Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

Similar Questions

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and still have not been able t

  Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and not yet able to get past the basics make me very frustrated.

  I guess you meant the links when you open photoshop CC. I tested all four videos of the 23 min tutorial and they all played fine. If something between you and adobe does not work correctly.

  • Check that your firewall is blocking the net. Try to access youtube videos and see if they play very well
  • Go to the adobe tv site and try to play one of the videos here. Adobe TV
  • If youtube plays very well and adobe tv does not work, next is to check if you have flash installed. Some videos require flash, others are html 5. Sorry that I could not confirm what player has been used for this tutorial. I think that html 5 but not sure.
  • Next is to look at the properties of your browser and check multimedia settings are not disabled if it y in a. (this is totally dependent on the browser)

  If none of this helps, let us know.

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• Create reports on the Complutense University of MADRID

  Hi, I have a question to create reports in content WebCenter. I see in WebCenter content: Records that some reports in the search results. I used URM adapter to integrate the University Complutense of MADRID and URM, but the same option create reports is not display in search results Complutense University of MADRID. The question is, is it possible to create reports on the AAU that I in URM?

  Like this: https://blogs.oracle.com/kyle/entry/creating_custom_report_templates_with

  Hello

  I used URM adapter to integrate the University Complutense of MADRID and URM, but the same option create reports is not display in search results Complutense University of MADRID.

  Are you that referring on the server of the University Complutense of Madrid which has the card activated the reports option does not appear?

  I think that the report templates are not installed / released into the system, it is the most common reason for the option to not appear. Try the steps here.

  Go to folders-> configure--> installation check list, and then click default installation of models (even though it says ok/made) and then check out. So again, which does not contain the Menu item, go through the following steps

  Try these steps;

  -----------------------------

  1. review the following documentation: Release Notes Oracle® Fusion Middleware 11 g Release 1 (11.1.1) for Linux x 86-64. Here is the link:

  http://docs.oracle.com/cd/E23943_01/doc.1111/e14770/ucm.htm#ASRLA4867. http://docs.Oracle.com/CD/E23943_01/doc.1111/e14770/UCM.htm#ASRLA4867

  2. navigate in the section document 38.1.20 manual addition of xdoruntime.ear library of records management.

  3. to consider and implement the steps described in section above.

  4. confirm that the report templates are released by checking the queue of work in PROGRESS. If report models are stuck in WIP due the State GENWWW, please fix the problem with the infectious rhinotraecheitis BOVINE/indexer and resubmit the report templates.

  5. new test problem.

• Delete data indexed all the Oracle SES data or indexed from a given source (Complutense University of MADRID, Discussion Board)

  Hello

  We have configured ITS Oracle 11.2.2.2 with Oracle Webcenter 11.1.1.8 and Complutense University of MADRID.

  We are able to index all data successfully.

  For some test case, I would like to remove all indexed data / indexed data from a particular source of backend and rerun the crawlers.

  Y at - it no SP is who can do the job or any table that I can serve to achieve this?

  Thank you

  Kind regards

  SID

  Hello Siddharth

  I would like to understand why you do not want to delete some items analyzed

  A full analysis will remove existing items and fill the backend with the latest

  In addition, items are visible by their security; so not need something stopping to get indexed

  ~ Theodor

• List of options at the Complutense University of MADRID

  We are facing a question in 11.8 Complutense University of MADRID, where we defined the metadata with the list of options.

  One of the values from the list of options is to have 52 characters.

  But it is giving error 'exceeds the maximum length.

  Help, please.

  According to me, here is the solution below:

  (1) If you manually set the list of metadata options that is difficult to encode the value in ValuesList, then you will get this error

  "The value of the option list exceeds the maximum length of 50.

  It is the expected behavior.

  Workaround solution:

  If you go to the schema of the OCS, you will find a 'OptionList' table, there column called "adoption".

  Now, the size of this column is defined as 50.

  By changing this, you'll be able to set the value of the option list with over 50.

  NOTE: this is not the way supported, as in the future if certain patch applied set he returned it to 50.

