computer will not be in hibernation
Something in my system constantly wakes up my computer. I can do manually put into hibernation and that is fine, but if I put it in an hour he will sleep and then wakes up again. I said it's a program tries to access the net, but I have no idea how to find him.
Go to the device, network adapter Manager, right click on the Ethernet adapter and go to properties, click the power management tab and uncheck the only 2nd box that says 'allow this device to wake the computer', then click ok and restart the pc.
The activity of the NIC maintains wake the pc.
Also make sure this oyou have Vista Service Pack 1 installed on your pc.
Tags: HP Desktops
Similar Questions
-
My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html============================================
After the foregoing: a Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offMay need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
After the recent update of Win7, computer will not remain in hibernation
After a recent update of Windows (probably to fix something else), my computer refused to stay in hibernation.
This is a 64 bit machine running Win7 Pro, and he wakes up now randomly after going into hibernation.
I tried using 'powercfg' to see what is wake it up - no result.
I tried to use 'powercfg' to deny the mouse and network which apparently have permission to wake up-no result.
I unplugged the mouse in case there is a vibration of the earthquakes to chance - no result
I unplugged the cable to the router in case there is a stray signal from on the internet - no result
I went into the "Network properties" window and turned off all the "wake up" properties - no result.
I looked at similar questions on this forum and checked "of performance issues" in the Panel as not advised - no problems to report.OK - what makes the Microsoft with a recent update to cause this problem and when they're going to cancel it?
Hello
Try the following and see if it helps.
Method 1:
I suggest you to check the update history to discover the updates installed by following the link:
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
Method 2:I suggest you perform a clean boot and check if it helps.
Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.Method 3:
I suggest you to see the steps in the following Microsoft article and check if it helps.
Reference: (why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake?) from the following link.
Sleep and extended: frequently asked questions: http://windows.microsoft.com/is-IS/windows7/Sleep-and-hibernation-frequently-asked-questionsHow to disable and re-enable hibernation on a computer that is running Windows: http://support.microsoft.com/kb/920730
Note: If you still have the problem then I suggest you to perform a system restore to a point when the computer was working fine.
System Restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore
-
Compute will not be from hibernation
I have a laptop Toshiba Satellite with Windows Vista. My brother was playing with my computer last night and installed something here. When I went to get back on, it wouldn't come out of hibernation mode. So I restarted and it had a weird start screen and I re did it again and it took a few minutes for the paper onscreen to come. Then it was fine.
Now, today, I and the login screen would not come again so I had to re start it. So I did system restore for I think that October 29 and again if it is and is in standby it won't come out of him. I don't know what to do and I don't have the money to get a new computer or for repair.
Hello
2 methods
1 try to fix
A Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
More if necessary:
Check your BIOS/CMOS for Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offMay need to reset all to default power settings and then place back as you prefer.
=====================================
2. perform a system restore (try above 1st)
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Computer will not be put into hibernation when I close the lid
I have a problem with my laptop. It is a series of Toshiba C55. When I close the lid it will not be in hibernation, even if I set power options to do so. This happens not all the time, but it happens enough that it's boring. If I close the lid and it will not be in hibernation, which means that it is in danger of overheating if I put in my backpack. If I use the start menu, it just goes to the lock screen, that's what I suspect it is when I close the lid. Help on that would be great.
Hello Michael,
Please keep us updated on the status of the issue.
I appreciate your time and your efforts.
I suggest you to update BIOS and drivers from the chipset and check the issue.
Please update the chipset drivers from this link:
http://cdgenp01.CSD.Toshiba.com/content/support/downloads/tc50157200c.exeUpdate the BIOS from this link:
http://cdgenp01.CSD.Toshiba.com/content/support/downloads/scf6v140.exeNote: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of the
the settings are at your own risk.
I hope this helps.
Thank you
-
Portege z30-b-14z 10 Pro 64 bit will not be in hibernation
Dear all,
My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.
I can not hibernate through the following methods:
1. click on 'Start', 'power', 'Hibernate '.
2. press x and windows, click on 'Close or disconnect', click on 'standby '.
3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.
