Computer won't wake from sleep after installing the update July 2013

Original title: a reason any after July 2013 windows update mode "sleep" freeze my computer

Before I wake up problems due to incompatibility with windows 7 and SATA Hard drives (WD). This problem has been fixed with Windows Update August 2012.  Just recently after July 2013 Windows Update. After that my computer is in mode "sleep" for a certain time it freezes and will not restart until I press and hold the power button until the computer turns off. Then pressing the windows button star as a "Recovery Windows" message will appear.

I blame the July 2013 Windows Update. But I can't be sure what it causing the problem... I cleaned the Reg via CC & norton util 16 more run antiwalware Malwarebytes and run a Norton virus check. the lock in question remains.

Any ideas?

Problem solved... I had added a USB 3.0 Hub to my system. Unfortunately I do not share this Yauqb, thinking that a USB problem would not cause the fault that the USB (connected devices to the) worked well, my lack of this info likely extended the solution time.

Somehow that it finally dawned on me that look at the manufacturers site hub, of course nestled in the catacombs of the FAQ is a text of presentation all by unchecking the checkbox in the section of wake-up USB Device Manager.

When you look in Device Manager, USB devices are not the easiest to deal with because there are many multiple subdivisions more with no name and only cryptic blurbs attached when you look in the properties. Lucky a USB 3.0 arrives as 'High Speed' which reduces my 3-point action fields, uncheck all sleep problems fixed.

Tags: Windows

Similar Questions

  • VM won't boot from CD after installing the OS

    After installing the OS (Win2K) on my virtual machine, it will not be able to boot from the CD.  I don't know how to boot from the CD.  I need to run a repair on the BONE because when I originally created the virtual machine I have only the CPU to the attributes.  So, I assigned a second processor on the virtual machine, but I need to run the repair for the HAL for multi-cpu operation.

    How to configure the virtual machine to boot from the CD?

    Change the settings on the virtual machine and select it to go into the BIOS at the next startup and set the boot order for the CD before the hard drive

  • computer won't wake from sleep

    I have an ASUS pc. There is a computer week is spent in sleep mode and I couldn't wake up with my mouse or my keyboard (never had this problem before) also my Norton was gone. Re installed Norton eventually but problem still the same of the close turn off PC and re start everytime computer went to sleep, it's still in progress Please help

    Hi Graham,

    This problem can occur because of incorrect power settings or cause corrupted display settings.

    What is the model number of the computer?

    Method 1:
    I suggest you run the power Troubleshooter and check if it helps.


    Open the troubleshooter of power

    http://Windows.Microsoft.com/en-in/Windows7/open-the-power-Troubleshooter

    Method 2:
    If the problem persists, I suggest you to check that your device is allowed to the computer.

    a. click on start and type of keyboard in the box start the search

    b. then click on keyboard or the Microsoft keyboard in the programs list.

    c. click on the hardware tab, and then click Properties.

    d. click the Edit settings button
    Note: this step requires administrator access.

    e. click the power management tab and then check if allow this device to wake the computer is turned on.

    f. click OKand then click OK again.

    Method 3:
    If the problem persists, I suggest you install the latest form of the manufacturer's Web site display driver and check if it helps.

    Check out the link: http://support.asus.com/download/options.aspx?SLanguage=en

    Check out the link for more information.

    Sleep and extended: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • my computer would not wake from sleep when the cover iclose & open again?

    When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

    Hi George,.

    From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

    Let us, try to perform the following methods and check if it helps.

    Method 1: Run the troubleshooter of power

    Open the troubleshooter of power

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    For more information, connect to:

    http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

    Method 2: Troubleshoot wake the computer from sleep mode

    http://support.Microsoft.com/kb/266283

    Method 3: Update Chipset drivers

    Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

    Method 4: Run the BIOS update

    I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

  • I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

    When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

    Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

    The adobe reader program no longer exist in my C drive.

    I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

    Please help because my exams are in 5 days and all my study material must be opened with pdf!

    Thanks in advance.

    Hi, Fabien,

    Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

    Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

    Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

    Kind regards
    Rahul Tyagi

  • Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

    Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

    Message is about: Treo 700w (Verizon)

    A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

    Message is about: Treo 700wx (Verizon)

  • After installing the update of Lightroom CC (2015), it relies of empty previews?

    After installing the update of Lightroom CC (2015), standard previews become white as he build the images during the import. Existing previews are very good which were imported before. Reinstalled the previous version and everything nice work!

    Hi JohnKOTC,

    Please follow the steps below:

    1. Turn off apply tone auto under Lightroom preferences settings
    2. Restart Lightroom and then import images again.
  • PC HP ENVY 15 x 360: Notebook wake from sleep after upgrade Windows 10

    Upgrade to Windows 10 in late July-(I should have known mieux qu'àle niveau puisque j'ai eu un an pour le faire). -now computer laptop won't wake sleep withoout a button hard shutdown and reboot.

    Have followed the instructions on the HP keyboard activation Web site, allowing you to wake from sleep, bios update and to automatic updates for windows and HP.

    Please help, it's crazy to restart my laptop every time I walk away from it for awhile.

    Product number: G6T85UA #ABA
    BIOS:F.26-01/19/2015
    Keyboard Review: 89.23
    Total memory: 8.00 GB
    Name:Intel (R) processor Core i7-4510U CPU @ 2.00GHz

    Check out this post and see if it will apply/help to:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-to-resolve-post-Windows-10-upgrade-issues-on-HP-laptops/m-p/5209825/highlight/true#M309942

  • Switches to color when you restart the computer profile or wakes from sleep

    I bought a Dell Inspiron 1470 with Windows 7 at home as a backup of my MacBook Pro.  I used the Spyder2Express to calibrate my screen that works well.  After that I restarted my PC the color profile has been enabled for a few short seconds, but then returned to the default setting, which is horribly blue and too bright.

    I then removed the color profile created by my Spyder2Express and used Windows' built in the calibration of the monitor.  Yet once, it worked until I rebooted the computer, or he woke from sleep mode.

    I then wen to the control panel-->--> the color management advanced and assured the new profile is the default value of the system.  The problem still remained after the computer is restarted.

    The only solution I have found so far is if after I restarted my pc I go to Panel of--> of color management and select and clear the checkbox "use my settings for this device."  My profile will then return until I restart the next time.

    As a pro photographer, it is a question that is extremely disappointing.  I searched forums, web, called Dell directly and none of this was of no help.  Any thoughts?

    Hi Mike,.

    It seems that software Spyder2Express adds color profile after each reboot. We can check if really Spyder2Express is the origin of the problem

    Method 1:

    Uninstall Spyder 2 express and check if the return of the issue after each reboot.

    Method 2:

    Configure the computer to boot and then refine the boot entry that is causing the problem

    Step 1: Perform a clean boot:

    Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
    a. log in the computer using an account with administrator rights.
    b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
    c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    d. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
    e. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
    Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
    f. click OK and then click on restart.

    Step 2: Enable half the services

    a. click on the Services tab and then click to select the skin all the Microsoft services checkbox.
    b. Click to select half of the check boxes in the Service list.
    c. click OK and then click on restart.
     
    Solve the problem:
    After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

    Reset the computer to start as usual:
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    a. Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    On the general tab, click the Normal startup option, and then click OK.
    When you are prompted to restart the computer, click on restart.

    All the steps above to perform the clean boot is mentioned in the following article
    http://support.Microsoft.com/kb/929135

    Hope this helps,
    A Mir.

  • MacBook Air 2015 is stuck on the loading screen after installing the update.

    I installed the updates on my MacBook Air and when I restarted the loading bar would stay right in the middle. I used the disk utility in recovery 'first aid' my drive mode, it was fine. I tried to start in safe mode, but the loading bar cling just at the end I reset the PRAM, but nothing works. Help, please.

    * Loading Bar *.

    Reinstall El Capitan without erasing the drive

    Please make sure that you back up.

    1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
    2. Select disk utility, then click on the continue button.
    3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
    4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
    5. Quit disk utility and re-enter the Utility Menu.
    6. Select Reinstall OS X and click on the continue button.

    Also, see this tip for user: basic steps for the OS X upgrade.

  • Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

    I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

    This happened to someone else? Is it I can do it fix it?

    Hello

    Since you get such a serious mistake, I would use the free incident reports.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Problems with the Wi - Fi after installing the update of platform for Windows Vista (KB971644)

    SIGH... I installed the above for Vista windows update... as soon as the PC rebooted I was unable to get a wireless connection. I looked in the networks and connections in wireless and Wireless Manager is enabled. Im having to use the cable at the moment but very annoying sound... could you please help me? It also seems that things have slowed down? SIGH

    If anyone is still having this problem please post after try the following.
    Remove the update.  To do this, click Start > Control Panel > uninstall a program > (on the left side of the window), click on "View installed updates" and then select the update and uninstall.

    Then you can run Windows Update and then right-click on the update of the list and hide the update.

    Restart and then go to the website for the manufacturer of the adapter wireless to your PC and update the driver.

    After updating the driver and restarting the PC run Windows Update, select the hidden restore and KB971644 updates.
    Then, install the update and test.

    Let us know the results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After installing the updates, event viewer says "Some of the updates are not applicable for this system"

    I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

    Hi Simply4real,

    Check out the link below to a thread with similar problem and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

    After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

    I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

Maybe you are looking for

  • updated my mac pro early 2011 book now really running hot

    I wanted from the upgrade of my mac book pro early 2011 I7 quad core 8 G ram 2T HDD So I finally did. I like it, but now my mac runs hot 116 degrees. the fans are running. boot time has also more he takes more time. I used my mac pro for dj book I al

  • Hi apple, can you replace my iphone 6 again?

    Hi apple, can you replace my iPhone 6 again? Because my phone screen has been a little out of his cases and I think that my battery has become thicker, through my iphone still the limited apple warranty, how much it costs if repair? And or replacemen

  • Tecra M2: Format SD card

    Hello Does anyone know if there are size restrictions on the SD card that can be used with a laptop Tecra M2? I am currently using a 512 MB card but want to upgrade to a 2 GB card. Thank you very much

  • Speed by Satellite P100-400 SO-dimm?

    Hi, I would like to know what is the top speed of the so-dimm this laptop (Satellite P100-400) can handle? I want to add 2 GB of RAM, I currently have 1 GB DDR2 533 mhz and I saw this OCZ SoDimm 2 GB DD2 PC2-6400 800 Mhz memory, I would like t know i

  • If a disk was writable and rewritable, could it be a dvd rom drive or not?

    Does not say the compact disc player or anything like that. Please help, I want to play the Sims 3 so bad and it's a dvd - rom game.