  (2) alternative workaround that is supported in a way, is by using the views and allowing the value of option list to be filled by point of view.

  Please let me know in case of any problem.

  Thank you

  Ranjan

• Search by program go to the Complutense University of MADRID

  Hello

  I have a requirement to search for a file using RIDC, Complutense University of MADRID

  I am the scene below the steps.

  public UCMFile getDocumentByFileName (String fileName, String folderPath, user String) {}

  StringBuilder builder = new StringBuilder();

  Builder.Append ("xCollectionID = '202819957016000405'" + "< AND > dOriginalName = '" + fileName + "'");

  String query = builder.toString ();

  List of files < UCMFile > = this.getDocumentsByQuery (user, query);

  }

  private list < UCMFile > getDocumentsByQuery (String user, String query) {}

  String methodName = Thread.currentThread () .getStackTrace () [1] .getMethodName ();

  If (_logger.isLoggable (Level.INFO)) {}

  _logger.info ("class: [" + This.GetClass + "] [" + methodName + "]" + "entry: user:" + user);

  }

  try {}

  init (User);

  DataBinder dataBinder = myIdcClient.createBinder ();

  dataBinder.putLocal ("IdcService", "GET_SEARCH_RESULTS");

  dataBinder.putLocal ("QueryText", query);

  ServiceResponse response;

  DataBinder serverBinder = null;

  List files from list < UCMFile > = new ArrayList < UCMFile > ();

  response = myIdcClient.sendRequest (userContext, dataBinder);

  serverBinder = response.getResponseAsBinder ();

  ResultSet DataResultSet = serverBinder.getResultSet ("SearchResults");

  System.out.println ("size-" + ResultSet.getRows (). Size());

  int index = 0;

  If (resultSet! = null) {}

  UCMFile ucmFile = null;

  {for (DataObject dataObject1: {resultSet.getRows ())}

  If (index > = 5)

  break;

  String docName = dataObject1.get ("dDocName");

  ucmFile = new UCMFile();

  ucmFile.setDocumentId (dataObject1.get ("dID"));

  ucmFile.setContentID (docName);

  ucmFile.setDatasource ("#dDocName UCM:" +)

  dataObject1.get ("dDocName"));

  ucmFile.setDescription (dataObject1.get ("xComments"));

  ucmFile.setUrl (url);

  ucmFile.setTitle (dataObject1.get ("dDocTitle"));

  ucmFile.setUploadDate (dataObject1.get ("dInDate"));

  ucmFile.setAuthor (dataObject1.get ("dDocAuthor"));

  ucmFile.setExt (dataObject1.get ("venture"));

  fileList.add (ucmFile);

  index ++;

  }

  }

  If (_logger.isLoggable (Level.INFO)) {}

  _logger.info ("class: [" + This.GetClass + "] [" + methodName + "]" + "Exiting: list of files:" + fileList);

  }

  Return to the file list;

  } catch (Exception e) {}

  DiagnosticUtil.printStackTrace (e, _logger, this. GetClass, methodName);

  throw the new locale ("an unexpected error occurred while getting recently downloaded documents. Contact the system administrator. \n details: «+»

  e.getCause ());

  throw the new locale ("an unexpected error occurred during execution of the UCM query". Contact the system administrator. \n details: "+ e.getMessage ());

  }

  }

  Without dOriginalName his works fine but with dOriginalName I get following error

  Services/3 09.03 01:37:01.813 IdcServer-20882! csUserEventMessage, ohsadmin, CIS! $ intradoc.common.ServiceException:! csSearchUnableToReturnResults

  Services/3 09.03 20882-IdcServer 01:37:01.813 * ScriptStack GET_SEARCH_RESULTS

  Services/3 09.03 01:37:01.813 3:getSearchResults IdcServer-20882, * no captured values *.

