Configuration Cisco AP 2600 (AIR-CAP2602I-E-K9) and Cisco 2500 wireless controller?

Similar Questions

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• have a cisco CISCO2106 wireless controller. I have configured mangement interface and AP-Manager in this. I can now connect to WLC, through the management interface, but the problem is AP-manager interface to SURVEY not so AP aren't the assoc

  

  What do you mean that's not upward? Can you please upload config and debug? What output do you see on the side of the AP using the console port?

  What is the method of discovery?

• Aironet 2600 series AP (AIR-CAP2602E) to stand alone

  Hello

  I bought the AP incorrectly, instead of getting the "Standalone/standalone" version (AIR-SAP2602E), but I bought the controller-based version

  (AIR-CAP2602E); My question is that I can use 'ap3g2-k9w7 - tar.152 - 2.JB.tar' too flash to a standalone "Standalone /?

  If Yes, can anyone help to POINT me to the "Flashing method" right and necessary things like cable from the console or just "ethernet cable" will do? Enjoy it!

  When you download the image, if you hover your mouse over the name of file, a pop up appears with MD5.

  Sent by Cisco Support technique iPhone App

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support

• Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

  Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

  Hello

  HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

  This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

  If you can't make it work, you must decide between a new card or another router.

  Personally, if it's new and I could return it, I'd get a different router model. But YMMV

  ------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Quality of the Air on AIR-CAP2602I

  Hi all

  just a quick, AIR-CAP2602I supports the full-fledged clean characteristic air?

  any good links/blog out there on how to enable it and its air pure vs comparison explicit?

  How to activate this

  Wireless > 802. 11a / g > CleanAir > under CleanAir settings, check "enabled."

  his air pure vs express comparison

  CleanAir Express is only access point "1 K" models, i. e.  1600, 1700, 1800.  The difference between CleanAir and CleanAir Express is a dedicated "chip" for the 2Ks & 3Ks CleanAir.  CleanAir Express does not have this chip for all CleanAir function is made by the CPU of the APs.

• Value in BTU AIR-CAP2602E

  Hello, I am looking for the AIR-CAP2602E BTU value. I can't find it in the sheet.

  The amount of heat generated is a function of the amount of energy used.  The 2602 uses up to 12.95W which translated to 44.2 BTU.  If you clear one or both, radios, I would expect this number considerably.

  John

• Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

  Hello

  We have several AP 521 in our headquarters main building as well as our remote branches, totalling about 16 AP, four in our main headquarters office and one in each brachh distance.    All AP at this moment are stand-alone devices.

  We are contemplating centralized management of ALL our AP devices implementing this controller 526, where we can handle easy to access list of mac or other parameters.

  Here are my questions based on reading some documents based on 526 controllers:

  1. I undersland these models AP and 526 controller model are EOL, - what are these end of Support - at this time we are not planing to migrate to the new AP devices yet, maybe in 2-3 years on the road, but definatetly SmartNET is a must on these.

  2. for 526 be able to handle any device of AP, is the peripheral access point must be converted on KNEES, is that correct?

  3. as I read, 526 controller can support up to 6 devices AP 521, if this is the case for example... I can say install a 526 to the main AC controller which has only FOUR peripheral wireless AP and be able to manage also the 2 more devices AP of REMOTE offices that are not directly connected to main office switches HQ but to have connectivity that are across our links WAN MPLS or (wireless AP) should be directly connected to the LAN so that the 526 be able to manage devices, if possible, then that would allow me to implement 3 526 controllers in the HQ Office to handle all 16 devices AP of our entire company... Please correct me if that's not true.

  4. and finally, for example, say I have MAC ACL applied to each AP devices, now with the 526 controller if we go about using centralized management would be that I could create a MAC acl and indicate to the Scheduler to propagate the ACL to the devices all THE AP which are under its management?

