Computer Vista no longer grateful camera.

Similar Questions

• LaserJet P1102W: Computer is no longer grateful printer

  My computer won't recognize is no longer my printer.   The printer is connected by USB.   I've tried change the USb port and you use to a diffferent cable.

  Hey there!

  Finally, blue light should stop blinking as this light means the printer is trying to connect to a network. You can try a reset (see below).

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Afterwards, you should be able to connect, follow the steps in the guide I posted earlier and also try suggestions "other steps to try" .

  If you are still unable to connect, contact HP directly to discuss a replacement printer. I'll leave their details below.

  Good luck

  Click on the "Accept as Solution" If the issue reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• Computer does not recognize my camera SD card

  We installed a wireless router and now the computer does not recognize my camera SD card. I have

  no idea how to solve this problem.

  Detail please...

  I can only imagine you saying the Autorun window not
  longer starts when you connect the camera via a USB cable. ?

  Maybe the auto run settings need to be adjusted:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  If you have external or internal drive do you have
  the same question when you insert the SD card?

• My computer Vista no bed no DVD or my CD Sims 3 How can I fix.

  Initially, the computer finds my Sims 3 Cd and allowed the installation but then I had to get out so I put the computer vista on sleep when I came back the computer wouldn't wake up I did an auto-stop (i juice that held the power button to turn off) when I rebooted the computer's DVD, and sims 3 were not dectected the saying are computer 'E '. ': / APPLICATION WAS NOT FOUND. I did a disk clean up and installed the new software which does not solve the problem, how can I get the DVD RW drive works again

  I would be very grateful for your suggestions.

  Muti man,
  Thank you for visiting the Microsoft Answers community forum.

  Here are several different fixes for this type of problem because it can be caused by different things.  If none of these fixes work, try uninstalling the drive completely, including the drivers and any third party software you have, then restart and reinstall everything burning.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060 (filters)

  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Let us know if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• My computer is no longer able to connect to the internet. I can download updates of Windows and Adobe but not surf the net in the browser.

  original title: internet connectivity

  My computer is no longer able to connect to the ' net.  This ab took place two months ago.  I still get updates from MS and Adobe, but will not connect to any Web site.  I've tried wired and wireless.  All my other computers are connected again and the router and the modem seems to work properly.  This occurred after a windows update has been installed automatically while I was away and there was no restore points.  Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.

  Hello

  You can follow below link that can help you to solve your problem:

  Reset Internet Explorer settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

• Recently replaced hard drive. CD and DVD burned on vista cannot read images, but play videos on an another computer (XP). They are readable on computer vista created the. Closed manually as well.

  EMachines replaced my hard drive. I normally share files between computers with CDs and DVDs. returning from a trip, I downloaded photos and videos of my Sony camera to computer vista with Solution Explorer, as usual. I burned the pictures and videos on CD and I tried to transfer them to my Toshiba laptop, XP. The trasfered from videos, but the image file was empty. I have repeated twice, thus closing manually. Thew CD shows as complete on the vista machine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Read the info on above link and the links in "see also".

  This may be your problem:

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  See you soon. Mick Murphy - Microsoft partner

• This computer is no longer allowed for the applications installed on your iPhone

  I tried to sync my iPhone 6 more with iTunes in my MacBook Pro.  During this process, a window popped up that says, "this computer is no longer allowed for the applications that are installed on the iPhone" iPhone 6 more "." You want to allow this computer to items purchased from the iTunes Store? »

  I clicked on allow and another window popped up that says, "Enter Apple ID and password.  If you have an Apple ID and password. Enter them here. "(If you use the iTunes Store or iCloud, for example, you have an Apple ID.)  "You can authorize up to 5 computers for each Apple ID."

  Apple has recently replaced the logic board on my MacBookPro (early 2011).

  There are 3 iCloud Apple ID.  First of all, I allowed my MacBook Pro.  Then he asks the password of the Apple ID for my iPhone 4.  While I was still with my iPhone 4, there was a problem and Apple technology had me install a new Apple ID.    Then I was asked for passwords for the Apple ID for iPhone iPad Air and 6 more.  Then another pop-up window says, "the authorization of the computer succeeded."  "You have allowed 5 computers on your 5 available."

  This could be 5 'computers' if Apple still has the original map of the logic.  It is always 1 MacBook Pro, which has a new logic board and if I called the Apple Support, I guess the UUID hardware is Apple going to buy and I did that for this new logic board, but not for the old.  I would have thought when the old logic board has been subscribed by technology, he or she would have known in order to erase the original UUID for my MacBook Pro in the main Apple system and replaced it with the new.  BTW, the old logic board works great.  It was the video card that was bad and my computer has a problem to wake from sleep or boot.  Everything worked very well when I took it for repair, so technology might have gotten the UUID of the old logic board.  Since I'm not a computer tech, I'm probably missing something.  I don't understand why I had to do it all.

  So, how can I get this problem fixed then the old logic board is not counted?

  Thanks in advance!

  Note: where it is said to 'Select a category', 'importing & Burning in iTunes', was the closest I could come to picking a category.  If I posted this in the wrong place, please move to the community right and made me know.  Thank you!

  You need not do anything.

  If, in the future, you need a permit for a new computer, then just reauthorize all, then allow all of your active computers.

