Computer video buffers plays more than using 4 G from T - Mobile

Similar Questions

• Satellite L505-10J - cannot play more than 30-60 min

  Hello

  I just bought the Toshiba L505-10 days last week and I'm really satisfied with my choice, but when I run a game like Counter Strike Source or Risen I have some strange problems. The first 30 to 60 Minutes are Ok, but then the sound starts cracking and my mouse stops (Razer Lachesis) shifts when I hold a key on the keyboard (for example, W to go forward). When I go to my office while playing this problem disappeared (I opened Notepad down W and moved the mouse. No problem at all). When I switch back is there once again. The only solution to this problem is to restart my computer. Then I can play the next 30-60 minutes before it starts all over.

  I have already reinstalled Windows 7, but the problem is still there.
  When I use my Touchpad instead of my mouse is the same thing. Cannot play more than 30-60 min...

  This is not acceptable, because I want to play games on my cell phone at any time.

  Hope someone can help me and sorry for my bad English, I'm from the Germany.

  Hello

  As I understand it, this problem occurs only playing games.
  There is no problem to use the laptop with another application.
  Is this good?

  Hmm how about graphic card driver update and BIOS update?
  If more recent versions are available then it would be desirable to update!

  Check it!

• Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply a different video transition effect to each photo. It might even be random effects. I see that I can apply a unique to all p transition effect

  Hello, I want to build several video clips with more than 500 images (pictures) of each clip. I need to apply different transitions video effects by alternating each photo. It could be random effects. I see that I can apply a unique pictures transition effect at the same time, but how to apply different transitions not one by one? I could do a clip applying different transitions manually as I wish between hundreds of photos, but I would like to be able to repeat all the transitions of a new video by changing only the photos. Is this possible? Or a tool to apply random transition effects between photos? Or a way to automate the actions to apply different transitions similar to what we can do in Photoshop? Thank you!

  But how to apply different transitions not one by one?

  You can not.

  If you wish to make a slideshow with all the transitions better fantasies use something like Pro Show gold.

  Alt drag window project replaces clip/still on the timeline.

• My CPU usage is at 100%, but the task manager says that nothing is more than using 01%

  Last night, I installed the updates for Windows 7 during the stop, as I normally do. He said there are four updates, and one went by pretty quickly. It seemed to get stuck on the second (even though he probably didn't want to - the blue ORB turned and the dots are moving, so I guess it's to large or slow) for a few minutes, three update took slightly less time and at the time he obtained for the release of four, I was paying attention just because I was so tired.

  In any case, I went to start my laptop (Toshiba Satellite) and on black splash screen "starting windows" with the flag/banner, he said that he needed install/configure 360 some odd updates. I had seen this before, although I do not remember how recently, so I thought nothing of it. I still don't know if it meant something significant.

  Now the problem is that my CPU usage is constantly at 100%, yet when I finally managed to open the Task Manager, NONE of the listed processes use anything more than 1%, and those who fluctuate. I can easily boot into safe mode, and from there, I have disabled the start of the process, such as taskbar support and itunes things google related, but I still boot normally to 100%.

  Any ideas? It would be GREATLY appreciated. I'm going to College next year and I really don't want to worry about finding how to get a new machine.

  Thank you!

  Hi Renae92,

  1. You have security software installed on the computer?
  2. High CPU usage occurs after the boot process?

  Method 1

  As the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then I suggest you run the troubleshooter of performance and check if it helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Computer will work no more than 3-4 seconds after start-up, then stops. New CPU installed

  I replaced a damaged AMD Phenom II quad CPU 820 HP said was a compatible AMD Phenom II 965 Black edition on my HP Pavilion p6320y quad. AMD has recommended I also replace the PSU with a 500w power supply 300w. This has been done with success as well. When I turn on the machine, the cooling fans turn on, but run for not more than 3-4 seconds and the machine turns off. The CPU is brand new and it has been determined to be good, not to have been a DOA. Does anyone have any suggestions?

  Here are the specifications of your desktop HP Pavilion p6320y and its card mother M2N78-(Violet6). Previously, these support pages stated that the motherboard has a maximum TDP of 95 watts. According to the specs, it supports the following processors;

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  AMD Athlon II X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  The AMD Phenom II X 4 965 processors are valued at 125 watts and 140 watts and the motherboard exceeds 95 watts maximum. In addition, BE or "Black Edition" processors are not listed as supported based on specifications.

  Please send Bravo

• Can wave warp in PE9 effect play more than once?

