computer Vista laptop does not stop when the lid is closed

Similar Questions

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• Firefox.exe * 32 process does not stop when the program is closed in version 17.0.1, on windows 7 64 bit OS.

  Trying to open the Firefox browser, I get a message that Firefox is already running... You can stop the process or restart the computer. This is a recent problem and I can't think of any changes that may have occurred to change the operation of the two programs.

  The support on Firefox "suspended" article has a few pointer on Firefox is not completely close and clean up after itself. Help anything here:

  https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

• Photoshop CC process does not stop when the application is closed.

  After I closed CC in Photoshop, the process runs, draining about 6 GB of RAM.  Is there another solution to that ending the process manually?

  Thank you for the information, I suggest you to please update to the latest version 2015.1.2

  Also please go to the Task Manager, then go to the process tab, right-click on Photoshop.exe and click on set the priority.

  And select high, restart the computer once.

  Restart Photoshop and see if the problem persists or not.

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Microsoft Arc Mouse will stop when the lid is closed

  I have a samsung R505 running vista. Now, I chose to connect it to my TV with an HDMI cable. I would like to place the laptop in a cabinet under the TV and use my keyboard and mouse wireless Arc MS, but when I close the lid of the portable computer, the mouse freezes and jumps from one point to the other when he moves. This happens when the cover is open.

  I have configured windows not to sleep when the lid is closed and I checked and my mouse drivers are up to date.

  Any help on this would be appreciated. Please let me know if you would like more information on my put upward.

  Thank you
  Chris

  Hi Chris,

  You can uninstall the mouse and try to download the latest version of the software and the mouse drivers and check.

  You can read the following article and try Method 1 to uninstall the software.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  You may rfer to following article to download the latest version of the software and drivers.

  ARC mouse Software and Driver Downloads

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• computer Vista laptop does not accept password

  I have been using my HP vista laptop and today, it does not accept my password. I tried safe mode and tried to change password. NO RESULTS...

  Help, please...

  James

  Dunedin FL

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.

• Yoga 260 do not SLEEP when the lid is closed

  Hello

  Sometimes when I close the lid off my Yoga 260 Windows 10 do not go to sleep.

  The behavior is really weird because the red light on the cover flashes like when it is in "standby", but I can hear the rotating fan.

  When I open the cover, it's even more bizarre. Windows are not locked and I am not asking for a password. The whole system is very laggy. The mouse moves in jumps, and there is not any response to keyboard or touchscreen. After a few seconds/minutes, the system is suddenly OK as nothing happened.

  Is not happening all the time and I wasn't able to see any model, when this happens.

  What should I do to get rid of this?

  Thx for the help.

  I tried to disable the special function of Lenovo for rapid reactivation in 15 seconds after closing the lid and it seems to be OK now.

• Computer Vista laptop does not detect my speakers!

  When I turned on the laptop today, there is no sound coming from the speakers when I tried to listen to music. The speakers worked yesterday. When I right click on the sound icon in the menu of shortcuts in the lower corner on the right and click Open volume mixer, I can't find the speaker tab reading device (I made sure that both "show disabled devices" and "show disconnected devices" options are checked). The only device listed under the playback tab is "Peripheral digital output (HDMI)". When I turn on the music, the bars on the right side of this unit turn to the Greens according to the sound, but there is still no sound coming from the speakers. There is also no sound in headphones when I plug them in. When I go to Device Manager, disable "high definition audio device" under "Audio, video and game controllers" and reset the laptop, the "digital output device (HDMI)" disappears and no devices are listed on the playback tab in the volume mixer. When I activate the "device high definition audio ' back, the digital output device (HDMI) appears again. So I'm assuming that the computer recognizes speakers as HDMI device even if there is no plug HDMI connected to the laptop.

  This troubleshooting help will be appreciated. Thank you.

  Hello
  
  1. What is the brand and the model number of this laptop?
  2. use the built-in Laptop speakers or you attach external speakers?
  3. did you of recent changes to the computer?
   
  Check if your headset is set to use as the default value * Communication * device instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.
   
  Method 1.
  Check volume settings.
  a. right click on the speaker icon in the taskbar, then select volume control options.
  b. put a check mark on "all devices evolving sound.
  c. make sure you have "Default uncontrolled communication device".
  d. place a check on the speakers and headphones.
  
  Method 2.
  I recommend you update drivers sound card from the manufacturer's website and check also if there is windows update available.
  See the articles below for more information.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Let us know what happens when you play.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro U300 does not hibernate if the lid is closed

  Hello

  I just got a brand new Toshiba U300 series laptop with Windows XP (toshiba OEM) own installation.

  After that I turned on laptop display don't stop working. It was configured to Hibernate computer. I assumed, it must stop completely, but it is not. Processor cooler is still ongoing.
  Another problem is that this computer is unable to execute with press of a button, including the Start button / stop.

  Someone at - it same problem. Is it possible that is based of the material.

  PS Phone is 2 days old and not even much used jet :)

  Hello

  Have you tested immediately after purchase, or later after installing some software you need? For me it seems that an application cannot be stopped and cell phone cannot be switched into hibernation mode.

  I will not be speculating here but I don't think it can be material nuisance.

• MacBook Pro stops when the lid closes, loses the open tabs and background image...

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer cuts automatically to the bottom when the lid is closed, losing all Web pages, and for some reason, some background, I've saved. (My browser is Mozilla Firefox and it prompts you to restore me the tabs lost, which he will).

  The led standby does not blink or light up when the computer is turned on, it will turn on only at startup. At startup, the login page is displayed, and after that I entered my password it takes about 15 to 25 seconds to load and open my account. What is going on?!

  Summary:

  Stop when the lid is closed,

  Loses the background image & open Web pages.

  Standby blinks only when starting,

  Time of loading extended after logging into my account.

  Any help would be greatly appreciated! Thanks a lot for reading.

  uhlexia wrote:

  Hi all

  I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer turns off automatically when the lid is closed.

  Take it back to the repair as well as your receipt of repair shop.  Apple has a 90 day warranty on all repairs.

  

• New Yoga 14 stops when the lid closes

  I just got a new series of Yoga 14. Sometimes, but not always, the laptop stops when I close the lid, even when it is plugged. I already looked at the option to 'choose what happens when the lid is closed' and it is set to sleep, no downtime.

  Any ideas on how to solve this problem.

  Hi Nickajeglin,

  Welcome to the Forums

  According to the request, we understand that you are facing problem with the system stops when the lid is closed in your Lenovo 14 yoga.

  As you mentioned that you have changed the setting to sleep, try changing to do nothing option and check also the question, if still the issue persists then uninstall and reinstall the power management and check the issue.

  Click here to for 10 windows power management.

  Let us know the result.

  Best regards

  Ashwin.S