  Thank you for your help

  Concerning

  1. This is the end of life announcement:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/end_of_life_c51-568040.html

  2. Yes, LWAPP APs are easier to manage from the 526:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/product_data_sheet0900aecd8060c22b.html

  3. you will be well on MPLS for AP to join a remote control. You may need to change the MTU if you have problems with the junction of AP.

  However, remember that if you are MPLS connection goes down, you lose connectivity, so it is a design decision to make.

  4. in the list of features, you should be able to:

  http://www.Cisco.com/en/us/docs/wireless/controller/526/1.5/configuration/guide/A3_feature_list.html

• Air-sap2602i-n-k9 <>= air-cap2602i-n-k9

  I wish to order two autonomous.

  What is the difference between "air-sap2602i-n-k9" and "air-cap2602i-n-k9"?

  SAP means autonomous.

  Medium CAP controller.

  But it does not matter if you have ordered an evil because it is very easy to convert the SAP AP in Cape TOWN and vice versa.

• Help to configure cisco

  Hi all

  I need your help here I am trying to configure a router Cisco 881 when infact I have a connection which reached the Wan port on the router, I set up 88.le XXX (public IP) I put the default gateway etc... his short film works because when I ping the IP to the outside, than it works
  My problem, I want to have internet on my FastEthernet port 0, I configured a dhcp 192.168.0.X albums pool it works but I got no internet despite having the nat outside inside put the road, so I added a static route, but it is not the copy of my config work thank you.

  1 running-config #show
  Building configuration...

  Current configuration: 5424 bytes
  !
  ! Last configuration change at 15:56:09 UTC Thursday, March 13, 2014 by admin
  version 15.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname R1
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  !
  No aaa new-model
  iomem 10 memory size
  !
  Crypto pki trustpoint TP-self-signed-2132292671
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2132292671
  revocation checking no
  rsakeypair TP-self-signed-2132292671
  !
  !
  TP-self-signed-2132292671 crypto pki certificate chain
  certificate self-signed 01
  3082022B XXXXXXXXXXXXXXXXXXXXXXXXXXXX
  !
  !
  !
  DHCP excluded-address IP 10.10.10.1
  DHCP excluded-address IP 192.168.0.254
  !
  DHCP IP CCP-pool
  import all
  Network 10.10.10.0 255.255.255.248
  default router 10.10.10.1
  Rental 2 0
  !
  IP dhcp pool vlan5
  network 192.168.0.0 255.255.255.0
  default router 192.168.0.254
  Server DNS 8.8.8.8
  !
  !
  !
  no ip domain search
  "yourdomain.com" of the IP domain name
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FCZ18047124
  !
  !
  !
  !
  !
  !
  !
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  switchport access vlan 5
  no ip address
  !
  interface FastEthernet1
  no ip address
  !
  interface FastEthernet2
  no ip address
  !
  interface FastEthernet3
  no ip address
  !
  interface FastEthernet4
  IP 84.14.XXX. X 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  !
  interface Vlan1
  Description $ETH_LAN$
  IP 10.10.10.1 255.255.255.248
  IP tcp adjust-mss 1452
  !
  interface Vlan5
  IP 192.168.0.254 255.255.255.0
  !
  default IP gateway - 84.14.209.185
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source list 2 interface FastEthernet4 overload
  IP route 0.0.0.0 0.0.0.0 84.14.209.185
  !
  access-list 2 allow 192.168.0.0 0.0.0.255
  not run cdp
  !
  !
  exec banner ^ C
  % Warning of password expiration.
  -----------------------------------------------------------------------

  Professional configuration Cisco (Cisco CP) is installed on this device
  and it provides the default username "cisco" single use. If you have
  already used the username "cisco" to connect to the router and your IOS image
  supports the option "unique" user, that user name is already expired.
  You will not be able to connect to the router with the username when you leave
  This session.

  It is strongly recommended that you create a new user name with a privilege level
  15 using the following command.

  username secret privilege 15 0

  Replace and with the username and password you
  you want to use.

