computer won't start, replaced power has not set

Similar Questions

• Updates made now computer won't start and power saving mode

  After going through the procedure that I received the usual message "loading down updates 1 of 9 please don't turn off your computer ' closing, so I left and went to bed. The next morning, but when I turned on my computer as it has been commissioning a box came on my screen "power saving mode" and entering power saving mode nothing happens. I then turn off my computer and then put it again by pressing F8 I hope go to the options of allowing me to boot in safe mode so I can take it from there. However, this does not work and once more, he'll just right to the power saving mode and is right. Y at - it someone who has ideas for what to do. I am running Windows Vista, if this is useful.

  Hi FrankSpencer,

  Follow the steps below and see if they help.

  Step 1:

  Do Startup Repair from the windows installation disc and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Step 2:

  If this does not help, you can do a System Restore from the system recovery options.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have an Acer 1810tz-4008 and computer won't start battery. New charged battery - what should I do?

  Original title: the battery starting

  I have an Acer 1810tz-4008 and computer won't start battery.  New charged battery - what should I do?

  Hello

  Check with support from Acer.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ===================================

  Other information that might help:

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• If my printer USB cable is connected, my computer won't start?

  If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

  Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

  'Teething problems of a PC with a connected external USB drive.
    <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

  Another article I found...  Not sure I can add much further than.

  "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
    <>http://support.Microsoft.com/kb/830957 >

  HTH,
  JW

• Computer won't start not (Normal Mode or secure); Blue screens

  I have a HP Pavilion DV6 Notebook PC. The other day, he crashed and gave a blue error screen. Since then, it does not start. Ive tried to boot normally and without fail, or work mode. This is the information given in the blue screen. :

  Win32k.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF901C066263C, 0 X 0000000000000000, 0XFFFFF9600006CCA3, 0 X 0000000000000005)

  Win32k.sys - address FFFFF9600006CCA3 base at FFFFF96000000000, Datestamp 53c5df64

  When it crashed first, I played a game, then the screen got all pixelated, then the blue screen. The computer has overheating problems, because the fan doesn't work 100%. He often stops from overheating, but I cleaned the vents out because it has not overheated since. I just want to know if anyone can tell what is the problem of the information above, or if you need more information. Because the computer does not start, I can't crash dump files. Any information is appreciated!

  You can find the model with the help of this name/number:
  http://support.HP.com/us-en/document/c00033108

  What operating system do you use? -vista windows, 7, 8, 8.1?

  You are not able to return to the configuration of the BIOS - press ESC /F10 to configure the options / F11 for recovery:
  http://support.HP.com/us-en/document/bph07110

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01443342

  An update of Windows in August update patches is known to cause-
  Go through this:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Through known issue 3 & it's fix-
  http://support.Microsoft.com/kb/2982791/en-us

  You may need to try to uninstall these updates patches by following the procedure in the fix provided in the article (see if the updates are there in your system first).
  KB2982791
  KB2970228
  KB2975719
  KB2975331

  Kind regards

• Property has changed to the admin on my C drive, now laptop won't start. Autochkdsk program not found error

  I changed the property to the admin of all c drive after that my laptop does not start & I get "program not found... autochkdsk. »

  CHKDSK give me access denied
  sfc/scannow
  Impossible to go to "c:" access denied
  restore, repair, nothing works
  I can't take possession of c because I can't access
  I can't access regedit 'C '.
  I have treid it too > http://www.terabyteunlimited.com/kb/article.php?id=238 but CD does not start
   

  Hey, try the steps in the given article

  http://www.ehow.com/how_2138298_windows-Vista-using-Startup-Repair.html

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my computer won't start with the DDR RAM?

  eMachines T5026 Memory Specifications Standard memory 512 MB (removable) Maximum memory 4. 0 GB Memory expansion 4 Sockets Memory comments PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of processor Processor Intel Pentium 4 519 3.06GHz Model comments Bus 533 MHz, Intel 915GV Chipset front

  Upgrade memory for eMachines eMachines T5026 computer, eMachines eMachines T5026 computer takes the PC2700 DDR SDRAM DIMM. Supports Dual Channel DDR. Type of memory and is installed with 512 MB (removable) of memory. You can upgrade your eMachines computer eMachines T5026 for up to 4.0 GB memory, the system has 4 sockets to install memory, already with 512 MB (removable) standard memory installed. For best performance of the computer, use the maximum amount of memory allowed per slot for your computer. Choose the following memory Upgrade for eMachines computer eMachines T5026.

   

  I am running Windows XP SP3 with RAM sticks of 256 MB (2) on an old eMachines T5026 desk top.  I added strips of RAM 1.0 GB (2) for the two slots open and computer would not start.  I tried with stick (1) 1 G and (2) 1 sticks and it still won't start.  I tried to mix and match the 256 with 1 G in each combimation, but it does not start.  Won't start with one or two sticks of 256.  Best Buy had PC3200 DDR RAM but the spec above States use PC2700.  Geek Squad says that PC3200 is OK instead of PC2700.  Is this the problem or I had to do something besides just insert new RAM?   Suggestions welcome.  Thank you.

