Computer will not stop connection at the start of the neighbor

Similar Questions

• Laptop computer will not be connected to the internet.

  Never had a problem with my laptop (windows 8, toshiba) until today. It's only a couple of months. I tried to connect to two different WiFi my laptop disconnects and say that the network is 'limited' I have other devices connected and know the WiFi is fine. When I plug my laptop to charge it is fine and remains connected. This isn't usually the case. What can I do?

  Hello

  Don't forget to update the drivers of network, as indicated below.

  Check with support of the system, their drivers and documentation online manufacturer and ask
  in their forums on known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ---------------

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• . What's wrong? COMPUTER WILL NOT STOP UNTIL I hit Cancel or end of program. What program?

  When I hit the stop icon, to turn the laptop off a window notification window notification saying-end-support from the framework programme. Program does not, click on cancel or end of program. Computer does not stop until I have click on program ends or cancil, which I do not know what he's talking about? The Task Manager is not apear when I hit ctrl, alt, delete togther. It does not appear? Thank you

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the article to put your computer to a normal startup

  Method 2:

  Check out the following link.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I hope this helps.

• Program of the end but the computer will not stop

  When I shut down my computer I getEnd bc and end program 3ac errors and it will not be closed.

  Let's start by...

  http://www.Malwarebytes.org/

  Download and scan and remove anything it finds.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• CHKDSK will not stop. When re-starting pc it goes back into the chkdsk command. When I try to boot in SafeMode (f8) happening in chkdsk. In addition, the CD/DVD does not work so I can't reinstall XP.

  After installing windows update was the CD/DVD drive on my Dell desktop computer was not recognized.  I downloaded drivers from Dell.  My pc has stopped and went into blue screen mode.  I don't have the error codes.  I got into safe mode and tried to run chkdsk.  Now, it is in a loop constant chkdsk.  It restarts automatically and run chkdsk again.  I interrupt to start safe mode by pressing F8, it gives me all the options of safe mode.  But after I selected one, it goes in chkdsk again and repeat the cycle.  In addition, given that the DVD drive is not recognized I have no way at this point to reload XP.  The only thing that I have access to are 'start-up' and 'set-up '.  I can change these settings, but so far nothing that I changed it helped.  Thank you!!!

  kag187,
  You need to access your BIOS (usually like F2, F10 or Delete at the moment it starts to boot, I must say on the screen).  Then set your boot order to boot with the CD player.  Then boot the XP disk.  If your system is not to see the player you have a hardware problem and nothing did\could from Microsoft, which would cause.  If the BIOS does not see your drive then ck with your OEM manufacturer for a firmware update or a new disk.

  Good luck QQ learn to deal!

• HP Officejet will not be connected to the wireless network?

  I have a HP Officejet 6500 wireless which will remain not connected to the network over a half hour or so, max.  My wife runs a laptop XP Pro and I have a Macbook Pro with Snow Leopard.  She NEVER problems printing, but my computer is always looking for the printer unless I re - connect via the wirelss Wizard.  I also use a Westell 327W Versalink router/modem and I have connected my Mac via Bonjour, if that helps.  Any ideas out there?  I even reinstalled the router right next to the printer thinking that may be the issue.  He STILL abandons the connection, but it's funny that my wife's computer is not...

  OK, let's assume that your Mac software is correct for now.  Its probably a good assumption.

  We will define an IP address from the printer.  This can help find the network when he wakes fashion 'sleep':

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). In your case, is that 192.168.1.15 to 192.168.1.47 can use 192.168.1.50
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Media Player will not stop playing when the close button is hit.

  My media player works fine until I try to close. When I watch a video clip, I make sure that I have 'stop' the clip before I "close" (the little red button with an X in it, which is suppose to close the program) the player or clip will continue to play in the background. If I brings up the Task Manager, it will display no programs running, I can still here the clip and I'm going to start > all programs > media player always plays the same clip. It is not suppose to do this right? If it is then how can I change so it 'close' media player?

  Hi major347,

  Thank you for writing to Microsoft answers Community Forums.

  This one seems to be really weird when you began experiencing this problem?

  You have a connected PDA that uses the media player? Sometimes Windows Mobile Device Center has been continuously the reactivation of WMP.

  Another possible issue of the keyboard that you use may control the media player. There are known of the problem with the Logitech keyboard software. Try this if you have a Logitech software update.

  Try to open the Task Manager is trying to kill the wmpsideshowgadget.exe process and check if it shutsdown.

  If it works there, then, open the CONTROL PANEL

  Double-click WINDOWS SIDESHOW

  Uncheck everything that has to do with WINDOWS MEDIA PLAYER

  You can also try to disable sharing in media player click on... Tools-> Options-> library-> configure share-> uncheck the two 'media find others to share' & "share my media".

