Computor stop communicating with the wireless printer

Similar Questions

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Printer Lexmark Pro 901 lose communication with the computer, print intermittently.

  Lexmark Pro 901 lose communication with the printer prints intermittently.  Disconnect, restart, or other ideas proposed by the help of Lexmark window do not work.  Computer's desktop HP with Windows 7 64 bit. Have seen other reports of similar problem.  Any suggestion would be appreciated.

  Hi André,.

  We understand that you are experiencing some problems with Windows 7 on your computer, but don't worry, we will try to help you.

  I suggest you follow the article below and check if it helps to solve this problem.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Do not hesitate to return if you need assistance with windows, we will be happy to help you.

• My brother mfc290c stopped communicating with my computer printer.

  My dominsion Dell 2400 has a problem that I managed to install the printer on another computer, tried 3 times to get the cd to run the program through but failed. I could never get that ability to fax printers implemented when I tried I got error message missing fxscfgwz.dll. What is the best way to find & install this file. Also any ideas on why I can't download the original cd installing printer brother mfc290c on my 1st computer? Help!

  Debbe,

  Please see comments from Ian Pugh and then stand out the answer of the "support engineer" as a 'response' - is not the solution to your problems.

  You seem to have a number of problems, but you have not provided all the information to diagnose them.  Please describe what is happening when you try to install the printer. Be as detailed as possible. If you receive error messages, enter them completely, without paraphrasing.

  That said the brother tech was wrong with your computer?  Usually, a technical support uses this kind of pointing the finger when they do not understand the problem.

  You say that you have installed the printer on another computer.  What version of Windows is installed on this computer?  What computer do you intend to keep the connected printer?  Do you intend to share the printer on a local network?

  Please, do the following in order to provide some basic information about your Dell 2400:

  • Click Start, then click Run, and then type msinfo32.exe in the "Open" box and click OK
  • After filled the system information window, click Edit > select all, then click on edit > copy
  • Then paste it (CTRL + V), the copied data in your response here

  What were you doing when you received the error message about fxscfgwz.dll?  Normally, this error can occur when you try to install Windows XP Fax Services - but you should not be done for a device like your brother MFC290c.  Only install you Windows XP Fax Services when you use a fax modem - and your MFC290c is a stand-alone fax machine, not a fax modem.  Part of the software included on the Brother CD-ROM allows you to send faxes from your computer, but it's totally separate from Windows XP Fax Services (I guess it is possible that Brother PC - Fax using some of the files that are normally used by Fax of XP, which is why I asked what you were doing when the error occurred; normally when a third-party software using a Windows file (the file is included in the installation of software package, even if it is 'supposed to be' already available on the computer).

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OfficeJet Pro 8600 Plus: PC stopped communicating with wireless Officejet Pro 8600 more

  My HP printer has been connected to my PC via my home wireless network and work without problem, for 18 months.  A few weeks ago the printer stop appearing in the printer dialog box when I went to print a document.  The printer continues to operate wireless for all my mobile devices without problem.

  I went through all the HP process and tools for troubleshooting, downloaded and installed all updates, nothing helps.  I uninstalled my PC off and now it will not reinstall.  The installation process see the printer on the network, but when I try to install it it said "cannot be installed on the network" and it goes no further. I lost hours and hours trying to get to the bottom of it, nothing helps.

  What is the problem?

  Hi @Layli,

  Welcome to the HP Forums!

  I noticed that your PC has stopped communicating with your HP Officejet Pro 8600 wireless connection more. I'm sorry to hear that, but happy to help!

  Out of curiosity, what happens if you install the printer using the USB method wireless configuration? Check out this guide, your wireless printerand select Configuration USB wireless.

  Also, if this does not work, able to install the printer are you using a USB connection? In this way, we can see if the problem could be the connection itself or not.

  You see error messages on the control panel of the printer at all?

  Thanks for posting and hope to hear from you soon!

• Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

  Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What version of Windows are you using?

  Try to follow the steps and check:

  Step 1:

  Visit the link following if you are using Windows 7.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If you are using Windows Vista, see the steps mentioned in the link.

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

  Try the steps from the link following if you are using Windows XP.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Step 2:

  Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Step 3:

  About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please feel free to respond if you have any other questions, we would be happy to help.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• Have a lexmark printer 5600-6600 which has stopped communicating with my computer

  updated my Dell to 2013 Office and Windows 7 - now I get the message that the computer is not communicating with the printer - if I uninstall printer and reinstall works for a day or as well as to get the same message again.  Have a of the entire hard drive wiped and had all reinstalled but am still having the same problem

  Hi JanicemGraham,

  -What is the exact full error message?

  This problem can be caused due to problems of driver or by a breakdown in communication between the printer and the computer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you to refer to the help article and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For your reference:

  I suggest you consult the information under "Troubleshooting"

  Lexmark 5600-6600 Series user's Guide

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/v7677571_en.PDF

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP5520 - an error occurred during communication with the scanner

  A HP5520 for a few months and all were working well. But today does not scan wireless.

  I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

  "HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

  If I try to connect through system preferences printers and Scanners it throws up to the following error:

  "Year error occurred while communicating with the analytical engine."

  Any ideas?

  Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Driver for kit compatible with windows wireless printing upgrade 7

  I just upgraded to windows 7 and I can't find a driver to install for my kit to upgrade to wireless printing.  Does anyone know if it is created?  I just bought the kit last year and I wouldn't go back to bring my laptop to the floor whenever I need to print.

  Hi @ll,

  I just created a work around to install the driver correctly on a Windows 7 computer, did these steps on two machines and it works perfectly.

  Just follow the following steps. Unfortunately I can't attach files here that I had created an Office document with screenshots to make it easier to follow. If you want that the document, please send me a note to send you it.

  In order to install the HP Wireless Printing Upgrade Kit Windows 7 follow these steps.

  1. download and install the HP Wireless Printing Upgrade software/base drivers (bought with the Windows Vista operating system computer)

  2. when installation reached 90 percent on the bar top and 10% to the bar downstairs it crashes.

  3. don't panic.

  4. right mouse click on the task bar and start the Task Manager.

  5. Select the wireless printing upgrade kit in the Applications tab and right mouse click and select go to process.

  6. stop the process called Setupwizard.exe

  7. you will get a pop up, indicating that the program probably was not properly installed and that you have two choices to select in what follows: Reinstall with the recommended settings and this program is correctly installed.

  8. choose to reinstall the program and Windows 7 appears the application for leave.

  9. after leaving, the installation files will be extracted again.

  10. you will see the Welcome screen once again.

  11. click on install, select I accept, Next.

  12. He'll find your adapter printer showing the connected device.

  13. click Next and the installation continues.

  14 at the end of the installation an HTML page is launched, saying: you need to install the printer software before you can use your printer.

  15. once all right mouse click on the connection in the task bar Manager, select Connect and Plug and Play will install the printer driver as if the printer is connected directly to the PC.

  If the P & P does not find the driver, or strike not in you can try with Windows Update, if the driver is there, it will be installed, otherwise use the CD, you might have.

  16 start, for example, Microsoft Office Word 2007 and to send a print job in the drop-down menu, you can select the printer that was installed.

  17 scanning also works that I used Microsoft Office Document Imaging to scan from the PSC 2210.