Computers get tired?

Similar Questions

• Random BSOD and program crashes, getting tired of this.

  I've probably become crazy trying to solve this problem and as soon as I try to let Windows search for a solution to these problem it gives me this * damned * * * error telling me that the problem is not possible, ironically, and now I'm distraught about what I'm supposed to do. In recent days, my computer started sporadicaly bluescreen and games crashing became regular events at this stage, as well as my sound card to randomly crash, requiring a reboot.

  Cazral

  7 different causes in 12 accidents.  Pointing to the corruption of memory.  I FIRSTLY run Malwarebytes, then so clean run the other two tests

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.
  
  http://www.Malwarebytes.org/products
  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

  
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• I never get tired of him always asking me to remember passwords. Can I disable this?

  Whenever I go to a new site that has nothing to do with a password, Firefox asks me if I want what he remembered. It makes me click on 'not now' or 'never '. Y at - there a way to do not ask this question. I never want to remember a password on any site. Please advise me as to disabling. Thank you.

  You can disable the registration of passwords here:

  • Firefox > Preferences > Security: passwords: [] "Remember passwords for sites".
  • https://support.Mozilla.com/kb/remembering+passwords

• One of the computers on the local network Windows XP cannot access a http site.

  I ping to the alpha-numeric address (on this computer) and ping uses a private IP address: 198.168.88.68 (all packages are lost).

  All computers on the LAN access correctly.

  When I ping at the same alphanumeric address on other computers

  They ping 204.38.19.76 and I successfully received all return packages.

  I connect using my Internet provider ADSL router. I know it does NAT and all my LAN computers get their IP addresses dynamically.

  I thought it was a problem of Internet Explorer, but after I discovered the computer resolves the ip address for the external address as a private IP address. I force the PC to get another IP address and also I had used: ipconfig/release, ipconfig / renew. And even by configuring it with a static ip address does not work.

  Hello

  I can solve it only in this way https://www.region9.telcel.com/smartdistribuidores/

  This is a secure (via https) site. seems to be a subdomain of http://www.telcel.com.

  Maybe this can help, http://support.microsoft.com/kb/813444

  Otherwise, you should try to talk to http://www.telcel.com support

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I get my reactive XP product key?

  My pc can no longer go online and have removed the HD in external enclosure and installed Parallels on my Mac, but I can no longer use my product key XP to load the operating system on my Mac, can't get information because they do not allow my Mac to read any of it... have called the help line , but come to be brushed me off back here, I tried online Help Center but they just keep telling me to call phones help, what a load of garbage to get tired of the run around. Have important CAD to work on my XP, I need to get and finishing.

  Hi Murray Rowlands,

  I suggest to check the following items and check.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

   

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

   

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929/en-us

  Let us know if that helps.

• WRT160N: Getting dynamic IP address 169

  Hello!

  Linksys WRT160N, bought yesterday and I want it behaves same way did my Buffalo WHR-HP-G54. So I live in apartment building for students, and we don't have modems, just the RJ-45 ports in the wall. If I plug the cable directly from the wall of the network card in my computer, my computer receives the dynamic ip address from the ISP. With my Buffalo, I connected the ethernet to the WAN sa-port cable and changed the router in bridge mode. In this way, there was 4 other ports free for the other PC and of course wireless too much for the other PC. Each PC connected via the Buffalo had a dynamic ip address from ISP, up to five addresses, which is the limit of my ISP. I plugged the ethernet cable from the wall of WRT160N Internet port and disabled NAT, dynamic routing (RIP) and DHCP server on the router Linksys, so all my computers have addresses ip starting with 169. And when I plug the ethernet cable from the wall to a port other than Internet-port of Linksys, all computers get the correct IP addresses via a wireless cable. What is wrong, is at - it a setting I have not seen? Some setting that I can use Internet-port and have other 4 free ports for other devices and other devices can get dynamic IP from my ISP.

  Ignore the Scrooge. What he wrote has nothing to do with your problem.

  Unlike the Buffalo WHR the Linksys doesn't have a configuration option or switch to alternate between the 'bridge' and the router mode. The Linksys always uses the internet port on a different interface of the numbered ports. You can't fill.