• I go to sync my phone and he said: ' the iphone couldn't sync because this computer is no longer allowed for items purchased on this iphone» When I go to allow it is said that it is already permitted. ios9.3.1, iphone 5 s

  I go to sync my phone and he said: ' the iphone couldn't sync because this computer is no longer allowed for items purchased on this iphone» When I go to allow it is said that it is already permitted. ios9.3.1, iphone 5 s

  Hello dinukago,

  Thank you for using communities of Apple Support.

  Since your post I understand that you get an error that your computer is not authorized for items purchased on your iPhone.  As you tried to allow already and know that your computer is allowed, then it seems that you have the content of another Apple ID on your iPhone.  If you have any other Apple ID then please allow your computer so that it be synchronized.

  Allow your computer in iTunes

  Take care.

• the iPhone couldn't be synchronized because this computer is no longer allowed for items purchased on this iphone

  I know there are several solutions for this problem, I spent weeks trying different options but not solved my problem.

  Here is my scenario, I have a Mac Pro and my iTunes folder was on another internal HARD drive, I used Yosemite, I picked it up and then clean up El Capitan, then I launched iTunes and linked to my old iTunes library, so far, everything is OK and I can see my music, videos and applications, then I connected my iPhone 6 and backed up to my system up to what we want to do the sync and that when the context menu is displayed with the following error message:

  the iPhone couldn't be synchronized because this computer is no longer allowed for items purchased on this iPhone

  I followed various solutions such as:

  Meet a disconnection on iTunes in my iPhone to my computer, the connection of my account in iTunes, and restart the system and iPhone, then from iTunes and reAuthorizing my computer, and then try to sync and I always get the same error above.

  It's really frustrating, because I even created a new library to see if that would help and it has not yet.

  I've only used an Apple ID account, I never bought any music or application to another user.

  Any help would be much appreciated.

  I've only used an Apple ID account, I never bought any music or application to another user.

  This message refers to the items purchased on the iPhone.  The following synchronized on your old Mac, who has apparently been authorized for purchased items.  Your old Mac was authorized from your ID Apple and another Apple ID (someone else)?  If so, perhaps there is something on the iPhone that was purchased with this other Apple ID.

  In all cases, what are the options given with this error message?  If an option is to eliminate items that are "is no longer allow", let iTunes do it.  If you have never purchased items with another Apple ID, you have lost nothing.

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• HP Deskjet 3050 a J611n: scan of the computer is no longer available since windows 10 download

  After downloading windows 10 to my laptop last week surprise, I can't scan from this upgrade and get the message that the scan to the computer is no longer available. I tried different routes to make it work again in settings, but I can't get the article that will allow me to choose scan of the computer. I also seem to have something in 10 called windows webscan, I can't activate it either. Any ideas how to resolve this would be greatly appreciated.

  @loki4

  I'm sorry it doesn't - there are perhaps other issues (HP or Microsoft drivers and software) preventing to install printing software and works as expected.

  Migration from one operating system to another can be brutally hard on the file system.

  Going to bed.

  A few random ideas:

  When you try again - restart all:

  • Shut down / off everything, including the router (and all connected mobile devices) >
  • Leave the router (in condition off the coast) a few minutes > bootstrap router > wait a minute >
  • Start or computers on the network > mobile devices from start > printer start

  Remove any program of printing of programs and features

  Make sure that your Adobe Reader DC is on the latest version (and Flash, too)

  Printer's happiest with an Ethernet - and a static IP address if you have stability issues

  Run Windows updates several times after a migration; There are sometimes more than one session so that everything is loaded.   Check to see if you are ready to install the "other Microsoft" software with your Windows updates.  View history.  He tells you?  Not sure - always good to know what Microsoft adds to your system...

  Start (screen) > settings > update and security > Windows Update > Advanced Options

  If you are running McAfee security - you might need to update, reinstall it, or disable it temporarily.  (I don't really know this; I guess.)

  Switch your UAC (User Account Control) to "notify me only when apps to try to make changes...» "(slider / option second from the bottom):

  Control Panel > display icon > user accounts <> change user accounts control settings

  The troubleshooting Section:

  Occur after Windows 10 upgrade, printer problems

  User Guide

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• ON the computer Vista Home Basic is not able to analyse the updates of the last one year and I already disable the software of MAcafee and stop and start the updates of windows, the cryptographic services, services of BITS. Still, I don't get the resoluti

  With the help of computer Vista Home Basic

  Hi Rupesh Goel,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• How can I get my computer to recognize my new camera?

  I just bought a new elph of Canon 100 - I loaded the software but my computer does not recognize the camera being hooked up to it - know not why this is happening - in the past I have installed other cameras without this problem - I used the disk to download the software and it says succesful - but when I open the program, he said won't connect - check the conection to camera

  Wednesday, May 30, 2012 20:24:24 + 0000, R.C. 8901 wrote:

  I just bought a new elph of Canon 100 - I loaded the software but my computer does not recognize the camera being hooked up to it - know not why this is happening - in the past I have installed other cameras without this problem - I used the disk to download the software and it says succesful - but when I open the program, he said won't connect - check the conection to camera

  You have installed the correct driver for your camera and your version
  Windows?

  And by the way, you need to connect your camera directly. Buy a
  card reader for the type of flash card your camera uses (they are very
  inexpensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• When I copy something, my computer is no longer scrolls. How to fix this?

  When I select an article that goes beyond what is on the screen, my computer is no longer scrolls down.  I have changed a setting... How to fix this?

  Hello

  1. You did any recent changes?
  2. This happens when you're online?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.