Well want to can someone help?
See you soon,.
Bender22Dear all,
There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.
I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.
Can anyone help, because Toshiba cannot.
See you soon,.
Bender22 -
Hello
my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even blockThanks for your helpHello edwardmurray21,
Thank you for the question!
It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.
I need to ask you some questions to help you best.
1. what operating system is installed on the computer?
2. which browser is installed on the computer?
3. What is the brand and model of the router?
Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
My computer will not download iTunes or Skype error APPDATA and ASL.ll
My computer will not download iTunes or Skype because he "cannot find"APPDATA"and ASL.ll. Can anyone help?
Hello
1. where exactly you want to download it?
2. What is the full error message do you get?
3. what operating system is installed on the computer?
4. what web browser do you use?
I suggest refer you to the procedure and check if it helps.
Method 1:
I have a problem downloading Skype: https://support.skype.com/en-us/faq/FA164/i-have-a-problem-downloading-skype?fromSearchFirstPage=false
Method 2:
Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926
Hope this information is useful.
-
trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?
See if this helps:-
If she please vote as helpful.
I use the software that you want to remove and would recommend not removing it because 2 times last year he picked up the items that Microsoft Security Essentials does not.
-
my computer will not defrag... Guard reboot
Computer will not defrag guard reboot... why
Hello
Check the hard disk for errors.
Follow the steps of
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
-
The computer will not send messages I type, but it receives messages correctly
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network
the computer will not send messages I'm typing... but he recedives messages aok...
Hey Keithkohrs,
Usually, this means that outbound connections to the server are not properly Setup. Try contacting your email provider to ensure that your server settings are all correct. We can try to help you get the server settings appropriate if you let us know who provides your email address and what program you use as an email client.
Hope that helps.
-
My computer will not download an update, then stop not
Original title: no closures
My computer will not download an update, then stop not
Hello
Whatupdates fail to install?
Trying to download update windows from the Microsoft Download Center and install it as an administrator.
Here's how you install as Administrator:
a. right-click on the Setup file and selectrun as administrator.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I use Windows xp home edition. I have McAfee Security center for virus protection. My computer will not update automatically or manually. I downloaded windows defender and it will not update and I get error code Ox80004002! Any suggestions?
Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»
http://support.Microsoft.com/kb/956708TaurArian [MVP] 2005-2010 - Update Services
-
So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.
Hi cavalierfanatic247,
Thank you for using the Microsoft answers Forum.
Start on Safe Mode desktop.
Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.
If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
http://support.Microsoft.com/kb/290301If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.
To restore the operating system to an earlier point in time, follow these steps:
Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
In the System Restore dialog box, click on choose another restore point and then click Next.
In the list of restore points, click a restore point created before you started having the problem, and then click Next.
You have an Essentials and HP drivers disk?
If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.
Click Finish.
You can see the link below for more information:
http://support.Microsoft.com/kb/936212
I hope that this will really help you, good luck.
Kind regards
Manasa P-Microsoft Support -
My computer will not be updated Service Pack 3 for Windows XP
My computer will not be updated to service pack 3 for windows xp, I tried to install from the Web site, as well as through automatic updates and I'm still not able to servie pack 2 on my computer and from the service pack 1 of my other... help please!
Original title: Windows XP updates
Just in case:
Maybe you are looking for
-
I keep getting error for these updates messages - error codes are 646 and 643. Do I need these updates? Microsoft .NET Framework 1.1 Service Pack 1 update security for Windows 2000, Windows XP, Windows Vista, Windows Server 2008, Windows 7 and Windo
-
The objects window &; instant in JDE. Does one exist in Eclipse?
The JDE has a capacity of window & snapshot of objects to help identify the number of objects used in a BB app. Does anyone know the equivalent in the eclipse environment? Thank you
-
PS cs5 to crash when trying to print
When I try to print the PS form it blocks every time... I recently did an update. What I am doing wrong?
-
size of files when saving for the web
'Save for web' sometimes export icon to very small size with size huge file (500Ko), when I take the same image and re - record using "Save for web", I get the small file (1 or 2 KB)Why does this happen?