  -----------------------------------------------------------------------
  ^ C
  connection of the banner ^ C
  -----------------------------------------------------------------------
  Professional configuration Cisco (Cisco CP) is installed on this device.
  This feature requires the unique use of the user name "cisco" with the
  password "cisco". These default credentials have a privilege level of 15.

  YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
  IDENTIFICATION INFORMATION PUBLICLY KNOWN

  Here are the Cisco IOS commands.

  username secret privilege 15 0
  No username cisco

  Replace and with the username and password
  to use.

  IF YOU DO NOT CHANGE THE IDENTIFICATION INFORMATION PUBLICLY KNOWN, YOU WILL HAVE
  NOT BE ABLE TO CONNECT TO THE DEVICE AGAIN ONCE YOU HAVE DISCONNECTED.

  For more information about Cisco CP, you follow the instructions of the
  Of your router's QUICK START GUIDE or go to http://www.cisco.com/go/ciscocp
  -----------------------------------------------------------------------
  ^ C
  !
  Line con 0
  local connection
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 23 in
  privilege level 15
  password
  opening of session
  entry ssh transport
  line vty 5 15
  access-class 23 in
  privilege level 15
  local connection
  transport input telnet ssh
  !
  !
  end

  Add below

  interface Vlan5

  IP nat inside

• Cisco 526 Wireless Express Mobility Controller supports AIR-LAP1140N?

  Does anyone know if Cisco 526 Wireless Express Mobility Controller supports the AIP-LAP-1140N Access Points?

  This isn't. The WLC526 supports only the AP521.

  HTH,

  Steve

• Basic questions of configuration Cisco Aironet 1250

  Hello

  I'll be three Aironet 1250 within a building.  It won't be a wireless controller, the AP will be autonomous.  I'll put them all the same thing, with WPA2 wireless encryption.  My question is, what is important and beneficial to add the configuration to the s AP so that they are aware of the other (for roaming maybe)?  If Yes, what is this technology called and someone could direct me to a section of a guide that could illustrate this?

  Or I'm fine with just stand-alone configuration 3 AP as it is.

  All other pointers are welcome.

  Thank you!

  Hello

  If you use the pre-shared as an authentication method, so there is nothing special to do. As long as they have the same SSID, are in the same subnet and are connected to the same network, roaming will be fine.

  No specific configuration is required.

  Nicolas

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Cisco 526 Wireless Express Mobility Controller

  We just bought to UC520, 526 and a LAP521 controller. We got the UC520 upward and running in 15 minutes, but the 526 does not include a lot of documentation. Can not have find the 521 AP on the network nor will it set the layer mode 2. I don't want to configure routing for a 4 Office of PC couche3. During installation, the only option it gives is layer 3 and the documentation says it will make layer 2? Can someone give me any assistance?

  First of all, set up like you would a 4400 WLC or 2106. I will attach the link configuration guide here for you.

  http://www.Cisco.com/en/us/docs/wireless/controller/4.1/Configuration/Guide/ccfig41.html

  Many of the advanced features are disabled on the 526 but you set up substantially the same.

  Dennis

• AIR-WLC4402-25-K9 and AIR-WLC2125-K9

  Hello

  I have 20 ROUND 1131 G to deploy with a wireless controller and I have to choose between the AIR-WLC4402-25-K9 and AIR-WLC2125-K9. I would like to khnow the main differance between this espacially products in terms of performance (throughput).

  Thanks in advance

  Anita Nizar

  Hi Anita,

  Cisco documentation;

  "While Cisco 2100 series wireless LAN controllers supports transactional environments such as handheld scanners in retail wireless, Cisco 4400 series wireless LAN controllers are recommended for applications, high speed and high intensity of multicast such as bulky, videos, push-to-talk data files."

  Series 2100 Cisco Wireless LAN controllers

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/product_data_sheet0900aecd805aaab9.html

  I hope this helps!

  Rob