Computer won't recognize printer

Similar Questions

• My computer won't recognize any of my devices from CD or dvd

  My computer won't recognize any of my devices CD or dvd, including integrated both. My sony makes noise when I unplug and plug it so I don't know that it connected.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• My computer won't recognize bluetooth headset! Error message 'Discoverablilty and connectivity settings were not saved' and 'Bluetooth Exchange folder is not found' by changing the properties of bluetooth

  Original title: my computer won't recognize bluetooth headset!

  When I checked "Allow bluetooth devices to find this computer" under the "Option" menu, I got the error message "Discoverablilty and connectivity settings were not saved. Another message error I got is "Bluetooth Exchange folder is not found".  Although I copied this file from my backup data files, the problem still exists.

  I used to use able to connect to my computer with the headset.

  Please advise me what I have to do.

  Hi Venturer016,

  Remember to make changes to the computer before this problem?

   

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer won't recognize Zune

  I just got a Zune and downloaded the software for this, but my computer does not recognize it. The small symbol in the lower right corner does not even says somethings connected. It's not cuz ive tried ports all four, and other devices work in them. I tried goin in Device Manager to search for portable devices, but I can not even find a line indicating the portable devices. I got from a friend so its not nine. The cable is not broken cuz she sees very well. What can I do to make my computer recognize it?

  Hi Samantha,

  What is the model number of your Zune device?

  In addition, take a look at the following article in the Microsoft Knowledge Base that has a solution for the question posted by you.

  Your Zune device is not detected by your computer or the Zune software

  http://support.Microsoft.com/kb/944909

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer won't recognize headset

  My computer does not recognize the headphones that are plugged into the headphone jack. I have recently upgraded to windows 7 from windows xp. I can confirm that the plug is not broken, because it worked on windows xp. I plugged in several other computers windows 7 and I have the same problem. The volume remains silent and said there is no output device installed. The audio works with my usb headset, but it is pretty old so I don't use it. It seems that if the headphone jack works only on windows xp. Please do not hesitate to send any comments and don't forget to tell me if there is a solution to my problem

  .

  Hello

  What is the brand and model of the computer?

  If you are using a desktop computer, please put on the headphones into the back socket and check if it works.

  If the problem persists, please update your sound card drivers and restart the computer, and then check to see if that fixes the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-CA/Windows/Update-driver-hardware-ISN

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows/connect-audio-device#1TC=Windows-7

  Hope that the information provided is useful. Do not respond if you need more help.

• Computer won't recognize camera

  I just bought 2 new dells for home and office... they had windows 8... that I find to be horrible... but my true problrm is my digital camera can not download photos... it will not work... computer does not recognize same camera... Please someone help... This os seems like a step backwards rather than before... Thanks in advance

  Hello Jimmy,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the model number of your affected Dell computer?

  Thank you for details on the issue.

  This problem can occur either because of corrupt device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps.

  a. press Windows + W keys together, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  What happens if a wired device is not installed correctly?
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• OfficeJet Pro 8615: Computer doesn't recognize printer

  Previously, when I got Windows 7, my computer and my printer has communicated very well. A few months ago, I myself have spoken in the free update of Windows 10 and my computer does not see my printer, among other things, too. I'll have to reformat my computer and reinstall Windows 7?

  Update: I've managed to get my printer to connect it to my computer, and I printed out a page. What I did I went with the nuclear option and rest the printer to 'factory', my computer doing yet another analysis and this time he has found and connected to it.

  Thanks a lot for your time and assistance.

• Why my computer won't recognize Photoshop Elements 5 after using it for many years?

  Last week my computer raised this notification when I try to open a picture in the elements:

  "Attempt to access an invalid address. Very frustrating, anyone know why?

  Thank you very much!

  Lynne

  Right click on the shortcut for PSE 5 and click on Run as Administrator.

  If this does not work, uninstall Chrome as shown here:

  Re: Elements 5.02 - attempt to access an invalid address

• Pavilion dv7-6157nr: computer won't recognize 6770M

  Recently, while I was using my laptop I noticed that Catalyst Control Center has been the opening is no longer and I could not move from an integrated and dedicated graphics more. Being very intrigued, I decided to try to reinstall the graphics drivers (that I downloaded from the HP website), but when it finished it said committed mistakes during the instalation. After a short investigation, I noticed that the CCC had not been reinstalled. Basically, I can't get my laptop to install the drivers for the 6770M but the Intel HD drivers install perfectly.

  In this case, you have already tried all possible options.

  So, my suggestion you would do a complete factory reset and to me, this seems to be a hardware failure.

  If this does not work even after the recovery, you can confirm the same.

  In this case, you can call HP laptop service and file a complaint. They should be able to help you to organize the laptop for repair. See you soon!

• Cannot add any material and my computer does not recognize one of the ports

  my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned

  Hi gramward1,

  We recommend all first download and install the drivers for the chipset on the computer and check the difference.
  To download the driver, visit the website of the manufacturer of the system.

  Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
  a. connect any USB device to the computer.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
  d. check if the device is detected.

  Step 2: Try to remove and reinstall all USB controllers
  a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
  b. in the list of components, expand Bus USB controllers.
  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  d. restart the computer once you have removed all the USB controllers.
  Note: USB controllers automatically install after you restart the computer.
  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

  If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 4630 won't recognize scanner - printer and utility connect properly

  4630 won't recognize scanner - printer and utility connect correctly.

  Downloaded the software for Mac OS 10.10 altest, but he still does not see the scanner.

  Help, please!

  I uninstalled and reinstalled and it works again.

  Thank you

• My computer does not recognize my new printer correctly

  Well, it's on me.  I got a new printer for the College, a HP Photosmart C4680.  After you run Setup of the printer, I plugged the USB cable on my computer before actually running the pilot, and now my computer refuses to recognize the printer correctly.  I tried to uninstall the driver, restart the computer and the printer, and nothing seems to work.  Is it possible that I can fix or do I definitely made my totally useless printer?

  Hello

  USB cable may be questioned... but one thing... Try your printer with another system and see how it works...

  post the result...

• If my printer USB cable is connected, my computer won't start?

  If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

  Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

  'Teething problems of a PC with a connected external USB drive.
    <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

  Another article I found...  Not sure I can add much further than.

  "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
    <>http://support.Microsoft.com/kb/830957 >

  HTH,
  JW

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us