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchManager.retrieveSearchInfoAsBinder(SearchManager.java:295)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1902)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.doLocalSearch(SearchService.java:1381)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.getSearchResults(SearchService.java:674)

  Services/3 09.03 IdcServer-20882 01:37:01.813 at sun.reflect.GeneratedMethodAccessor279.invoke (unknown Source)

  Services/3 09.03 01:37:01.813 IdcServer-20882 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to java.lang.reflect.Method.invoke(Method.java:597)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doCodeEx(Service.java:620)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doCode(Service.java:575)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doAction(Service.java:547)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doActions(Service.java:542)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.executeActions(Service.java:528)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doRequest(Service.java:1956)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceManager.processCommand(ServiceManager.java:437)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  > requestaudit/6 09.03 01:37:01.984 GET_SEARCH_RESULTS IdcServer-20882 [dUser = ohsadmin] [QueryText = (xCollectionID = 202819957016000405 AND dOriginalName = Details711.txt Testing)] [StatusCode =-1] [StatusMessage = failed to retrieve search results. Error occurred during processing. Unable to return results.] [IsJava = 1] 0.7068729996681213 (dry)

  > requestaudit/6 09.03 01:38:00.001 Audit Request Monitor! csMonitorTotalRequests, 10, 1, 0.08333263546228409, 0.8702999949455261, 1

  Looks like I can't search based on dOriginalName. I need to check if there is that a document already exists with the same file name in a folder.

  How should I reach it?

  Thank you

  Pauline.

  Hello

  In my view, the format of the query string is false.

  The correct format would be-

  dOriginalName ' *'

  
  

  
  

  Here equal (=) will not work. In my case code works very well.

  
  

  Check with this format and let me know the results.
  

  
  

  Kind regards

  Hoque

• Question on the alias in the Complutense University of MADRID

  Hello

  I am currently in the process of brainstorming of ideas that would help streamline the e-mail notifications by using the cmdlet workflow management and wonder if there are best practices following help put me in the process.

  In essence, I want to do, it's associate a security group at the University Complutense of MADRID to groups of users by using aliases and tokens. My implementation involved naming aliases similar to security groups and have a token to decide which group to choose. It worked well, but I got to thinking that there may be a way to streamline this process, so when a user creates a new field in LDAP, an alias can be created that is associated with members of the cname. Is it possible to embed aliases in Complutense University of MADRID with members of a specific LDAP cname? Are there other processes that can do what I'm doing?

  Thank you for your time.

  Hello

  Of course, it is possible, but with some customization. There are two options for you.

  Option 1: Conduit in the Complutense University of MADRID

  1. do you have a personalized search LDAP for users who belong to a cname using JNDI calls (regular service)

  2 look for this information in a result set and use it as input for the creation of the alias of the Complutense University of MADRID with this set of users

  Note: Users should be connected to the AAU at least once to have his updated profile cached in the Complutense University of MADRID

  Option 2: Led outdoor AAU

  1. do you have a program of independent Java at the request of the LDAP query for the new groups/areas created (new JNDI)

  2 do you calls of CRMI to AAU to create aliases with the users information from LDAP

  I hope this helps.

  Kind regards

  -Anand

• user autherization at the Complutense University of MADRID.

  Hi all
  
  Please, help me to understand next.
  -> 11 g authentication is carried out thorugh Admin Server.
  -> When we configure a new provider and reorganization of albums, autherization user takes plase from there only.
  -> we need create a ldapProvider at the University Complutense of MADRID after you have created the new Admin Server provider.
  -> what is the purpose of jpsUserProvider in above senerio.
  -> for built-in ldap users mapped to the role/account r group.
  -> should we create role account with the same name at the University Complutense of MADRID also?
  
  These are the fundamental issues that I'm not able to understand in the oracle documentation.
  
  any help is much appreciated. (Please provide a few entries, I hv been through security oracle docs section in the Administrator's guide)
  Thank you
  -Yves

  Hello

  --> 11 g authentication is performed Server Admin thorugh.

  WLS is the central Security Manager where the authenticator of security provider like authenticator by default (for Embedded LDAP), OIDAUthenticator (for the OID), ADAUthenticator (for AD) etc. are created when any external identity store must be used for the AAU.

  --> When configure us a new provider and reorganize top autherization user takes plase from there only.

