Computer unable to detect the external hard drive after installed update

Similar Questions

• Unable to detect the external hard drive (WD)

  My laptop does not recognize my external hard drive.  I have Western Digital external drive (my passport).  Can you help me please?

  The external hard drive is recognized on another computer? MS - MVP - Elephant Boy computers - don't panic!

• Cannot detect the external hard drive.

  Original title: USB to ATA/ATAPI bridge, cannot access hard drive

  I have a lenovo g570, its brand new, I have because I broke my old laptop but managed to recover my hard drive from my old laptop.

  I bought all the necessary equiptment to open it, I have different devices to connect my hard drive to that allows me to connect to any laptop.
  However everytime that I plug in my new laptop I get the USB to the ata /atapi view of bridge and can't access my hard drive. its really annoying me now. Ive tried all the links and updates that have been previously mentioned on many forums and still nothing works. Ive did go into the Device Manager... still no luck. It indicates that the device is functioning properly. I don't know what to do. some help would be great.

  Hello

  1. What is the brand and model of the external hard drive?

  2. what exactly happens when you access the hard drive?

  3. you receive an error message?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to connect the hard drive to a different USB port or try to connect the hard drive in another computer and check that the problem persists

  Method 2: Try to download and run the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also check if it is detected in disk management.

  a. click Start.
  b. Type diskmgmt.msc in the search box of start and press to enter.

  c. check if the external drive is detected.

  Hope this information is useful.

• My computer does not recognize the external hard drive that my virtual machine is stored (continuous thread solved problem)...

  A new problem arises.  After I crossed the wire attached and mounted my VM on the external hard drive, I can access is no longer my hard drive.  Y at - it a trick to recognize again?

  http://communities.VMware.com/message/1166805#1166805

  Ben, well talk to you again and let me know what external drive you eventually buy and if it was the controller or the drive in the other external drive.

  Woody

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• Photos of deleted the external hard drive after updating Lightroom

  I just installed the new update.  Wish I had read some of the forums before hand.     Of the photos on external hard drive and I wanted to add them to the catalog.  After that I added to an existing catalog, I don't see pictures on the external hard drive.     If I click on the folder on the external drive, there is nothing in the folder.     If I unplug the external drive, I see the question mark by the photos.

  In addition, if I take the external hard drive and plug it into my laptop (Macbook Pro), Lightroom detects photos and does not watch the point mark.  However, I can not see the pictures on the external hard drive.

  Where can I watch, or how to find them.   This seems very odd.

  Thanks for any help.

  Thanks for the reply Akash.

  I did as you asked.

  When to disconnect the drive and click on ""?, "it shows the external drive as the previous location."

  Where to plug the hard drive and search using the finder, that nothing is found.

  When I connect the drive, Lightroom see files and works normally.

  Lightroom sees the files if the external hard drive is connected which leads me to believe that they are still on the drive.    However, they are able to access by Lightroom.  I see nothing in the files on the external hard drive.

  This really baffled me.

  Kind regards

  Birdie

• Cannot access files/folders in external hard drive after installing Windows 7

  Original title: device Seagate Ext Drive

  I have insalloed windows 7 and can, t get disc to open my files of suggestions please. Windows 7 did not installed new

  pilot. icon just no way to access my saved files.

  What about Clyde UK

  Hi Clyde,

  1. do you get an error message/code?

  2. What is the model number of the external drive?

  3. What is the brand and model of the computer?

  In order to diagnose the problem, you can check if Device Manager disk external drive is listed:

  a. type devmgmt.msc in the start menu, run the box, then press enter on the keyboard.

  b. in Device Manager, check if the hard drive is listed in the list of devices.

  Method 1:

  I suggest you to connect the hard drive to a different USB port or connect the external hard drive to another computer and check if the problem persists.

  Method 2:

  Check out the link and follow the steps in the article:

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Unable to connect the external hard drive on the computer of Windows 8

  Hi I have a laptop Windows 8, I don't know too plug I bought last year I recently bought a samsung 3 TB external hard drive I plugged it in and it was recognized tried to transfer files (photos and music) he transferred a little then kept showing error e/s even when I clicked ignore it just kept showing for the next photo , so I unplugged and ive not touched since ive then connected again today to have another shot at it but it does not even appear in the my computer part now ive red somewhere else on this site to go into Device Manager and I can see the mass with a yellow triangle storage device small as he said he could on the subject , I was reading I uninstalled and plugged the hard drive on and when I plug it then settling again, nothing appears when I go back into Device Manager it is there once again with the yellow triangle, thanks in advance if anyone can give me advice.

  Thanks for the reply.

  Have you tried to uninstall and reinstall the USB controller drivers?

  If so, have you installed latest drivers from the motherboard chipset?

  Follow the steps below and check if it works:

  1 download the drivers for external hard drive from the following link and check.

  http://www.Samsung.com/us/support/downloads

  2. click on the link to the HP Web site below to download the latest drivers. Search for drivers related to USB / external peripheral.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5078476

  Click scan now.

  
  3. If you have a third party security/firewall software installed, you need to change settings or disable it temporarily.
   
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software / update, you must reactivate as soon as you are finished. If you are connected to the
  Internet or network so that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  I hope this helps. Back to us for assistance.

• My Windows XP Dell computer does not recognize the external hard drive when it is placed in a port of USP to work.