  I use PE9 and I want to apply the wave effect string text when the text from right to left. The problem is the effect of wave is stopped before the text arrives at the destination. So I wonder if there is a way to extend the ripple effect I want?

  Here are my settings:

  

  Thank you very much!

  RGB2CMYK2

  Here are the details of what I do on these last two videos YouTube that represents how I interpreted your additional explanation of the task you are looking for.

  Video data of 30 seconds on Video 1 and the goal of the title with text to wave for 6 seconds and always the version of the title for the 24 seconds remaining.

  First elements 9.0/9.0.1/Windows 7 64-bit

  Standard NTSC DV project

  Create your title in the Titler "Nomad welding Table The versatile ' so that it extends from the left of the on the left side of the frame.

  Stretch the title on the timeline so that its duration matches the video on video 1 (i.e., 30 seconds).

  Highlight the expanded file title and go to its properties Palette/Motion Panel and position the property with her Y and Y values (as I mentioned in a previous post) (high and low) X value remains fixed while we did vary the value of Y (from left to right or from right to left).

  We need to determine in advance... Position readings

  a. Y when the last of the text stops just at the right edge (in my case = 1080)

  b. Y when the text goes from right to left and its beginning just touches the left edge. (in my case = 358).

  Then move the timeline indicator until the time indicator shows 00; 00; 06 00. Make sure the file title is highlighted, and then use the Clip from Split to cut the file of security at this time.

  Then for keyframes for the Position properties for the segment of 6 seconds.

  After that begin the creation of keyframes in the Motion Panel expanded, enter 1080 for Y. assured that X is always 240

  Press Page Down and press the arrow to the left once to reach the end of the segment 6 seconds. Now enter 358 for Y. assured that X always is 240.

  Restore the timeline content.

  With file highlighted title apply progressive wave to the file title via edit header/effects/Video Effects / distortion / wave.

  Restore the timeline content.

  Highlight the part still of title (24 seconds) of the content of the timeline and make sure that the value Y = X = 240 and 358.

  At this point, everything seems to me from the progressive wave to text no wave. I think that a video transition does not improve. But what you might try is a deceleration for the second keyframe in the second segment 6. For this,.

  Select file title

  The Properties palette

  Motion extended Panel

  Click the show keyframes icon in the upper-right corner of the Properties Palette to get a cut of the Motion extended zone Group 2 view.

  Look at the limit of the Position property. You should see 2 keyframes there (right). The first key frame is easy to see while the other is located on the right edge of the line. Right-click on what you can see from this second keyframe, select Tempral Interpolation, then progressive and degressive. I don't think it makes a big difference, but see what you think.

  I repeated this process several times to test road it. And I have read the above several times the evidence. But check at each stage. Please let me know if you see something that looks like typo or something you need for clarification on.

  In my previous posts, please see two YouTube videos sample products with the above.

  Thank you.

  RTA

• Why can't play more than 90% of video clips (YouTube, etc) that people send me, though even I have the last reader flash from adobe etc.

  Usually what happens is I click the link, and generally the vid will begin charging. Sometimes it will even start to play. But then it stops and nothing more. I was getting messages that I needed a new edition of Adobe Flash Player, but which is not the case since I've upgraded to the latest version of Firefox (27?). This happens not only with video links that send others. I often look at stuff myself; and more often than otherwise will not play video. I tried to uninstall and reinstall (not Adobe) different flashplayers, but nothing helped.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I get a sound to play more than once using the Commons of edges?

  Hi, I'm very new to all of this; If Mylène so ask dumb stuff...

  I used successfully the communes of edge to get an audio effect to play on a timeline, but it will play only once. Anyone know how I can get it to play again at various times of relaxation?

  The code I use in creationComplete is:

  yepnope({
            load: "http://simonwidjaja.github.com/EdgeCommons/live/EdgeCommons-0.7.1.js",
            callback: function() {
  
  
  
  
                      // Load sound manifest (e.g. in creationComplete)
                      var assetsPath = "media/";
                      EC.Sound.setup(
                          [
                                {src: assetsPath + "bubbles.mp3|" + assetsPath + "bubbles.ogg", id: "bubbles"},
                          ],
                          function(){ EC.info("Sound setup finished", "DEMO"); }
                      );
  
  
  
  
                }
  });
  
  

  I then in a trigger on the timeline:

  EC.Sound.play("bubbles");
  

  As said, plays the foregoing, once... but if I place another, 'EC. Sound.Play ("Bubbles");' trigger further along the scenario, nothing happens. Similarly, if audio has already played and the lines of the timeline, the audio will not play a second time. I think I have to write in certain kinds of "unload" kind of thing, so he can play again when it hits the new trigger? Or I could just talk to Cobblers? Who knows? I certainly don't have which is why I desperately need help... Please x

  Have you tried to put the code to specific locations in the timeline?

