Computer Vista t not shutdown, standby or Hibernate mode

Similar Questions

• XPS cannot switch to standby or Hibernate mode

  Hello

  I saw a similar post here, but I couldn't solve the problem...

  My Dell Studio XPS 13 has a strange problem:

  When I close the screen (it closes down), the computer is not enter standby or hibernation mode, and rather that the screen turns black. 'normal' in the keyboard lights stays on and lights side indicate that the computer is running always full power. You can say that on hearing the noise of ordinary fan.

  Trying to put it to sleep by start = > sleep/hibernate - the same thing happens - computer still works but the screen goes black.

  Basically, therefore it is blocked until I forced closure (by the close button).

  Should I update the BIOS? would it be useful?

  I use windows 7.

  Thank you...

  Hi oren_m,

  Please check the power options are set to sleep/hibernate for the option "when I close the lid. (See attached snapshot)
  If the problem persists, please reinstall the graphics driver. Enter the number of Service and the appropriate operating system and download the latest video drivers from the link below.

  http://Dell.to/T2hKYc

  

• HP elitebook 2530p wake from standby or Hibernate mode

  Hello world

  I have a problem with my 2530p elitebook but I do not know how to solve it, please give me your suggestion. Here's the question:

  After placing the computer into sleep or Hibernate mode, it seems quite dead. The keys that are supposed to wake the computer have no effect. When I press the button to wake up the LEDs light up and the fans turns on but the screen remains black. Finally, I have to stop it using the switch, then start it again. I am running XP.

  I'm looking forward to your reply.

  See you soon,.

  M

  Try flashing the latest BIOS revision for your laptop, it seems the problems of sleep and hibernation. Before you do, check your BIOS revision when you start the configuration utility.

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• Computer * Vista * will not recognize Sansa Clip

  I checked the USB port and it is fine, but when I plug it in it does not appear on my computer.  "I tried on my computer laptop son * Windows XP ' and it shows up there.  Can someone help with the Sansa Clip and Vista?  Thanks in advance!

  Have you tried switching USB mode of the Meteorological Service of Canada, or forcing MSC mode Clip (hold the Center button down when you connect USB cable between computer and Clip)?

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.

• Computer Vista will not be stopped

  I tried to shut down my computer for days now.  Vista - and still running, he simply refuses to stop.  Suggestions anyone?  I have all the SP2 updates and I tried just August everything I read about to solve this problem... except the only thing that works!  Thank you

  Hello

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: disable the functionality of management of power in network adapters

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all of the checkboxes are checked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2:

  If the problem persists, you can try to perform the clean boot and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• Computer Vista will not print to Deskjet 930c on home network

  Our three computers (Vista is A, B, and C are XP) are connected to a wired network of private home.  Computer A has a Canon printer that is shared and all 3 computers can print to that very well.  Recently, we re-gasket a printer HP DeskJet 930C to computer B (via USB) and shared.  Computers, B and C can be printed on the HP very well.

  But, even if A computer can see the printer, it will not print.  He seems to accept the print command and sometimes a dialog box flashes on and so quickly as it cannot be read, but nothing prints.

  I worked through the Microsoft article "File and sharing printers in Windows Vista" at http://technet.microsoft.com/en-us/library/bb727037.aspx#mainSection and you don't see anything that solves the problem.  I ran the doctor of printing & scanning HP and who wrote the 930C is installed but not connected.  According to the website of HP, Vista has the correct driver.  I have uninstalled and installed the printer from computer A, but it still does not work.

  So I called HP Support, and they said that I had done all the right things, and "it must be a registry problem.  This seems unlikely to me, and I don't know where to look in the registry.

  Any ideas or solutions?

  Hello

  Windows XP sharing can be done automatically in XP or operating systems, XP does not host the drivers for the newer Vista operating systems and so you will have problems with some models.

