Configfree using bluetooth devices with external?

I have a satellite M30 and I used a TDK Bluetooth PC Card. I love the software Configfree came with the laptop and noticed that it can detect the Bluetooth connections and wi - fi, but it works with pre-installed bluetooth devices. Is there anyway that you configure to use the bluetooth PC card device?

Hello

Sorry, as far as I know it is not possible using ConfigFree with a 3rd party Bluetooth card! You can not install it I the tool so that it is not detected!

Rudi Bye

Tags: Toshiba

Similar Questions

  • I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

    I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

    Hi Charley777!

    I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

    Help to connect your iPhone, iPad or iPod touch with your car radio

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

    Thank you for using communities of Apple Support.

    See you soon!

  • Satellite A300 - how to use the recovery with external DVD drive disc?

    Hello

    I bought a toshiba Satellite A300 - 15 d

    FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

    What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

    Thanks in advance

    Hey Buddy,

    Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
    You can get a new drive to an authorized service provider.

    But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

  • Can not listen using bluetooth headphones with music Apple after updating iOS 10

    I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

    Any suggestions or help would be greatly appreciated.

    Hi the edema,

    It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

    As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

    Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
    6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

    Thanks for stopping by Apple Support communities. See you soon.

  • Problems with speakers using Bluetooth (a2dp) with several Windows users

    I have the bluetooth speakers (Yamaha NX B02)
    they are easily configurable in bluetooth stack Toshiba everything works
    as long as I use my profile

    If only someone else wants to log on to any other profile (Windows XP Home edition)
    battery Bluetooth pair with the speaker Yamaha

    I disconnect the speakers on my profile
    Speakers are in pairing mode - they are on the list of devices to connect
    but they just don't connect.
    Once they are paired on the profile "User1" on "Laptop1".
    the "user2" or any other on the same "laptop1" aparently is to buy a new set of speakers
    coz this standing right next to him are to be used when you are logged in as "user1".

    First of all I really don't see why the bluetooth stack holds the list of devices, and a different configuration for each user?
    However - is it possible to IMPORT connection parameters of device somehow of my profile to any other
    Or maybe there is something else I should do to be able to pair it with my speakers no matter as to which I am connected now

    Thanks in advance

    And YES - the Yamaha set sounds great - I'm really happy

    Hello

    I m not 100% sure that if I understood exactly you <-->Bluetooth speaker problem.

    According to your message, you can't pair BT speakers during the second use Profil2 if the speakers are already paired with the mer1. Am I wrong?

    Well, in my opinion there are nothing wrong because the speakers were already connected to the laptop using the BT. to my knowledge you cannot connect any BT device if it s already connected using another profile.

    I think you should always disconnect the BT speakers using the mer1 if you use it n t. Then another user using Profil2 would be able to connect the BT speakers.

    Best regards

  • Several Bluetooth devices with the same name matching

    A few weeks before to get my Moto X 2014 recently, I installed a Kenwood KMM-BT312U car radio in my car and another in my truck. At the time, I was using a 2013 Moto X running CyanogenMod 12.1. Easily paired phone with the units main and all was fine. Unfortunately, my Moto X 2014 (stock) can't seem to tell the difference between the two central devices; He is well matched with one, but then will not see the other as a non-paired device. If I reactivate Bluetooth then next turn, the phone tries to connect to the second device but fails (understandable). It doesn't seem to matter which unit I first log in, the end result is the same. Central devices running the latest firmware and Kenwood, based on the name of the Bluetooth device is not editable.

    Anyone have any suggestions on how to fix this?


  • BlackBerry Smartphones help: how to use BB Bold with external Bluetooth GPS receiver

    Hello, I need help after 3 weeks of research.

    I use a "BOLD" BB on Proximus (provider in Belgium) but without BIS or BES.

    I need to use the GPS function, so I buyed a Bluetooth receiver. This function works after matching "BOLD", but I'm looking a sweet or maps to use my BB as a GPS (TOMTOM, GARMIN or other).

    Do you know if it is possible without the data (BIS or BES) service and if so with what software or maps can I use GPS.

    On the other think, can I have the BlackberryMaps on my "BOLD". I had a curve and worked this function to display maps.

    Thanks for your help.

    Llila

    Hello

    I'm sorry but I tried to install the Google maps software, but it does not work.

    I installed give hoe GPSed me the position and the time from one point to another, but there is no mapping.

    My problem is a problem of mapping because that on Blackberry, they give only the possibility if you are connected to the internet when your gps works.

    I'm looking for a program that use maps embedded on the card micro SD for my "BOLD".

    Thanks in advence for your help.

    Xavier

  • The use of devices with Windows 8

    Hi all

    I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

    Take a look at this document, which covers:

    I hope that this document provides assistance.

    Good luck!

  • Problem of Bluetooth device with windows 7 ultimate 32 bit (AND NOT the PHONE NOKIA)

    Hi, I have a compaq presario THAT CQ 61 pre-installed with windows vista home premium. I add a bluetooth headphone iluV i212 & worked with windows vista. When I installed windows 7 for the first time, he also worked but when I reinstalled windows 7 ultimate, yet, it does not & windows needs drivers for this helmet. So please provide me with the latest driver bluetooth for my laptop in order to solve this problem. Thank you

    You can install this driver and check... ftp://ftp.HP.com/pub/SoftPaq/sp43501-44000/sp43930.exe

  • Using two devices with 1 vCAC vCO

    Does anyone do this? We had to set up a second server of vCO our site to California because of the latency. I have everything set up, but I noticed that the 'WFStubBuildingMachine' workflow have identical ID, so when I try to perform work for the other vCO is calling it the first instance of vCO since they have the same ID. At least that's what seems to be the case.