  For example, if you want to 'bridge' with the Linksys is the configuration you already have when wiring from the outlet ports numbered, i.e. do not use the internet port. You will have to "give up" the internet port then. If you need more wired ports, you must connect a switch to the router.

• I have to start two times to get an internet connection through my ZyXEL_P-2602HWT-F1

  Hello
  I have W7 64 Pro SP1 and it worked well until I get a new modem ZyXEL_P-2602HWT-F1 from my internet provider. In almost the same time that I upgraded W7 SP1 so I don't know which is the cause of this problem I have. If I boot my computer for any reason, I don't get any internet connection. I have to start again.

  My other computers get internet connection immediately as above machine before these two changes.

  Please help me find out what's wrong because it's very irritating.

  PIKO

  Hello

  This looks like a problem of driver for me. I communicate with your access provider which you gave the new modem and ask them where the driver is available for download. I could find this model on the site of ZyXEL either.

• LAN network is working, wireless users isn't getting an IP address

  HY,

  I buy a CISCO 861W two days ago and I am trying to build my own wireless network at home but unfortunetly I do not get any IP address from the DHCP server via the wireless network. LAN my computers get IP addresses and I have an internet connection. The problem is when I go to wireless technology and I don't know what's wrong. I admit that I was not worked up to now with cisco wireless devices, I know how to build networks in the world connected Cisco. I have attached two configurations. Please, someone tell me where is the error. Thanks in advance.

  PS: I changed the dns and address wan with a few addresses randomly.

  Service contract number is the number of contract... If you know the serial number of the FRAME then you can call toll-free Cisco TAC toll free number and then to raise the case with us... Here is the link...

  http://www.Cisco.com/en/us/support/tsd_cisco_worldwide_contacts.html

  Concerning
  Surendra

• How can I stop says to get an online anti-virus program when I a?

  I continue to be told that I need to get an antivirus program to my computer through the center of the action on Windows 7.  I already have an antivirus with Avast.  I was wondering how I can get it to the Action Center to know that I have the antivirus on my computer.  I don't want to just tap skip to I want that it recognizes.  I tried to reinstall it but who still do not fix it.  If someone knows a way I would be grateful.  Just getting tired to be said to get an antivirus program since I do.

  I continue to be told that I need to get an antivirus program to my computer through the center of the action on Windows 7.  I already have an antivirus with Avast.

  Because Avast is not a Microsoft product, you should check the FAQ Avast or ask their help desk how to configure their antivirus so that it bodes well for Windows. Given that anyone can create a virus scanner, its their responsibility to make it compatible with Windows.

• How to install the recovery image on Satellite Pro A300?

  I have a Satellite Pro A300 and I need factory reset. I learned from my teacher of computers there is a unknown virus on this subject. Apparently, it has been downloaded when I downloaded Malware bites. I got the laptop free of Set - BC because I muscle Handi-trophy and get tired of writing.

  My teacher told me that I need to Factory Reset, but when I got the laptop, she had everything installed on, (kurzwell, Chrome, etc.) so I don't have the disc to factory reset. In addition, the virus has disabled everything that has anything to do with the internet, (Chrome, for example, Firefox, Outlook, malware bites, etc.).

  Y at - it all means I have factory reset the laptop without the need of the disc.
  Any suggestions will help.

  Thank you

  Hello Steve

  Portable, delivered without reinstall drive have recorded on the HARD drive recovery image and if you're still using an original preinstalled operating system you can try to install this recovery image according to the recovery procedure. How to this is described in the document s user manuals or you can do this following statement described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  It works for you?

• HP G61 511WM processor change?

  I have a HP G61 511WM.

  I'm looking to change my processor for portable computers such as in her shots of the moment. I want to know if it's possible and for

  upgrade and getting tired of things.