  That is right. It is one of the steps that must be accomplished where configure WLS security providers. With PS5, we can have several providers authentication and using her virtualize indicator = true in the security xml file, users can be authenticated from these multiple sources.

  --> do we need to create ldapProvider at the Complutense University of MADRID after you have created the new Admin Server provider.

  No.. It is supported to WLS.

  --> What is use of jpsUserProvider in high senerio.

  Read / available to users at the AAU of WLS.

  --> for ldap integrated users mapped to the role/account r group.

  For all groups of cases LDAP / AD are mapped as the roles at the Complutense University of MADRID.

  -> do we need create the role account with the same name in the UCM too?

  No.. You can use the credentials to map the LDAP group / accounts to the roles of the UCM / accounts.

  I hope this helps.

  Thank you
  Srinath

• where is Folders_g at the Complutense University of MADRID?

  I am following the Tutorial, http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10273/createconnect.htm#BGBDDHAA
  I encountered an error when connecting to UCM11g of JDev11.1.1.6
  
  It is said, "SEVERE: could not the content list of the folder with the ID = dCollectionID:-1.
  
  someone in the RTO said I activated the "Folders_g" at the Complutense University of MADRID (under Administration - Admin Server - Component Manager). but I can not find "FrameworkFolders". and enable "FrameworkFolders" doesnot work for me.
  where can I find the Folders_g? Thank you.

  -First, disable the framework files and restart the managed server. Framework and Foldersg files cannot be installed at the same time. _
  -On the page where you have enabled frame files, upwards (in the body of the page), it has a link to "Manager of advanced components." Click on this link.
  -Scroll down to the section "disabled components."
  -Select "Folders_g" and press the button "Activate" in the list of the disabled components.
  -Restart the managed server.

• How to get around the process of authentication of the Complutense University of MADRID

  Hi all
  
  I use Oracle Content Server and I need to get the file directly so I can attach my mail application. However, I am able to get the native file using this URL:
  
  
  http://localhost:16200/cs/idcplg? IdcService = GET_FILE & dID = 29401 & dDocName = IPM_029601 & allowInterrupt = 1
  
  But as soon as I click on that URL, it shows me the Login Page and after you submit the user name and password, it gives me the file to save to my local computer.
  I need to bypass the authentication page, and I need this file directly to save on my local computer.
  Is there a method that I can implement to pass the credentials as hardcoded or is it possible to pass the credentials in the url GET_FILE above.
  
  Please suggest!
  Urgent!
  
  Thank you...

  Taken the lead here: service GET_FILE p does not accept user and password settings. He worked while authentication has been cached in the browser.

  If you can handle protocols SOAP & WSDL side client (Visual Basic or Java), then there is the solution to get the file from the Complutense University of MADRID with a proper authentication. It is a GetFile.wsdl to start.

  http://download.Oracle.com/docs/CD/E17904_01/doc.1111/e10807/a01_wsdl_and_soap.htm

  and 10gR 3 manual with even better examples:

  http://download.Oracle.com/docs/CD/E10316_01/CS/cs_doc_10/documentation/addons/soap_wsdl_10en.PDF

  Kind regards
  Boris

• Installation of the Complutense University of MADRID - need your help very badly - please help

  omg!!!!!!!!!!!!!! I had a moment difficult installing oracle UCM in my system...
  I managed to get the homepage but wen I click on a link, it says
  
  "The/idc3/idcplg requested URL was not found on this server."
  
  My induction is that iam not configure my cgi properly Setup in apache...
  
  Here are the necessary info:
  
  OS: WIndows 7
  Web server: apache 2.2
  
  Please find my file config apache below: (httd.conf)
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot value "(x 86) C:/Program Files/Apache Software Foundation/Apache2.» 2' will be interpreted by the
  # Server as "(x 86) C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.» 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen to 90
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin [email protected]
  
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName bhuramish - HP.vc.shawcable .net: 80
  