  Check if it works.

  If all the above fails try to perform the clean boot

  How to perform a clean boot:

  http://support.Microsoft.com/kb/331796

  Try doing a sfc scan and see if that makes a difference

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Kind regards.
  Nicolas Mathieu

  Microsoft technical support
  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/Microsoft answers feedback Forum > and let us know what you think.

• Windows 7 (pro?) will not be connected to the non - Internet

  Summary: We do a workshop where we have set up a private network that is not connected to the Internet. We have a fleet of laptops (11 of them) that connect through an open wifi router. The router provides DHCP, and there is also a web server and database on the network server.

  We have laptops with Windows XP and Linux, as well as the Chromebook and Macs. Connect regularly and reliably. However, we had three different Windows 7 laptops of three completely different companies with the same problem. They will connect at first, but then get into a never-ending display of 'limited internet access' cycle, disconnection and reconnection.

  All three of these laptops work very well on all other wireless networks. One of the laptops is Win7 Ultimate 64-bit (not sure the others). Now, this laptop used to work perfectly, but still has this problem. Some other Windows 7 laptops have worked in the past.

  Computers portable Win7 will connect and work very well with a wired connection.

  Then... It is not a problem with the router or the network, since any computer non-Win7 laptop works perfectly. The router is started fees at each workshop, and the problem persists, but * only * on some Windows 7 laptops.

  It is probably not a problem of drivers or virus, given that laptops work fine on other networks.

  We tried to adjust our network "Preferred" and "Connect automatically" in Win7 - no joy.

  Windows 7 has a certain logic that causes the disconnection of a wireless network if he does not have an Internet connection?

  Hello

  Thanks for posting your query in Microsoft Community.

  Your question is about the web and database servers, I recommend you to post your question in the Microsoft TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• Windows keeps refreshing. Will not stop even after the resumption of the plant.

  A week ago I decided to test my windows aero desktop number. It was gray with a 4.0 remained to a 4.0. After the test, all operable Windows I keeps refreshing. Content not be refreshed but the fact of the shell (if necessary). If I drag the window it will jump to where I started dragging it since. No one knows how to fix?

  P.S. I did a cover of the factory to try to solve, and it did not work.

  Have you also all the updates and service packs - they had erased at the resumption of the plant and must be reinstalled at all.

  You can get in trouble with your device drivers (those on the factory recovery disc may be obsolete).  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get updates for your video card and monitor at least and all the others you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, it could very well be a real hardware problem (since dismissed pretty much factory relocation a software problem, except for updates unless you have already done as well).  Here's how to do a little troubleshooting on your own equipment:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  After that, I would either return it to the manufacturer for repair or find a well known local computer repair shop to diagnose and repair (or replace) the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PC will not stay connected to the Internet in the evening.

  (Moderator note: title was "network programs network networking Internet Web site Site Web Web Site URL")

  My Dell laptop that was purchased in March, 2012, had no problems to connect to the internet until recently.  Now it connects the morning, but stop connection from about 18:00.  Why is happening.  My router is Lynksys.

  Margaret,

  I guess that your laptop will connect to your wireless router.

  If your laptop loses connectivity each day at roughly at the same time (18:00), then the problem could be due to the interference of the networks your neighbor's wireless.

  There is a setting in your router for the channel to use for traffic wireless (channel 0 to 11).

  If you can find this setting, then change it. The best channels to use (with less interference) are 0, 6, and 11. Your router is probably set to one of these three (but can be assigned to any channel between 0 and 11). Change the string parameter (and try 0, 6 or 11... that we're different from the one that is currently in your router).

  If you can't control the settings of your router, try to do a google search on the brand of your router (linksys), model and word settings... you should be able to find a description on how to change the settings.

  If you want to get into more technical details, use the free utility called inSSIDer... it can be used to see exactly what interference your wireless router is your neighbors... to help see you in the selection of a channel which is not used by your neighbors.

• I have Dreamweaver CS5 with Windows 8, and it will not stay connected to the server and it says: I need flash plugin, please help

  I have a Gateway with Windows 8 computer is installed.  I installed Dreamweaver CS5 to manage my Web site, and it will remain not connected to the server.  Also, it will not play flash and said I need a flash plug-in.  Help, please

  #1, try the FTP mode passive switching power in the definition of your remote server site.

  

  #2 with the exception of a handful of gaming sites, Flash is a web technology dead.  It is not taken care of by iPhone, iPad, iTouch, Android, etc...  I don't recommend to use Flash for anything these days.  Better to use HTML5, JavaScript, and CSS level 3.

  Nancy O.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• DV6Z will not Auto-Connect to the Wi - Fi connection

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  GP_01 wrote:

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...