    Does anyone know how or climatiqueLes ID or an another workaround?

    Edit: After thinking about this topic, it seems that the problem is that each execution of the construction work is that the first device to vco. My question is how I can the difference between the two and various plans? For example, I want Blue 1, 2 and 3 to go to vco1 while blue 4,5,6 go vco2. Is this possible?

    Edit2: I was told by someone to use the plugin to multi-node vco for just this sort of thing!

    There is in fact a custom property, you can assign to an action plan to make it use a vCO server.  The property is VMware.VCenterOrchestrator.EndpointName, add this in the master plan and under value properties tab, highlight the name of the server that you added as an endpoint in the vcac you want to use vco

  • Using VC device with AD

    Can someone clarify what level user should be used to add AD to the VC unit?

    2 (optional) select Active Directory Enabled to allow Active Directory for VMware vCenter Server
    Server Appliance.

    Is it a domain administrator?  I think that need only a read-only user in AD to add?

    Sorry if my met strange answer. But you never mentioned SSO, or unit of vCenter version number you use, so I guess you want to add the device to the announcement, which will ask on the page to set up an administrator account.

    Concerning

  • Using multiple devices with edge inspect

    I tried to add a second mobile device at a session of edge inspect and have a message: "upgrade now to connect several devices at the same time." I can't find how to change

    It is not a unique product subscription available to inspect more unfortunately. In order to connect several devices, you must have a full creative cloud subscription - https://creative.adobe.com/plans

    = Ryan

    [email protected]

  • Is there a Manager Bluetooth of Windows 8 that I need to use my device access?

    Device: Motorola S10 - HD

    Problem: It works the first time I install it. After a period of inactivity, I turn on the headset. The list of devices shows the headset listed, but it does not play through it. Even if I click 'test' in the settings for headphones in the Device Manager, it plays in my speakers. The only solution I've found is to remove the device and then reinstall it.

    I have another S10 - HD related to my iPad, and I've never had problems. If S10 - HD on my iPad is turned on, it automatically logs and cheek.

    Thanks in advance for any input on the issue.

    Tim

    Hi Perkins,

    Thanks for posting your question on the Forums of community of Microsoft.

    From your problem description, I understand that the Motorola s10 - hd does not work with your computer of Windows 8.

    1 is the work of other Bluetooth devices with your computer?

    Method 1: Run the hardware troubleshooter


    a. press Windows + W, click applications, if it is not selected
    b. Type Control Panel and press enter
    c. If the icons are not displayed in a larger size, click on the category that is top of the list and choose large icons
    d. now click on troubleshooting
    e. click on material and audio and click on find and fix problems with the equipment and devices and go further.

    Method 2: Update the drivers for the Bluetooth device

    a. place the upper right of the mouse and click on search
    b. type devmgmt.msc and press enter
    c. now locate the device, right-click on it and click Update.

    Method 3: Install the Bluetooth driver in compatibility mode

    I suggest to refer to the article mentioned below and check if the problem persists.

    Why Windows is not find my device?

    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly?

    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • iPhone 6s crackling when using bluetooth

    Hello. I currently have 6 s Iphone and when I connect it to my car via Bluetooth for listening to music, I get a lot of crackling coming through the speakers. Has anyone else had a similar problem?

    Hello there Wire1981,

    Thanks a lot to join us in the communities of Apple Support. I love listening to music from my iPhone in the car too and audio crackles would permanently ruin the moment.  I have a few things that we can try to solve the problem.

    Firstly, have you tried to connect your iPhone to other Bluetooth devices?  Do you notice crackling in the sound he so?  You have another Bluetooth device, you can try to test with your car to see if the crackling persists?

    Let's start with an article that guides you through setting up your iPhone with a Bluetooth device:

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

    You can try setting up with Bluetooth headphones or speakers and test to see if you notice audio crackling it.  Once you have followed this article to test the audio on another Bluetooth device, we can configure with the car again.  You can remove the Bluetooth profile that is currently out there by going to:

    Settings > Bluetooth > under MY DEVICES, press the (i), then tap Forget this device.  Then follow the instructions below:

    Help to connect your iPhone, iPad or iPod touch with your car radio

    Best wishes and hope your day is great!

  • I recently got an iphone unlocked 5. It used to be locked to T-Mobile. Can I use this unit with any service of cells now or only to others who use SIM cards?

    I recently got my old 5 s T-Mobile unlocked iPhone. Given that T-Mobile is a basic service of SIM, I wanted to see if now it is unlocked, if I can use the device with no - SIM services (i.e. Verizon) and SIM (T-Mobile, AT & T) services?

    KaylianVA wrote:

    I recently got my old 5 s T-Mobile unlocked iPhone. Given that T-Mobile is a basic service of SIM, I wanted to see if now it is unlocked, if I can use the device with no - SIM services (i.e. Verizon) and SIM (T-Mobile, AT & T) services?

    Verizon only lights up iPhone 6 / 6 + and 6s / 6 s + tmobile.

    Verizon phones (except for some other 3 G phones they sell) require a SIM card. Any 4 G LTE phone requires a SIM card.

Maybe you are looking for