Concerned about data security when the iphone is lost

My friend had lost his iphone and has implemented "Find my iphone" before it happened. There was therefore nothing to fear in what concerns the security of data that was on the lost iphone.

I recently bought a new iphone so I decided to play and experiment. I erased my old iphone via 'Find my iPhone' in icloud. As soon as I turned on the old iphone, everything was erased. What a relief! Then I plugged this same old iphone on your desktop with a recovery of iphone software and all my photos and contacts, etc. have been recovered! Now, I question the safety of this function - it is not a foolproof method to ensure the security of our data when lost or stolen phones is that?

Lock activation and to locate my phone are perfect security mechanisms. Period. None have access to your device if locking activation is enabled. iPhone becomes a useless brick for the flight or the person who steals / finds your device.

https://support.Apple.com/en-us/HT201472

Tags: iPhone

Similar Questions

  • Hello, do someone knows if the App Skycure is interesting to use for the security of the iPhone?

    The pp Skycure is interesting to use for the security of the iPhone?

    I doubt it. You need some protection when the computer opened and then install and use a VPN. SaturnVPN is effective and inexpensive.

  • Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

    While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

    If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

    Best regards

    Q

    Hello

    It may help to place your watch in mode do not disturb before driving:

    -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

    You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

    -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

    To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

    https://www.Apple.com/feedback/watch.html

    (This is a supportive community focused on user - you don't talk to Apple here).

  • How to know when the iphone was made.

    I was wondering if you know when the iphone was made because my iphone 5's battery keeps dying pretty quickly

    and online on Apple.com it says that some iphone 5 s batteries would be replaced because of defective made batteries.

    Thank you

    The battery replacement program is for iPhone 5, iPhone 5 s no

    https://www.Apple.com/support/iPhone5-battery/

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • which method is called when the screen has lost focus but stays on blackberry?

    Hello

    I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

    For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

    Please, help me please please

    Override the following methods in your class to screen according to your needs

    1. when the screen button to the stack

    Call

    onDisplay() or

    onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

    2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

    call

    onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

    3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

    call

    onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

    & call

    onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

  • Verizon computed using data differently than the iPhone 6 Plus

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Ocean 17A writes:

    Verizon seems to count on me by using more data than my iPhone 6 more fact.

    My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

    Nobody noticed this discrepancy?

    I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

    I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

    Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

    Your opinion?

    Everything you said Verizon is false. The iPhone saves all data sent over the cellular network. There are some data types that will always pass by cell phone:

    • Visual Voicemail
    • MMS messages
    • Push email notifications
    • All data that is transferred when the phone is asleep and not trendy, WiFi is disabled when the phone is in sleep mode to save battery

    Verizon numbers and phone numbers may be different for an entirely different reason. Records of phone as sent or received data, but do not count data that fails to send and which must be retransmitted. Verizon has this data. This happens usually if you have a very low cell signal.

    My experience with AT & T, is that their number and phone match almost exactly.

  • How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

    How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

    I came across this problem recently and had to talk to Apple

    If you mean the computer name listed in the settings - iTunes WiFi - Sync

    Then, it's exactly what I'm talking about

    I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

    Lost among others

    All my WiFi passwords

    All of my alarms

    All my preferences of location services

    BUT he did remove the old name of the computer from there

  • Can not see incoming calls when the iPhone is locked

    When my iPhone is blocked I don't see if there are messages or incoming calls. It isn't anything like that before.

    Thank you

    check the tools on your phone

  • My iPhone 7 will not connect to the Bluetooth in my car when the iPhone 5 only

    MY iPhone 7 does not connect via Bluetooth to my car so that I can use the phone hands free when my iPhone 5 only

    Bluetooth can be exceeded in your car, which would explain why an iPhone 5 still works.

    You can test the Bluetooth on your iPhone 7 with something else, such as headphones or speakers?

  • Percentage of battery is not when the IPhone works on a charge

    Hello world

    I am new to Apple as a client so still getting used to the phone and it's features.

    I recently bought the Iphone 6 s more and I noticed that when I charge it and it is turned off or turned off it does not show the battery charge or how much the battery has charged as in an Android phone or when you turn off your phone and charge the battery sign appears showing the percentage that the battery is charged.

    P.S I know the battery percentage look something available that only works when the phone is turned on as in when the phone is turned on.

    Would appreciate an insight as to if IPhones as a thumbrule will not display the percentage of battery charge when it is turned off and charged or should I worry?

    Thanks in advance

    Kat (> "o" <)

    If you're in charge, click on the wake up/sleep/power on button to see the percentage below the time.

    You can also turn on

    Settings > Batteries > battery percentage to see the percentage in the upper part of the right status bar.

  • How do I save information when the iPhone is locked

    I have a lot of very important information inside my iPhone, but the iPhone is locked due to loss of password. Urgent waiting for professional response.

    Thank you very much!!!

    It is impossible to access the data on an iPhone locked if you do not know the password. If you have been back up you can restore the phone again and then can restore the most recent backup.

  • Unable to receive calls from Apple Watch, using WIFI AT &amp; T calls, when the iPhone is turned on, turned off or in Airplane Mode.

    I work on this issue and wanted to involve the community.

    I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

    I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

    Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

    I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

    http://help.Apple.com/watch/#/apd0443fb403

    If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

    • Send and receive digital messages Touch
    • Send and receive messages using Messages
    • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
    • Check current weather conditions
    • Track your inventory

    http://help.Apple.com/watch/#/apd2fe746e86

    Make calls via Wi - Fi

    If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

    To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

    Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

    Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

    Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

    Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

    AspiringAppleGuru wrote:

    I have... to connect to the 5 GHz on my... router bandwidth.

    Hello

    These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

    If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

    More information:

    On Bluetooth and Wi - Fi on Apple Watch - Apple Support

    Use Apple Watch without her sister iPhone - Apple Support

  • Photos app begins when the iPhone plugged into iMac?

    Whenever I connect my iPhone to my iMac the Photos app starts.

    Is there some setting somewhere to prevent this?

    Thank you

    -Mike

    P.S. I use the latest operating systems on all my devices (El Capitan and iOS). I looked in the settings in the Photos on my iMac, my iPhone, iTunes, etc. but have not yet seen anything to change this behavior. I guess I just missed it somewhere.

    Fix the iPhone. When photo is open, select iPhone in the sidebar and uncheck the box at the top.

  • Automatically open iTunes when the iPhone is connected

    At the same time when I connected my iPhone to my computer it opened iTunes automatically. Now he doesn't. Is there a setting I need to adjust or it can be done manually now?

    Thank you

    Bob

    Check the iTunes summary page when your iPhone is connected to iTunes. Make sure that the synchronize option automatically is selected under 'options '.

Maybe you are looking for

  • Norton Ghost crushes on Satellite Pro A100

    Good afternoon everyone, I'm having a problem with a few laptops I have here. I just got a few Satellite Pro A100 but I have problems with making an image of the HARD disk. I tried Norton Ghost and a few other programs that can back up a disk to an i

  • 1500 HP: HP network check Helper - what happens if I do not use Internet Explorer

    This add-on it's an update of Internet Explorer for the detection of problems of internet connection, the tools to resolve these. Preferring as I do not use Internet Explorer, Chrome and Firefox, can I guess that I don't need to bother with this?

  • Create an executable version for eurotherm driver tools

    Hello I would like to know if anyone has or can create an executable version from the instrument to the eurotherm 3216 vi driver monitoring temperature control. I downloaded the file from the Web site or http://sine.ni.com/apps/utf8/niid_web_display.

  • Configure a message to logon to the domain users

    Hello I installed a domain environment & user are properly login into that. but I want to configure different message to logon for users in my area I mean I want to send users information related to that particular user separately automatically when

  • converting char to int

    Hello How to convert char to int? Thanks in advance