Computer to TV connection

Similar Questions

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• Computer loses internet connection when I leave the room

  Please can any one help on what the problem with my computer loses its connection to the internet whenever I come out of the bathroom and it does not connect to the gaming sites only for war games all educational .and thing you think it's some technical problem maggot.or piracy which is demanding.  Need your help on this kids brake into tears... help!

  Original title: philip k653

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  a. what operating system use?

  b. is the Internet - wired or wireless?

  c. What is the brand and model number. your computer?

  d. don't you make changes to the computer before this problem?

  We need to know the version of the OS and the type of internet connection to provide targeted assistance. In the meantime, please visit the following links and tell us the results after following the steps proposed in the support links.

  • Why can't I find a wireless network?
  • Set up a wireless router
  • Wireless and wired network problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• How to download and install on another computer without internet connection?

  I have an old computer with windows XP Home Edition. How to download and install on another computer without internet connection?  Files such as DirectX, real player, Media Player.  What I find it just download and install the file must then go to the internet.

  The following site may be worth a visit:

  Microsoft Download Center
  http://www.Microsoft.com/download/en/Search.aspx?p=0&r=10&t=&s=availabledate ~ Descending true... some files are simply web installers, but if you continue
  the research you should be able to find the full downloads. You can
  Talk about the size of the file if you get the full download.

  For Microsoft files... it can help search for developer files
  or redistributable.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Use DirectX Runtimes (June 2010)
  http://www.Microsoft.com/download/en/details.aspx?ID=8109

  RealPlayer
  http://www.filehippo.com/download_realplayer/

  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• I can see the shared folder on the #2 computer but cannot connect.

  I can see the shared folder on computer 2 but unable to connect. It is said "see... administrator permissions. When I go to the computer and creat a hand 1, I can see on the 2nd computer but cannot connect. I can connect to the shared printer on one 1 computer file.

  When # 1 I can connect to #2 and open shared files (just like its supposed to!)

  I have checked the basics, (I can connect to the Printers folder) file sharing.

  Help, please. Both computers have a freash install WIN XP and have been updated to SP3 current peer-to-peer network, firewall is down, Microsoft Security on both

  Hello

  Run on the supercomputer network configuration wizard.  If this doesn't fix the problem:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools > Shell .

  3. type these lines at the command prompt, exactly as shown:

  NET user guest/active: Yes
  NTRights + r SeNetworkLogonRight u comments
  NTRights - r SeDenyNetworkLogonRight u comments

  Kind regards
  Chauvet J.

• Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

  Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

  Hi SelenaMR,

  Are you facing any problem to install updates?

  In Windows XP, it is not possible to update Windows without an internet connection.

  Windows Update uses your internet connection to find updates on the Windows Update Web site or on the Microsoft Update Web site that apply to your computer.

  Reference: Windows Update

  Hope the helps of information.
  Please post back and we do know.

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• My tv is not receiving a signal from my computer when I connect it via cable.

  problems with the computer to the TV.

  my tv is not receiving a signal from my computer when I connect via wires, I unplugged both ends and reconnected without result.

  I see on my computer if she went out a signal?

  Make sure that you connect to the right port.

  http://Windows.Microsoft.com/en-in/Windows-Vista/connect-your-computer-to-a-TV

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.