  Thank you for confirming that. I still think that the above tips are relevant:

  Because what you bought doesn't work, my suggestion is to stay within the plug (PC2700), like this:

  http://www.crucial.com/store/listparts.aspx?model=T5026&cat=RAM

• Computer won't start; 3 long beeps, the fan turns

  Hello

  I have a desktop HP equipped of Windows Vista that does not start correctly.  When I turn it on it looks like it is starting, I hear the fan, the computer will beep 3 times in a row (I would say long beeps) then stops and beeps 3 times in a row again.  Then nothing on the monitor, fan always running.  If I didn't get anything I think that the computer and the monitor's energy-saving.

  Before I turn it on the screen says no signal so I think the screen itself works.  I don't quite see the HP splash screen.  Pressing F8 during startup seems to do nothing.

  I created Vista backup discs (food?), but I don't think they are bootable.  Some back story: a few weeks ago, I tried to download Windows Live.  After installing the updates, I could never Live DL and the next day I got the blue screen of death.  I rebooted, you press F8 repeatedly and Windows started normally.  Although it worked fine for a few days I felt nervous that I did a restore of the system around October 31.  Everything seems to be ok for over a week but now I have this problem.  I thought to upgrade to Windows 7, but do not know what to do at this point.  I've never opened a tour - answers Google talk out of ram or certain types of error of keyboard Bios (3270 keyboard card).

  Help, please!  Sorry to be so long.  :-)

  Hello

  These beeps mean hardware problems so check with a real computer (not the leeks and pics store
  at a Best Buy or other department stores) or HP support.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Sound beeps are error codes that describe a problem with your machine.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then refer here: If you can not start then check with the manufacturer of the system.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my computer won't start - missing or corrupt the isapnp.sys file

  original title: my computer does not start

  my computer does not start.  It has windows xp.  stupidly, I cleaned the keyboard when the computer was done.  After that, he went and couldn't boot more.  response on monitor: "windows has not start because the following file is missing or corrupt: system32\DRIVERS\isapnp.sys.»  You can repair this file by starting windows configured using the original set of CD-ROMs".

  What should I do?  I don't have the cd rom.  My documents have no back up.

  If you have the CD, use you it as a reference: http://support.microsoft.com/kb/315311

  How to get installed XP on your computer? What type/brand of computer do you have?

• computer won't start rest in game up to begins services then I get a pop up window: 'windows cannot complete installation in safe mode.

  I did a clean up to my acer with no CD, but now it never starts he gets stuck in starting the services and then a window opens stating windows can't install in safe mode. to continue installing windows, restart the computer, but I have tried in all modes of security different but nothing.

  can you help me

  Hello

  You try to perform the factory restore?

  We do not recommend factory restore, because by the factory restore, you will lose all the data present in the computer. Factory restore will restore your computer to factory settings.

  I suggest that disconnect you all external devices except the keyboard and mouse, and then restart the computer. Leave the computer to complete the process and do not touch anything until the process is complete.

  If this does not help, then it would be best to contact Acer to get help.

  Support from Acer: http://support.acer.com/us/en/default.aspx

  Hope the information is useful.

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Firefox hangs at startup: update / reinstall / profile wipe / purge addon has not set

  Hello

  As the subject says, my Firefox crashes now immediately at startup. (It's on Windows 10 64-bit.) Here is what I tried which did not fix the crash:
  -Refresh
  -Reinstall
  -Disable all addons
  -uninstall the software which provides plugins (Flash, Acrobat Reader)
  -delete the profile

  Here are the situations where Firefox goes not down:
  -safe mode
  -use every night instead of 40.0.3.

  This is one of the first reports of the crash from today (before I tried a ton of things):
  https://crash-stats.Mozilla.com/report/index/BP-50b4ac99-cc1f-4157-93cd-5ad192150920

  And here is one of the latter:
  https://crash-stats.Mozilla.com/report/index/BP-caf2ff15-3d5a-45ff-bc00-cd58b2150920

  Any help would be greatly appreciated. Thank you!

  Given that could start Firefox in Mode safe, you try to disable Firefox to use hardware acceleration?

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This takes effect the next time you exit Firefox and start it again. Any difference?

  Normally, I give the following advice, but for Windows 10 users, the problem can actually be that Firefox has not caught with driver to the latest updates. Your experience with nightly suggest that this is the case with your hardware. (But I'll list anyway...)

  Because hardware acceleration improves the appearance of fonts and animations, you can check the website of your computer manufacturer to see if the graphics card/chipset driver updates are available for your system. This article suggests ways sure to check: update your drivers graphics to use hardware acceleration and WebGL.

• Computer won't start not in after that installation of Windows update definition Update for Windows Defender KB915597.

  My computer launches startup repair and then a system restore. How can I fix it so it it keeps not happening?

  Hello

  1. what version of Windows is installed on the computer?

  2 do the Startup Repair and full system restore?

  3. that you get an error message when starting? If Yes, what is the exact error message?

  If you use Windows 7, follow these methods. If this isn't the case, please let us know what operating system is installed on the computer.

  Method 1:

  Use the last good known Configuration option and check if you are able to boot.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Method 2:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, please follow step 7 of article to reset your computer to normal startup.