  To manually add the shared printer, follow these steps:

  1. install the printer locally in following second method: connecting the cable in parallel below:

  http://support.HP.com/us-en/document/c01655752

  2. go into your PC host (computer B), right click my computer and select Properties.

  Find the name of computer on this screen.

  3. go in Control Panel > printers and faxes.

  Right-click on the printer and select Properties.

  Open the tab end hand note the share name

  Note: I would say keeping the name of sharing as simple as possible (e.g., 930C)

  4. go to your Vista machine and open Control Panel > printers.

  Click with the right button on the 930c configured in step 1 and select Properties.

  Open the Ports tab.

  Click Add a new port.

  In this list, select Local Port.

  Set the local port in the form of \\Computer B Name\Printer share name (for example \\PC-P\930c).

  Confirm the changes and check any change.

  If you have still any question, I would say that the printer is connected to the Vista machine, then share it with the XP PC and check for any changes that should run more easily from my experience.

  Shlomi

• Computer Vista will not complete start up once the updates have been installed

  Office worked well on 20 January, until the update when you restart it should start going to black screen with cursor. I tried to fix it, but it does not work. I tried the system restore to an earlier date but gives the error. Does anyone have ideas, which is false.

  Thank you

  Lisa,
  At this point if you have a way to back up your data, I suggest that do you so as soon as possible.  Start the XP that you have installed.  Then copy all your data from the original Windows folder to an external drive or a DVD.

  Then, to try to make this repair, boot from the XP disc and select the recovery option.  This will start you in the recovery console prompt.  From there, you can then run the commands to replace the sam file.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer Vista will not format DVD RW drives more

  I have problems with my DVD disc burning, windows formateront is no longer my DVD - RW discs but will format my DVD-R discs, what can I do as I don't like having to use disposable DVD discs all the time? I'm just a learner so im very confused, please help me... thanks

  * original title - formatting issues. Windows reformatted is no longer my DVD - RW discs.*

  Hi nicky271,

  ·         Did you format the disc earlier?

  ·         Remember to make changes?

  ·         What happens when you try to put in the form of these discs?

  Step 1: We will uninstall the DVD drive in Device Manager and reinstall. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on computer. Click on properties.

  b. click on Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Vista does not recover from the sleep mode.

  Black screen when the computer is idle

  When my computer is idle for a while, the screen goes black.  I used to shake the mouse and he came right away, but now I have to reboot each time to get my computer to work.  I have Windows Vista Home.  Help, please!

  Original title: black screen

  Hello Taylorlmjp

  See the following two articles concerning the problem you are having with your system does not sleep. Also, if this system was purchased to manufacture such as Dell or HP, you can check with them and find out if they have an updated bios updated. Thank you.
   http://support.Microsoft.com/kb/930091

  http://support.Microsoft.com/kb/266283

• Failing 10Z NB200 standby or Hibernate mode

  Hi, I hope someone can help. For the last two or three days my NB200 were hung from windows 'preparation to sleep' or "preparation for the Hibernate" screen and the only thing to do is prolonged pressure on the power button. What is happening with both the FN keys and through the start menu. Sometimes it is suspended during an internet session when the Windows menus are accessible by any selection or closure is possible. I do not download other programs that updates for Firefox, Windows and antivirus. I use Windows XP. Any advice?

  Hi jillp,
  Search for the question...
  or do a cover...
  or try a previous restorepoint

  I don't know that it is a software problem...
  I would like to recover the default unit and watch if the problem disappeared...

  sure your data first!

• Vista will not start even in safe mode

  Download service Pack 2 electric exploded Vista start the system restore / boot cannot fix blue screen with stop: 0x0000c1f5(0x00000000,0x00000000,0x00000000,0x00000000), can anyone help thanks

  Hi, HJ85,

  To resolve this problem use these threads for reference:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  Stop error when you start a Windows Vista-based computer, even if the hotfix 946084 is installed on the computer: "0x0000C1F5".

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer