Computer stuck in the 3rd phase of transformation of the malware Microsoft Update tool

When Microsoft Update tried to deal with the new version of the malicious software tool. Have downloaded and then installed for stages one and two of the process, and then to step 3 after the restart, he never completed the process and guard re-cycling. None of the tools of recovery works. I tried to put the Windows Vista CD in the drive and it never does on the disc to run the CD, even when I choose, "run from CD".

Are there other methods to stop the update process?

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

See you soon.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not work, try to make a Bootable ERD to do a Startup Repair:

As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

You can make a tool to restart system, System Restore, etc. with it.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista repair disc.

You can do a system restart tool, system, etc it restore.

There is not a disk of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Computer stuck in the loop of update configuration

    original title: after an update of windows the computer configures 3 updates then stops, restarts, and then did exactly the same thing again and again and again.

    Can't get windows log in screen as it sstays in this configuration and stop cycle

    How do I get out of this cycle?

    Hi MargiRobinson,

    1. Did you the latest changes on the computer?
    2. You have security software installed on the computer?

    Refer to the article below and try the steps mentioned, check if it helps.

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

  • Garage band stuck in the App Store update

    I've recently updated GarageBand for iOS on my iPad, properly installed but is now stuck in the tab "pending updates".  This isn't really a problem, even if it's annoying to have the new update notification red point on the App Store icon.

    Anyone had this before?

    Hello

    try to clear the cache of the Apple Store files by typing ten times on the icon star on the background. The Appstore is charging and your problem could be solved.

  • Windows Update is stuck on the screen check updates for more than an hour.

    Original title: Windows Update problems

    I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

    Please leave for 5 or 6 hours and if he doesn't find anything:

    Please run the Windows Update Troubleshooter:
    http://go.Microsoft.com/?linkid=9830262

    Please provide details of any problem it reports as not fixed.

  • My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

    I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

    .. .my computer came pre-installed with vista, so I do not have a disk

    Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

    Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Stuck on "the porgress firmware update"

    My son tried to add a few new songs, but for some reason any that it got stuck on "a refresh database" no matter what we tried, I couldn't get out of this. Then we tried the update of the firmware auto it wouldn't recognize the drive because he was in mtp mode?

    There is no way to change because you cannot access the GUI of the player. We started the sansa with hold/lock on and pushing the rewind button or what ever that is. And then we can connect and firmware has been added. He said to unplug the usb cord so he can take place and we did it he went immediately to the "the progress screen firmware update" I kept check on this subject and he stayed there for hours I let go until the battery ran out. I have rehooked the usb cable to the device to it turned on and it still says the current firmware update and is stuck there. It's the e250 V2 he says only he back that we connected using mac and linux windows. No idea how to solve this problem?

    That's what I did that worked. I turned it maintenance/lock held the central button and inserted the usb cord. Once windows recognizes the device I went to my computer and the root directory entry of the I DELETED MTABLE. SYS once it has been deleted, I turned off immediately and turn it back on. When she came back on the updated database and I could connect normally. I dropped the new firmware in the directory root disconnected the cable and it said the upgrade of firmware and then accepted said and rebboted and he's fine now. Thank you for all your help and suggestions.  One question is what usb mode would work well with windows xp/vista, mac osx and linux (ubuntu)? Because we often move between these systems.

  • Windows Vista is stuck in the loop of update, install update 3 of 3, 0% complete.

    I don't have a Vista CD and I can not function in safe mode because it continues to bring back me to the loop. Please notify.

    Hello

    1. you made any hardware or software changes to the computer?

    2. which update is installed?

    3. have you started the installation of updates?

    You can try the troubleshooting provided in the link steps to solve the problem.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

    Note: If the steps above do not work, you will need to contact your hardware manufacturer.

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    I hope this helps.

  • Nagging "restart the computer to complete the installation of updates".

    Using Windows 7 and had automatic windows updates turned on - I now will choose updates to install.  While I use my computer, the dialog box appears constantly on my screen asking you to restart the computer to complete the installation of the updates.  I restart the computer a couple of times and yet the box is always displayed.  It is obvious that restarting the computer is not the problem.

    George Duran

    Run the Windows Update troubleshooting tool:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  • Error Code937001 with the receiving system update tool

    I have a laptop two months old that is preinstalled with Windows 7.  There is a windows update that keeps do not install the code 937001 error updating 'tools of preparation of the system for Windows 7 64 x based systems (KB947821) April 2010 updates.'

    Whenever I have shut down the computer, the stop button also has a yellow shield next to her, and then when it stops, it moved something.  The update keeps poping up upward to install.

    Any help is appreciated to grreatly.  Thanks Greg

    Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 reset Windows Update by...