  So far, seems if they are in the same series, you can replace the processor to a better model. Which means that I would be able to replace my processor, as LONG as it is in a better version of my laptop. According to this article, I found, this guy did it and it worked, but his was a different model mine, just wanted to check with you guys to see if it will still be possible on my own.

  http://h30434.www3.HP.com/T5/notebook-hardware/G61-306NR-CPU-upgrade/TD-p/239906 http://h30434.www3.HP.com/T5/notebook-hardware/G61-306NR-CPU-upgrade/TD-p/239906

  Hello

  Here is the list of processors supported (page 1-1)

  http://h10032.www1.HP.com/CTG/manual/c01868653.PDF

  not much choice.

  Kind regards.

• What is Regedit and how it relates to the HP printing software?

  Regedit is a Windows program that allows you to edit the registry keys that control the PC. It contains a complete list of all the equipment of the system and information; and a single incorrect change here can completely break your computer forever.  It is strongly recommended that you contact a professional if you have been invited to go in this order.  Most often associated with Center HP solutions and other software that is not installed, you will see here in this post (step 26) when she suggests doing a complete scrub to remove all the files on a computer not HP HP. This is a real document that suggest going into the registry to solve an access denied Error Message.

  HP and its users of the forum are volunteers and highly skilled individuals who can give you the suggestion, but, so far, it was left to the HP printer customer curious to find the means to do so.  If this saves you the headaches and the possible destruction of your computer for me to publish this information so I'll do it, but keep in mind this isn't the place for beginners, and there are an infinite number of potential mistakes that can be made.  This is a very confusing place and all information about the deletion of the keys in order to find the set of features is left to the interpretation of the reader, leaving more room for error.

  1. How do not a mistake
  one) BACK UP THE REGISTRY before you begin.  Before editing the registry, it is recommended to create a restore point using System Restore.  You can also export the registry file in a new folder saved on your desktop where it is easily accessible. To export, open the registry editor by clicking the Start button, type regedit in the search bar, and you will see at the top of the list.  Click on regedit.exe and after it opens, select the file and then export it.  Save wherever you want, but the Office will be the best place to return to if you make a mistake.  I recommend calling something that is easy to remember and very obviously is named in the case where you need to pick it up later.

  (b) TAKE YOUR TIME.  Do not rush or try to clean the registry of everything related to HP if you have an HP computer, if you're not fully awake and aware, and if you are not sure of the source guide you.

  (c) If you have an HP computer, do NOT touch the registry.  There is no safe way to tell except KEEP OUT.  You are looking for something here, while with good intentions on research only the printer, you have problems.  A system restore and registry backup is not guaranteed to save 100% of the time.  Contact HP or find an alternative for what anyone, you need your HP printer to do.

  2. how to correct an error
  (a) you can click on the saved file that ends with an extension of registration file (.reg).  A window pops up that says "adding information can unintentionally change or delete values and make the components to stop working correctly.  If you do not trust the source of this information, do not add it to the registry.  "Are you sure you want to continue?" If you click YES you will see "the keys and the values contained in this place have been added successfully to the registry" if all goes well. Click OK and your changes will be restored.

  (b) this document from Microsoft gives instructions on how to do a system restore in XP and here is a link about the restoration of the system in Windows 7, as well as the frequently asked questions.  It is good to have several backup plans before committing to something that you don't know much.

  3. Why do I need to do this?
  (a) it is not only a problem with the HP software, but software in general tends to leave behind a mess in the registry, even after having made a simple uninstall.  This would be used CCleaner along the coast or other record cleaning software remove left on the keys that do nothing except that the installation programs.  The setup package search a specific folder and not the content it contains.  If it finds this empty folder during the installation, you will never get your beloved software on your computer, this center of HP, HP Printer Wizard or other facilities failed solutions.  Here's a reference any order posted by IBM regarding a failed BIOS installation.

  4. how to do this safely?
  The only way to do it safely is to hire a professional who has a lot of experience in this field and knows exactly what it is that he or she is looking and the case.  However, this option is not always available.  Do not perform these steps when in a hurry, a bad mood, tired, or after 5 hours of troubleshooting previous as this is when the user gets tired and errors often do.

