unallocated disk.
With the help of Partition Master, I created a major score that I use for music, photos, documents, etc. At the time I did, I got an external hard drive connected. He was assigned as drive F and I created the new partition as G:.
Shortly after this, my computer crashed and restarted. When I log in, it says that windows has recovered from a serious error. It plugs along for a little while and then did the same thing again and again and again.
It doesn't gives me a lot of other information that means something to me. If I click on the Details button for the information it sends to Microsoft if I want to report that it has a bunch of gibberish, but I'm sure that it wants to say something to someone. I'll try to copy the next time it hangs after as I write this.
I ejected the disk external and changed the drive letter on my new partition to F. I can't believe that's going to do something, but I thought that maybe the partitions on the drive must be in order (of course, I'll try anything).
Any help would be appreciated. Thank you.
Hello
You can follow this link & check if the problem persists.
A "System has recovered from a serious error" message after every restart.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer
The link below has options to solve your problem of loop.
http://support.Microsoft.com/kb/949358>
04:17:0407/17/11
-
After the reinstallation of Windows 7, it does not load and restarts continuously
I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question
Check your BIOS settings. Have you installed the drivers of Sony devices?
Test your hard drive and memory.
First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticSony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5
Sony device drivers: http://eSupport.Sony.com/en/VAIO
Enter your model number or leave Sony scan and detect your model.
If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyFor help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.
J W Stuart: http://www.pagestart.com
-
When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.
Restart mail Windowas
When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.
Try to compact and repair the database (see www.oehelp.com/WMUtil/). There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two. So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).
Steve
Maybe you are looking for
-
Lock screen showing Hello in different languages
I woke up during the night and clicked my iPhone5 on the top button to see the time and the screen is different that usual, he says hello and if I do not drag, he goes to different languages, one after the other. I slipped to the right put my unlock
-
Een website die ik vertrouw wordt niet open, hoe kan ik said oplossen
Webside waar ik tot previous week een zaterdag altijd op speelde wordt nu niet meer geopende, Bij het aankllikken wordt direct internet setting door mozilla/firefox verbtoken, op mijn pc heb ik geen problems anything puts webside andereseplwebside sp
-
Satellite Pro 4600 wireless error AP wep with intel
I have 3 laptops Satalite Pro 4600 with wireless.I have work ok with AP intel. But change company wen encriptación never use WEP wireless network working again. His tent to get an ip but noting. In windows xp with or not sp2, I see the AP. But unable
-
Satellite Pro L500 - cannot install the Realtek LAN driver
Hi all I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop. The installation of the driver software program doesn't seem to work properly all the time, tri
-
kindly tell how to use the unique value of a table with the index 0
kindly tell how to use the unique value of a table with the index 0