Computer unable to detect USB devices. Problem with the PnP device

Hey,.

When I use any usb device in my computer it didn't show. When I troubleshoting the messege see the problam pnp device. kindly advice me how to solve this problam in my system.

Thank you.

Original title: pnp device problam

Hello Usman,

Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If Yes, you did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, 'messege see device pnp problam?

I understand that you can not use your USB devices because your system does not detect them. To resolve this problem, I would suggest trying the following methods and check if the number is reproduced.

Method 1: Try running the Fixit tool from the link below.

Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/GP/hardware_device_problems

Also, run the next fixit to solve common problems with USB devices.

Diagnose and automatically fix the Windows USB problems

http://support.Microsoft.com/mats/Windows_USB_diagnostics

Method 2:

Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

Tags: Windows

Similar Questions

  • Problem with the PnP device

    Problem when I connect to my camera Canon SD870IS.  Has started to occur after Windows has been reinstalled, using the disc had been slipstreamed with SP1.  Convenience store (Start-> devices) and printers-> right click and select Troubleshot reports there is a problem with the PnP device and suggest to reinstall the driver. Reinstall driver fixed the problem, but he returns as soon as the computer is restarted.  How can I permanently solve the problem?  Environment:
    Dell Inspiron 530
    2 GB memory
    latest drivers for system devices (drivers have been updated since the problem began, that does not solve the problem)
    latest drivers for the camera
    Windows 7 Ultimate 32 bit

    I carefully reread the manual of the camera, which proposed the transfer of the camera rather than the computer.  After doing this once, the problem has been resolved.  Apparently, initiating the camera change some settings on the computer.  It shows now no error when the camera is connected, and the file transfer Wizard starts automatically.

    Problem can be closed.

  • my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

    computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

    To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
    Help would be much appreciated?

    Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

    Thanks for the effort though...
  • USB keys - problem with the Recovery Manager

    I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

    Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

    Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

    Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

    The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

    I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

    I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

  • There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

    I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

    There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.
    The device information
    Name: Microsoft Teredo Tunneling adapter
    ID: ROOT\ * TEREDO\0000
    Error code: 10
    Reinstall the device driver
    Completed
    There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.
    Problem with the PnP devices
    Detected
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

    Original title: printer problem

    "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

    Hello
     
    1. What is the brand of your printer?
    2. when the question is is produced?
    3. you remember to make changes to your computer before the problem?
    4. when exactly you get this error?
     
    I would temporarily disable all security software and check if the problem persists.
     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    If you have an HP printer, you can consult the links below.
     
     

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • HP d530 with XP SP3 unable to detect USB

    Original title: USB problem

    I have a HP d530 with XP SP3. I also have a Nook from Barnes & Noble. My PC had a number of problems recognizing the Nook. Now, he won't acknowledge it at all. I tried a number of things, including a reboot of the system, and a total output down to nothing will do. In my computer, it shows a 'G' drive, but he does not show it as a corner. In addition, it is not at all in Adobe Digital Editions, which, of course, should be. I tried the meals in another computer and it is well known. I also plugged in a usb broom handle in the port, I try the Nook in on my d530 and joy take shows very well. If you have any suggestions I'd be happy to hear

    Thanks in advance, Terry

    Hi TerenceSeery,

    Thanks for posting in the Microsoft Community.

    Before you start the troubleshooting steps, I need the information required.

    1 did you changes to the computer?

    2. have you checked with the other USB port?

    3. did you receive an error message?

    Method 1:

    I suggest you run the fix it tool and check.

    Hardware devices do not work or are not detected in Windows FIX IT:

    http://support.Microsoft.com/mats/hardware_device_problems

    Method 2:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    See also:

    My drive does not appear in Windows Explorer

    http://support.Microsoft.com/kb/330140

    Method 3:

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

    Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

  • Re: Satellite C650 - problem with the devices connected to USB ports

    Hello

    Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

    The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

    The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
    Thanks in advance

    Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

    Post edited by: leahhw123

    Hello

    What happens with plug n play like USB mouse device?
    You are able to use an external USB mouse correctly?

    > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
    I guess this could be a problem with the software or drivers installed.

    I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

    In addition, you can try to install this software once more, check whether this USB problem appears again.

  • Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

    Original title: speaker FOR desktop

    In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

    "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

    How to solve this problem.

    Hello

    I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

    I would like to know some information:

    1. Have you tried to plug any other speakers or headphones?

    2. You did changes to the hardware/software before this problem?

    3. Have you tried using these speakers with another PC?

    Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

    Hope this information helps.

    Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

    Please get back to us with an update on the issue, we will be happy to help you.

  • Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

    I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

    Has a USB video device driver problem
    Not fixed
    There is a problem with the driver for USB video device. The driver must be reinstalled.
    The device information
    Name: USB video device
    ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000
    Error code: 10

    Hey laloo.16,

    As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
    To access Device Manager:
    1. go to start and type Device Manager.
    2. Select Device Manager in the control panel list.
    3. go to your device.
    4. to remove:
    Right-click on it and select Properties.
    5. Select the driver tab and click on uninstall to uninstall the existing driver.
    6. close Device Manager.
    Now go to the link below. Download the Dell WebCam software for your product.

    http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

    Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • audio device / I have a problem with the audio device from my computer

    No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of

    I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!
    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

    Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

    Separated from -.

    https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

    Hello

    Thanks for posting your query in Microsoft Community.

    This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

    If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

    Support from Asus: http://www.support.asus.com/

    Please do not hesitate to visit our Web site for any help with the Windows operating system.

  • HP Support Assistant unable to fix a problem with the CD/DVD not detected

    I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

    Hello

    If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

    In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

    http://support.Microsoft.com/kb/982116

    If find you the following registry keys and delete them, restart the laptop before checking the disc.

    Kind regards
     
    DP - K

  • Problem with the touchpad doesn't work is not on the computer.

    Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

    Help would be GREATLY appreciated.

    (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

    Hi Lucie,.

    Thanks for posting your query in Microsoft Community Forum.

    What is brand and model your computer?

    Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Try to run the suite of equipment fixit and see if the problem still occurs.

    Hardware devices do not work or are not detected in Windows

    Method 2:

    See the additional steps provided in the following article.

    Mouse, touchpad and keyboard with Windows problems

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Computer HP laptop, computer cannot establish communication in both directions with the device (printer)

    HP laptop, Windows 7-64 bit, no changes to the system before the problem occurred.

    Printer: HP Photosmart Plus B210a all-in-one series.

    When I click on my ink for my printer in my computer, it goes to 63% and stops. Then, he said. The computer is unable to establish communication two-way with the device. All systems are running, and there is no reason that I have a problem.

    I can print, Fax and Scan, I get blank printer paper, printer is not stuck, nothing in the queue to prevent it from printing. It will not just show my ink from my computer.

    Just try to uninstall the printer from Control Panel drivers and reinstall again.

Maybe you are looking for

  • Citizens a website

    Everyone met the problem I did trying to register online with this company?  I was unable to do so and when I contacted the company's support, I was told that they had problems with the registration of mac users, and I had to manage my account on the

  • Does not load disc

    When I insert a disc, label to me, I hear it go, but it does not appear on my desktop or the finder. Halp!

  • the iPad steead

    How to access my photo stream on icloud for my iPad

  • Threshold Wizard vision color

    I've just updated Vision from 2014 to 2016 to discover that, in the Vision Assistant, the color of the line has changed from red to blue. Is there a way that it can be customized to the Red that I prefer by far for this function?

  • Why my shortcuts Office does not?

    How is it that all of a sudden my desktop shortcuts will not respond but by placing the list of Office I can get an answer to that. ?