  I can't get my external hard drive to be recognized by my computer, a Dell PC running Windows XP, SP3. Any suggestions?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Hope this helps,

• change of loan only on the external hard drive after installation of el capitan

  Hi all

  My external hard drive has changed to the loan only after I installed El Capitan. In the read window information, the "locked" icon is gray out only the "shared folder" is available. Any suggestions or solutions?

  Thank you Trudy 113

  Please send a wink to the Panel of the window read share information and permissions.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• Cannot delete files from the external hard drive after copying using Robocopy

  Original title:! VERY DIFFICULT QUESTION! Files that cannot be deleted!

  I did a robocopy and he left during the night and when I came back it was in some kind of loop and my external hard drive was full. The files are not visible in Explorer and if I try to delete them in the command line that fails because some are too long. Urgent I need to redo the space on this external and copy the files to my parents and charity before fly me soon. Please can someone help me.

  * Looks like that I have multiple instances of the same files

  I don't know if you will be able to do this before your flight, but the drive must be partitioned and formatted, reformatted, or scanned for errors of NTFS file allocation table with repairs enabled. Depending on the size of the disk, this could take some time. You can also check statistics of SMARTDRIVE with a utility like Crystal Info disc to see if it is a failure.

  If you do not drive Professional recovery tools available, the native CHKDSK will do in a pinch.

  C:\Windows\System32>chkdsk /?
  Checks a disk and displays a status report.

  [CHKDSK [volume [[path] filename]]] [/ f] [/ v] [/ r] [/ x] [/ I] [/ c] [/ l [: size]] [/ b]

  volume Specifies the drive letter (followed by a colon),
  mount point or volume name.
  filename FAT/FAT32 only: Specifies the files to check for fragmentation.
  /F fixes errors on the disk.
  /V FAT/FAT32: displays the full path and the name of each file
  on the disk.
  On NTFS: Displays the eventual cleanup messages.
  /R Locates bad sectors and recovers readable information
  (implies / f).
  L:size NTFS only: changes the size of the logfile to the specified number
  of kilobytes.  If the size is not specified, displays currently
  size.
  /X force the volume to unmount it first if necessary.
  All open handles to the volume would then be invalid
  (implies / f).
  /I NTFS only: performs a less vigorous check of index entries.
  /C NTFS only: skips, checking of cycles within the folder
  structure.
  /B NTFS only: Re-evaluates bad clusters on the volume
  (implies / r)

  The /I or /C switch reduces the amount of time required to run Chkdsk by
  skip certain checks of the volume.

  Any routine review and car repair will take time. CHKDSK is no exception.

• HP Envy h8 - 1400z: lack the 2nd hard drive after windows update

  Discount Windows 8 for us solve a problem.  Before the update, I had two drives of 1 TB.  The first hard drive was for the OS C: and D: for the recovery partition.  The second disc has a partition called E: and has been used for data.

  After the update, I still have my partitions C: and D: as before on my first hard drive.   However, no D:.  Using disk management, the first hard disk is visible and it has C: and D:, as well as a few other partitions I do not recognize but appear to be associated with the update. Disk management does not show the second hard drive.

  Starting in UEFI shows the 2nd disc and it is recognized as a 1 TB drive and I have no reason to believe that the drive has failed.

  Did some research and see that others have lost a partition during the refresh, but the road is still visible in disk management.   Their problem is resolved by assigning a drive letter.  However, this does not work for me because the operating system does not see the drive.

  Is it possible that refresh changed my disks in raid 1?  How I check that?  Other thoughts on how I can get my drive back?

  Thanks for any help!

  Hi there @AVperson
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that after a cooling a HDD is no longer appears in disk management. I'm happy to help you.

  Since it does not appear in the BIOS but not in the operating system, let me start with a few BIOS tests on two hard drives. In fact, I suggest doing all the tests of material.

  I see no reason for a system spontaneously create a RAID where there were none before. If the system was a RAID on the second drive would be a mirror of the first, and it must always appear in disk management.

  After testing the system, you can always try remove the second disc and test it using a disk external drive bay on another device and see if it is readable.

  Let me know what you find.

• Unable to detect the external HARD disk

  I have a Buffalo external HDD 3.0 Ministation 500 GB which worked great for a month, but now when I plug it into my laptop it does not appear in my computer. It does appear in disk management and remove material without a drive letter.

  I looked for a solution and tried to rename it in disk management, but the option letter and paths of change disc is not available. Please let know us if there is another solution. I use Vista Home premium on a computer Asus F80. I have important data in there so reformatting now is not an option.

  Plug the other ports does not work. Always undetectable.

  Reset does not work

  Update the hard disk driver does not work. He said that the drivers are up to date.

  Plug it into another machine has the same undetectable result.

  Hello

  I would like to ask you to the manufacturer of the device to contact for help that you were facing the same issue when you talk the device to another computer.

• Cannot reconnect the external hard drive

  Cannot reconnect the external hard drive after moving the computer. I have a WD external hard drive and after moving computer cant use. It is used to mount drive f and now in the g drive. He keeps asking me to format the disk before it can be used, but cannot do so. I am desperate to back up my files but can; "t.Any help would be much appreciated

  Hello meatindustries,

  What operating system do we use?

  The answer to this question, we can pursue various troubleshooting methods.

  There are many third-party data recovery utilities available for free online.  You can search for these using your favorite search engine to find one that you like.

  Let us know the operating system you are using and we can go forward from there.

  Best regards

  Matthew_Ha

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.