    How to reset the Windows Update components?
    -Online skip the section to APPLY to if Win7; KB971058 access via I8 32 bit (only); Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
    http://support.Microsoft.com/kb/971058

    5 restart once again & test.

    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  • Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

    Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

    At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

    Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

    Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

    Thank you!

    Success! 32 FF seems to have solved my problems of performance. Thank you!

  • Cannot install the latest Microsoft updates.

    The error code is 646.  In tracing the history of my update, the problem appeared 15/10/09 when an effort to install "Security update for Microsoft Office Outlook" has failed.  Would appreciate ideas to solve the problem of update installation.

    You can manually install the update or try to solve the problem for future updates.

    See: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/267bbf1c-0390-4034-aab1-45f4a4c4559a/ TaurArian [MVP] 2005-2010 - Update Services

  • Since the last microsoft update does not have e-mail and internet access stopped

    Vista Home premium

    Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
    http://support.Microsoft.com/kb/942818

    If not help to tweak the parameters of your third-party firewall, try the following:

    1. turn off temporarily your antivirus, all modules of Norton (if any), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable any third-party firewall, and THEN select Windows Firewall.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

    2 Uninstall "Cumulative Security Update for Internet Explorer 7 for Vista (KB974455)" via Control Panel | Security | Windows Update | Updates the installed display & reboot.

    3 d - c #1 above.

    4 manually run Windows Update and install important updates available (i.e. KB974455).

    5 reboot > make sure everything in #1 above is activated again and, if necessary, disable the Windows Firewall and enable (or reinstall) your third-party firewall.

    =====================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    GLANCE! -Online if your problem is related to a Cumulative IE security update, call the above number and ask to be transferred to the queue of the consumer IE7 (which is 47830).

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • When I came to update the page, microsoft update error 0x800A0007

    When I go to the page 'page of microsoft update' & click express (recommended), I see the message 'check updates' and the bar, then the error 0x800A0007 comes to the top and the message "the site has has encountered a problem and cannot display the page you are trying to view. What should I do to fix this?

    What is the "0x800a0007 Windows Update error?"

    http://www.tech-FAQ.com/lang/EU/0x800a0007-Windows-Update-error.shtml>

    UTC/GMT is 19:40 on Saturday, June 9, 2012

  • Since the last Microsoft updates, download HP printer no longer works.

    Original title: may not print on hp deskjet F4180 after shot, loading of the latest updates from microsoft.  Download driver hp several times.  Microsoft's response is did not recognize the hp logo.

    Can not print on Hp DESKJET F4180, after shot update microsoft, microsoft message is can varify LOGO.  Printer works when I print from my laptop, but not the destop.

    Hello

    1. What is the exact error message that you receive?
    2 have. the updates you installed?

    You can check the number of the update in the update history:

    1. click on Start, click all programsand then click Windows Update or Microsoft Update.
    2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

    The following article might help: printer in Windows problems

  • TrendMicro indicates the necessary microsoft updates but have already downloaded but still this message.

    I recently downloaded MSO Professional Edition 2003 (I bought used e - Bay). States of TrendMicro "necessary microsoft updates: 9", detailed log indicates MS10-038, MS10-056, MS10-017 on the vulnerability check. I've updated all of the hotfixes from the microsoft Web site, but I still get this problem when I run the trend micro. I have windows xp. Any help would be appreciated.

    Try to update TrendMicro too, I guess that there is error with their database, also make sure that Windows XP SP3 is installed. If question Guard arrives TrendMicro technical support:

    http://eSupport.trendmicro.com/default.aspx

    Also, restart your PC and see if the problem is repeated or not.

Maybe you are looking for

  • Where are the "bookmarks"?

    I bookmark a certain number of bandages, in several different communities, (I think), but I don't know where they are stored. Could someone point me in the right direction?

  • Dynamic event to manage 12 x 12 table or Cluster UI

    I try to treat up to a table of 12 x 12/cluster to allow different LED. The enable method will be two digital controls, JPY, which lights to LEDs in a specific order based on the input of control MxN. The specific order is right to left, bottom to to

  • Analysis of the wave Pulse

    Hi, I'm having a little trouble with this VI that I'm working on and I hope that someone could help me. What I'm trying to do is to detect the two peaks of a wave pulse measurement file. Each pulse cycle has two summits, and I want to get the times o

  • Same WebKit on PlayBook and Torch?

    The PlayBook using the same WebKit rendering engine as the torch (BB OS 6.0)? In other words, the PlayBook browser application relies on Adobe Air WebKit, or is the standalone engine WebKit?  WebWorks applications using WebKit in Air?

  • How many downloads after two computer crashes

    Hi, my computer has crashed twice this year. How many times can I download Lightroom (4) and Photoshop (6)? I could buy another computer for reason of redundancy. Download Lightroom and Photoshop on both?