  5. how to modify registry keys to HP?
  Like I said before, it is likely that the software has been working at any given time.  Sometimes uninstalling software on an unstable platform as an old PC can leave these files in the registry.  It's why I do a uninstall/reinstall of the software the last resort when you are troubleshooting because there is often a fix for the problem without having to uninstall something every time that the printer mess up. Here are the steps to search for these missing files and delete them:

  (a) once you have regedit open, drag the centerline on so that you can see all the names of files or open it in full screen.  Skip the first key called HKEY_CLASSES_ROOT.  You will not find what you are looking for here.

  (b) a click on the arrow to the left of HKEY_CURRENT _USER expands to show all files under it.  You must click on each arrow until you see a HP folder.  If you see one, right click and delete it.  You don't have to remove all individual keys under this main folder, but if it's a little one, you can see a bit of value to the wide to the right of this screen among other keys not HP.  Remove only that relating to your printer by right-clicking and selecting delete.  If you arrive at a software folder, you can delete the HP folder and the Hewlett-Packard folder.  REMEMBER THAT THIS APPLIES ONLY TO COMPUTERS, NOT HP.

  (c) continue this step at the bottom of the list, remove only the things that have to do with your printer and are obvious.  If in doubt, don't go out.  Follow along with your own progress is to close each file you have completed it.  Take your time.  If you are not comfortable here, so it's a clear sign, you need to call someone for help.  If so, try another method of registry cleaning, such as CCleaner and Advanced System Care until you can get the help you need.

  6. what should I do now?
  It is not necessary to restart the computer at this time.  If you look at options of analysis or trying to get your rear HP software, you will need to re - install the full feature software and drivers for your printer.  This isn't a post about how to fix your printer or its software, it is a message to warn users not only of the dangers to be found in this tool, but to guide you if you want to perform this step without professional assistance.  The last thing you want to do is break your computer in the process, but sometimes it is a mandatory step to fix but the information about this brand of printer isn't here so that everyone can find.  All I want to do is give the average user the information they need before doing something destructive and cannot back away from him.  Take your time and keep looking for other forums before you perform these steps on your own, especially if it's the first time, you have already been in this part of your computer.

  These steps are not sponsored by HP and are really based on my personal experience and knowledge of others. If you have any questions I will do my best to respond, but the main point of this post is to remind you, if you have any questions you can come back to another option.

• Home wireless network connections cut - a router issue?

  I have 2 PC:

  1 desktop running XP (SP3) on a H61DE/S3 Asrock mobo and Intel G620 2.6ghz CPU. RAM = 2 x 2 GB.
  2. laptop running Windows 7 + Intel i3 CPU
  3 wireless router D-Link DSL-2680 =
  The office is directly connected to the router via an ethernet cable wireless.
  I created a wireless network which consists of my office and cell phones with the help of a USB and the XP Wizard on my desk. I then clicked on "Network Setup Wizard" in the Control Panel on my desktop (XP) and created the network connections.
  When I boot-up the two machines, I can see and access the connections network of desktop and laptop.
  HOWEVER, if I let the machines for a while and then come back, although I can see the icon for "DESKTOP" in my network places on my laptop, when I click the icon, the cursor looks like this market, but then an error window appears stating that it cannot find the device and I want to diagnose the connection. When I click YES, sometimes, it detects the OFFICE and sometimes it doesn't.
  The same thing happens on the desktop when I click on the "PORTABLE computer" icon in "My Network places".
  The strange thing is, when I try to connect via Start Menu / run / \\'IP address on the laptop or desktop, I can connect usually either to the PC.
  The questions are
  1 can you explain why I should b affected by these connection question - is this a problem of compatibility between window7 and XP?
  2. what type of home network, maintained by the router or directly between the laptop and desktop computer without involving the router?
  Thank you

  I assume that the HOMEDESKTOP, in this case, XP is the master browser because it is physically connected to the router and it is this machine that I created the wireless network and local.

  N ° master of domain is chosen in an election.  All devices have an equal chance of being elected little matter how they are connected. (A domain controller can always win, but that's neither here nor there).  The problem here is that the Win 7 machine doesn't listen to the broadcasts and therefore think that it is the only device on the network and therefore chooses himself as master of go.  The XP machine is involved in a normal election except that the Win 7 machine does not participate because he is not listening.  They both choose and for a while, you have two masters to browse.  The only listening to computer (XP) finally gets tired of hearing machine Win7 and abandoned as a master browser.  Win 7 becomes the only browser then, but it does not work because he doesn't listen to any computer on the network.  You can check this by bringing a window prompt (start-> Run-> "cmd") and enter the command:
  nbtstat - a HOMEDESKTOP
  or
  nbtstat - a ROMANLAP1-PC
  If the targen computer thinks that he is a master of travel, you will see a line "__MSBROWSE__".

