Computer will not use the drive when you restart.
I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).
I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.
The problem is that nothing happens. The computer does not use the disk when it reboots.
Anyone experienced the same problem with the recovery disk?
I'm not having any other problems with the ROM, works perfektly once Windows is running.
Thank you
You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Why Lightroom will not save the file when you use the image Capture?
When you work with video in Lightroom 5, whenever I press "Image Capture", I get an error message that says: "cannot save the file." I tried this on several video files, and I get the same message. Video files are. MOV files. I can't understand why this is happening!
I had this same error message. I solved it when I moved the video file on the hard disk internal to the computer, and then it worked perfectly. He always gave the error message when I used an external video file from my hard drive. There for a long time until I tried this. No one answered this problem in forums that I could find.
I hope this helps.
-
Tool Direct Selection will not show the handles when you click the path.
When I draw a line, no matter if it is done with pen, pencil or brush tool and try to choose a point with the direct Selection tool, it does not have a choice, I can not get the active handles. They don't show at all. It only shows the line transform handle. This only happens in a certain file. When I open a different file or create a new one, the problem does not exist.
ACCA,
CTRL / Cmd + H.
Turns on and off display > show/hide edges.
The combination of keys Ctrl / Cmd + H is the most vulnerable, completely surrounded by all other combinations of keys only to destroy things when you look elsewhere pending. Or you have tried to use one of them, then just repeated (thought you) when he (apparently) did not work the first time.
-
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive... File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop. I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).
Creation 2007
Last updated on 2003
2010
Any help would be appreciated.Mahalo,
Philippe
Ran the Scan, the system is secure.
I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder. I was then able to access. Somehow I messed up the permissions in the previous transfers of old machines and OS.
Thank you for your help and attention.
Mahalo,
Philippe
-
My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer. Help please.
Thank you, Nicholas Cooper.
Here you go:
- Right click on the installer.
- Click on "Run as Administrator".
-
my computer will not install the update of security for Windows XP (KB2481109)
Moderator before go Note: IE8.
-----my computer will not install the update of security for Windows XP (KB2481109) can you help me.
Hello
(a) don't you try to install the update manually?
(b) you get any error message?
(c) don't you make changes to the computer until the problem occurred?
(d) what anti-virus software is installed on your computer?
I suggest you try the steps below and check if it helps
Method 1:
If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs
Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.
Method 2:
I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:
http://support.Microsoft.com/kb/310353
Make sure that return you the computer to a normal startup mode once it's done.
Additional information: make reference in the link below:
http://support.Microsoft.com/kb/2481109
Hope this information is useful.
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning
Hello
If you use Norton, which could interfere with the restoration of the system.
Disable Norton while doing your system restore.
See you soon.
-
I bought a new computer and also Adobe acrobat Pro XI. It did not work properly. I uninstalled and tried to reinstall it, but the computer will not accept the serial number. What can I do?
You accidentally type in a redemption code when he says he only wants a serial number?
-
I have a pavilion p6130fpc and it will not see the drives.
I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?
Willman,
Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.
-
My computer will not install the last update of security mpam-fex64 [1] .exe. I have
Windows 7 home premium, X 64 based PC. Does anyone have any suggestions? Windows gives me the message that the update failed. I get the error 66 has code.Hello sajanclt,
It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
http://social.technet.Microsoft.com/forums/en-us/category/forefrontThey will be better able to help you.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I just bought the rest of photography, then a message popped up on the screen saying that my computer will not support the program. Will I have to pay?
Please check the terms of System. Photoshopand unresponsive to your material, please update your computer or cancel the order, for this you can contact customer service
[Note: make sure that you are connected to the Web site with the valid Adobe ID under which the product is]
For more information on cancellation: cancel your creative cloud membership
Maybe you are looking for
-
Equium A100 - will be the responsibility of recovery on a new HARD drive disk
Hello Don t know if anyone can help, I am just out of warranty by a month and I think that my hard drive has failed, or I had a virus that has hit loads of files and the PC is always eager to run the disc scan and still get errors on commissioning, s
-
You can set reminders to repeat
You can set reminders to provide alerts repeated unread messages or voice messages on 5s-6
-
It is not an option to select the registry editor
original title - same topic-other problem When double clicked on addspooler.reg & open with is selected, there is no option to the registry editor select. You said there was another way - that was my question. Thanks for any help.
-
I got 2 emails telling me that I sent a password reset for my account hotmail, when I did no such thing is a way to know who is trying to get into my email account? My e-mail address is * address email is removed from the privacy *. Send replies it t
-
Dear community. Cannot find out how to move the rear slider to insert or change the text already entered. Seems I can only achieve changes by removing everything that has followed from the error. That could be quite a few extra hits. Nothing usef