  Here's a samlpe:

  https://www.box.com/s/3cf7sh7mtwzpvfqmynt1

• can you video chat with more than one friend at a time in the new Hello?

  Just wondering if a group of people can video chat all at the same time, or just individual?

  Currently, it is only possible to connect peer-to-peer with another computer.
  To connect multiple computers, you would have to connect via a dedicated server and is currently not possible with WebRTC.

• How to format USB 3.0 player to play more than 4 GB on TV media

  Hello

  I'm looking for a way to format a USB drive to play media on my television. This problem seems to occur when the upgrade to El Capitan. I could always format the USB to play large files of 5 to 15 GB and easily play through my smart TVs. I am able to always format the drive to the exFAT to enable the large file size, but my TV does not recognize the drive and therefore can't play.

  Is anyone else having this problem or knows how to solve this problem? Thank you

  What format your TV so not recognize ExFat? If the TV accepts the format ExFat, you can try formatting the drive ExFat using a Windows PC to see if it works.

• Symbol of the play more than once

  I have 1 'master' and within an animation symbol

  This symbol is 2 times on the timeline, hidden at the beginning of the timeline

  There are 2 buttons on the stage with 2 actions

  first button

  SYM.$("mySymbol1"). Show();

  SYM.$("mySymbol1"). Play (0);

  second button

  SYM.$("mySymbol2"). Show();

  SYM.$("mySymbol2"). Play (0);

  and inside the 'master' symbol, a button with 2 actions

  sym.getComposition () .getStage ().$("mySymbol1").hide ();

  sym.getComposition () .getStage ().$("mySymbol2").hide ();

  The animation plays well at the first click, but not after a second clik on the same button or other button

  use getSymbol('name') to read a symbol:

  SYMgetSymbol("mySymbol1") .play (0);

  SYMgetSymbol("mySymbol2") .play (0);

• How can I send a video Message to more than one person?

  HOW CAN I RECORD A VIDEO MESSAGE, I DID IT, I CAN SEND THE SAME AS OTHER PEOPLE?

  Right-click on the preview image of the message, and then select record under.

• I had to wipe my computer and didn't back up the files, how can reinstall my illustrator from adobe on my computer? I paid more than $500 for this software and has lost much of little boxes in my move from California to Texas. I can't find my n ° of serie

  I need help reinstalling adobe illustrator on my iMac, I had to clear all yesterday and I can not find the serial number or old packaging purchase. I bought at Best Buy in California, but I moved to Texas since then. How can I do this?

  Hello

  I sent you a PM, please answer and a link to download illustrator than CS6 is

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  Kind regards

  Gary singh

• OfficeJet pro more than 8600 wake up from sleep problem

  My officejet Pro Plus 8600 not wake when looks like it went into mode 'sleep' (power LED flashes slowly). I'm unable to print, use the touch screen or off without unplugging it to reset. Then, he repeats the cycle. I use Windows 7 and network through a Verizon MiFi.

  I've deleted and reinstalled my printer and driver/software using the CD that came with it and I think that the "unable to wake" problem has been resolved. Hope it helps someone else.

• Video plays faster than recorded

  I used my iPhone 6 s to record (720 30 fps) video of a DJ live set so I used Traktor to record audio. When I put the two together in iMovie, audio has come gradually out of sync with video (video played faster).

  I took off the audio from the video and it has exported to an audio file, I then put the two audio files (the video) and that of Traktor on Mixmeister to analyze the BPM. The result was 124.2 BPM for video and 124.1 BPM for the audio file. 124.1 was correct because it was the BPM with whom I recorded the game.

  Can someone tell me what could be causing this and how to fix the speed of the video?

  I found the problem. After contacting the Apple support, they informed me that the standard camera app has a dynamic frame rate. So when we set for example 720 30 fps, we actually only limit the frequency of maximum images at 30 and not fixing it to the 30. That's why when its import in iMovie some of the images are missing, which causes the video to play sooner than expected. The only solution is to feed the audio directly on the iPhone with an external microphone adapter.