  For some reason, keeping the folders "My Documents" opened on both machines maintained the connection for 15 hours that day.

  Anyway that you can keep the active connection, the machines will partner with the other.  Once a connection is idling, then it must re-establish contact and is when the master browser or a response of diffusion is necessary and the Win 7 machine is unresponsive.

  Try following all the steps in the article according to which apply to your configuration:

  "Networking of computers running different Versions of Windows"
    <>http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows >

  I don't think there is a firewall in itself, but the way Windows 7 manages 'Home' vs networks 'Public' that can do behave like a firewall and cause problems with firewall-like. Article states that ' the network location is a setting that allows Windows to automatically adjust security and other settings according to the type of network to which the computer is connected. "  --they don't talk a firewall, but this is part of what makes a firewall...

  HTH,
  JW

• Windows 8 update won't load

  My computer Windows 8 acted as weird after I have updated to 8.1 that according to me. Windows Movie Maker does not recognize the files that it used to recognize. My Google Chrome acted a lot, just like my files. But the worst is that I can not reset my computer to factory settings to solve this problem. When I try to reset it to factory settings, it just says, "no changes."

  It is very frustrating and so now I have to see if my computer update will fix all this. My computer tells me that I am due for an update when I login, but when I go to

  Settings PC > Windows Update

  The Windows Update screen will load, load and load and I'll it let it charge for hours and hours, but it keeps loading. Never, he shows me the update I need. There is also no error code for the update because it won't load at all.

  It's frustrating because I don't understand why I can't reset my computer completely or update. I did the research for hours and hours to solve this problem and I became irratible trying to fix computers.

  I think that all this comes from the update and I can't fix it. I had a lot of people try and fix it, but usually, I'm able to fix computers or searching for the answer to fixing it, but not this time.

  If someone knows the solution to this problem, feel free to respond. I ended up getting tired of all these questions and I don't know what else to do.

  Thank you.

  Hi Kaitlyn,

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer? (So that I can help you find the device drivers on the site of computer manufacturer)

  2. what measures all troubleshooting have you tried?

  This problem might have occurred because of these reasons:
  1. lack of Windows updates.
  2. If the device drivers are not updated.
  3 corrupt system files.

  Before you start the troubleshooting steps allows you to download and install the latest device drivers for all devices in the computer manufacturer's website. Check if it helps. If the problem persists, try the steps listed here and see if it helps:

  Method 1:
  I suggest you to reset components Windows Update, which fixes corrupted Windows Update components and help you install Windows updates.
  

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  
  Method 2:
  If the problem persists, I suggest to start the computer in Mode safe mode with network and check if the problem persists or not. If the problem does not occur in Mode safe mode with networking, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode with network. In Safe Mode with networking starts with a minimal set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  
  

  Method 3:
  If the problem persists, you can run the audit and the auditor of file system (CFS) tool if this solves the problem. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• FCP slow?

  Is it possible that an old Mac running 6 FCP can only get tired and slow down? I have a G5 (10.4.11) running FCP 6.0.2.  I have more to use a more recent system now, but I keep it because it is the codec for a few sequences of BetaCam SP that I keep handy, among other things.  I use it mainly for audio work.  Last couple of months, it seems that it is sloooowwwwing down. Do a radio spot and when I hit the space bar to play instead, it stops, and think for a second, then plays very well.  He began to do this on a video production earlier, mostly on things of 1920 x 1080, but now it seems that it does on everything.  Any thoughts on what could be the cause and most importantly, how to fix?

  What is the status of your storage media? You must have fast disks with plenty of free space. Hard drives slow down as soon as you walk through more than 50% capacity.

  Have you tried to screw up your preferences?

  MtD