Computer Toshiba laptop does not work after the lid slam... Help please!

This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

Tags: Windows

Similar Questions

  • On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

    I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

    Hi jillibeans34,

    Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

    I hope this helps!
    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • computer Vista laptop does not stop when the lid is closed

    I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

    Hello banditpunpun2,

    Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

    Please let us know status.

  • Mask does not work with the video. Help, please!

    When I try to use a mask in a video I'm working on, instead of overlay on the image (or the background if reverse value) it only fills in this area with a solid color.  Masks work fine when I use them on a still image (photo), but not with a video. Any help is appreciated! Thank you in advance!

    You create a new shape layer not a mask. Make sure that the lawyer you want to hide is selected in the timeline panel. When you select a tool to ensure that you do not see a controlled line and filling, then draw your mask.

  • Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

    Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

    Follow the info below to try a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.
    You can do a system restart tool, system, etc it restore.
    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    Mick Murphy - Microsoft partner

  • Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

    My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

    -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

    -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

    A support of top-level, software engineer, or someone who takes care of the soap operas could

    -Please provide a number of test series to test with?

    - And/or activate my series?

    - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

    I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

    I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

    Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

    No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

    Thank you!

    Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

    Therefore, it is very necessary that you are using the original installation media.

    Download the CS5 products

    If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.


    WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

    Location: /Library/Application Support / Adobe.

    It is strictly recommended to install Adobe applications using the original installation media.

  • My apple pencil does not work after the 9.3.4 update.

    My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

    < re-titled by host >

    Greetings RechargeableJam,

    Welcome to the communities of Apple Support!

    I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

    First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

    Force a nearby application on your iPhone, iPad or iPod touch

    Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

    Best regards.

  • Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

    Why the Start button / stop the touch pad does not work after the installation of vap?

    May I ask what system and what PPV version do you have installed?

    I assume you mean on the Fn + F9 key combination...
    Is this right?

    Another FN button work as shouldy?

  • Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

    My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

    I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

  • LIP does not work after the installation of a local language, writing in my windows software 8

    LIP does not work after the installation of a local language, writing in my windows software 8

    This icon is hidden... and there is no preview in the installed LIP.
    I hv uninstall the software, but for the LIPS does not work

    Hello

    You use the Microsoft Account or Local user account?

    Create a new user account and check the status of the question in the new user account.

    Create a user account

    http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

    You can also refer to:

    User accounts: frequently asked questions.

    http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

    Thank you.

  • Laptop does not work after you remove the virus win32/winfixer

    Original title: win32/winfixer

    I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

    Hello

    1. what exactly happens when you start on the desktop?

    2. you get any error message?

    3. is your laptop work fine in safe mode?

    4. What are you trying to download?

    5. How are you trying to download?

    6. What is the full error message do you get?

    7. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Method 1: How to fix a computer that does not start.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

    Hope this information is useful.

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • Fingerprint reader does not work after the laptop awakens from his sleep.

    Pavilion DV6-6c15nr

    Windows 7 Home Premium

    Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

    Hello

    Uninstall the software and current driver for the fingerprint reader.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    Download and install the latest version of the software from here.

  • Equium M50-164 does not work after the spill of water

    I bought a laptop Toshiba Equium M50-164 last year.
    I paid a lot of money, now it does not work.
    I can't afford to write that he took so therefore must operate.

    The reason why it does not work is the water spilled on it.

    I took it to a specialist. I found in the repertoire of Thompson, I paid him £50 and he siad he probably one
    new motherboard and so not worth repairing as it comes to Toshiba and their parts are expensive etc...
    Is this fair?

    I'm desperate to fix but don't know how.

    Help, please. Without doubt, I should be able to buy a motherboard for the laptop without costing an arm or a leg.

    Hello

    As you probably know that the laptop parts are not cheap because of miniaturization and mobility.
    The LCD screen and the motherboard are the more expensive parts that are used in the laptop. I na? not know if Toshiba parts are more expensive. I guess it depends on the features of the laptop.

    However, the new motherboard is very expensive and I think that the search for unity of second hand with the motherboard isn't a bad idea.
    CA? s your choice. New motherboard = expensive but with card guarantee or second hand mother = cheaper, but no guarantee

    PS: the replacement of the motherboard is not very easy and that's why if you have no experience you should ask a technician for help.

  • my graphics driver laptop does not work on the 8.1 window when I go from window to window 8.1 8

    When I update the 8 to 8.1 window window my graphics driver laptop does not work.

    I am not able to see vedio and not able to change the brightness of the screen...

    I download and install the graphics driver for window 8.1 from your Web site, but it also does not work...

    When I start the laptop, the error message is showed that no amd graphics driver not located or does not properly.

    my laptop model No. is n003tx in this model 1 GB amd radeon 8670M graphics driver is attached...

    Please help me as soon as possible.

    Hi Kushal

    Sorry to hear, by me, these two things do not seem to be connected. However, we can do many things...

    ----------

    1. If you can, restore the system to the date before the problems. It should solve the problems.

    ----------

    2 uninstalling drivers AMD and Cattalyst driver. Restart the computer and update of HP SAssistent, it is a friend more important your computer.

    ----------

    3. If you had already done so, download and run your computer support page chipset drivers - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5422962#N222

    You need drivers chipset right because it allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    -----------

    4 Please, thry hard reset - procedure

    http://support.HP.com/us-en/document/c01684768

    and that win refresh

    http://support.HP.com/us-en/document/c03538721

    ------------------

    I don't know that he should fix the DIF. Please, let me know, by my side, I wish you good luck and good luck!

Maybe you are looking for

  • Tecra R940-1EE - dead with lead error 4Eh

    Hello. Last night without any warning my laptop has stopped working. I tried with and without battery, press the button turn off for 20-30 seconds without battery, with battery, without the CC adapter, etc.The error code I get on power led (flashes o

  • IdeaCenter K330A is NOT matter of motherboard K330B

    go to this motherboard support a 2nd gen core i7 2600 on the motherboard K330A. Not the K330B. It came originally with a 2100 processor i3. I know that they are the same two socket 1155, but I just need to make sure, he'll support it before buying an

  • HDD dv6 1 305 full, safe mode works

    Hi my laptop is dv6 and OS win7 Off my laptop (the little yellow icon with exclamation point was beside the close option. I thought that it meant that he would install updates, I go over it to see what he did. After I clicked on it I just leave. so I

  • WRT56GS loses the configuration on the power cycle

    V.5.1 QRT56GS with Firmware 1.52.5 After a year of trouble-free operation, the router now constantly loses its configuration after power off.  This means that the router is broken somehow, or is this a known problem? [Work]

  • How to install Ubuntu for PowerEdge 1850 - updated: installed, but does not start?

    I recently got a used PowerEdge 1850 (BIOS A04 version) without OS, with plans to install Ubuntu Server. I read that you can boot from a flash drive USB for it, so I used a tool to make a 8 GB USB 2.0 flash drive bootable for installing the operating