  #
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  #DocumentRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs.
  DocumentRoot "C:/Oracle/ucm/server3/weblayout.
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  # < directory "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs" >
  < directory "C:/Oracle/ucm/server3/weblayout" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule /idc3 >
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http://bhuramish-HP.vc.shawcable.net/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  LoadModule IdcApacheAuth C:/Oracle/ucm/server3/shared/os/win32/lib/IdcApache22Auth.dll
  IdcUserDB idc 'C:/Oracle/ucm/server3/data/users/userdb.txt '.
  Alias /idc3 C:/Oracle/ucm/server3/weblayout
  < /idc3 location >
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / location >
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias /idcplg/ "C:/Oracle/ucm/server3/weblayout / '.
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:\Oracle\ucm\server3\weblayout" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 http://bhuramish-HP.VC.shawcable.NET/subscription_info.html
  #
  
  #
  # MaxRanges: Number of channels in a Maximum request before
  # return the resource, or 0 for unlimited
  # Default is to accept 200 lines
  #MaxRanges 0
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  My CONFIG.cfg file:
  
  <? jcharset cfg = "UTF8"? >
  Server #Content System Properties
  IDC_Name = idc3
  IdcProductName = idccs
  SystemLocale = English-United States
  InstanceMenuLabel = idc3
  InstanceDescription = idc3 content server
  SocketHostAddressSecurityFilter = 127.0.0.1
  
  Variable #Database
  IsJdbc = true
  JdbcDriver = net .sourceforge .jtds .jdbc .driver
  JdbcConnectionString = jdbc:jtds:sqlserver://bhuramish-HP:1433 / OracleECM
  JdbcUser = ecm
  JdbcPassword = VZU64a2zvfxn4H/vxFslVk0wdHELfmeJ4z + xMB5g4Rw =
  JdbcPasswordEncoding = Intradoc
  
  Variable #Internet
  HttpServerAddress = bhuramish - HP: 90
  Mail = mail server
  SysAdminAddress=sysadmin@mail
  HttpRelativeWebRoot = / idc3.
  CgiFileName = idcplg
  UseSSL =
  WebProxyAdminServer = true
  
  #General option Variables
  
  Variable #Additional
  DatabaseType = mssql
  JAVA_CLASSPATH_customjdbc=$SharedDir/classes/jTDS-1.2.4.jar
  SearchIndexerEngineName = DATABASE. METADATA
  Server web apache =
  IdcAdminServerPort = 2220
  IntradocServerPort = 2222
  
  Please help me on this... I worked in stellent IBPM 7.6 sp2 in a large cpompany and never had the opportunity to work on Setup frm scrach...
  
  See you soon
  Vivek
  
  Published by: 887781 on September 27, 2011 19:10

  Hello

  instance of #ucm10g

  LoadModule IdcApacheAuth IdcApache22Auth.dll
  Idc3 IdcUserDB '/data/users/userdb.txt '.

  /Idc3 alias "/weblayout".
  
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  

  This is how apache entries must be.

  Make the changes as above, and then restart Apache, Complutense University of Madrid.

  Test to see if the problem still persists.

  Thank you
  Srinath

• Any model of user interface to display the banner from the content of the Complutense University of MADRID

  Hello
  There is a requirement to indicate the type of banner of the portal in the webcenter spaces, where it should display html content one after another since the press kit of the Complutense University of MADRID. The banner should Flash each content for a while and repeat the cycle. Access to the content can be easily controlled by the security of the University Complutense of MADRID, so that each user sees a different content in the banner. Is there a Webcenter UI model or example to achieve this usecase? Any thoughts on how to build this banner in webcenter spaces 11g ps3? something like http://www.npower.com/Home/index.htm (see banner in the Middle - but the content should be different pages)
  
  Concerning
  Prasath.C
  
  Published by: Fabien C April 30, 2011 15:49

  I don't know if you can do it with flash, but it might be possible. If you really want to use the flash, I advice allows you to use the REST API to query the content to the correct content server or use the AAU regular services for web content.
  If you really want to use flash, but I just want to have the feature of changing the content of a banner once every few seconds, you can also use JQuery in combination with the content presenter. You must write your own template to the content Distributor and use JQuery or some JS framework to make things. In my view, it should also be possible without JQuery, but I have not tried...