: Configuration ERROR 16

Similar Questions

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows Media Center Configuration error

  Hello. I found people with this problem all over the internet but I have yet to get a final solution.

  My PC is running Vista Home Premium with Media Center the greats. It is connected to my wireless network.

  My Xbox is connected to the network directly, as he's sitting right next to her.

  My PC detects the Xbox in 'Network' and it appears as an Extender when I run the Media Center application. My Xbox gives me the 8 digit code and I put it. I said I want to share media, and it then goes to the configuration bit extender. Then it says Configuration error.

  I have enabled Media Player via my firewall, open all the necessary local ports and don't have any other firewalls up. I don't know what is happening.

  I'd like to get this up and running, so any help is welcome.

  EDIT: Just realized this placed entirely in the wrong place. Please move it, mod?

  Hi free-kill.

  Thanks for choosing the Windows vista Forums.

  I suggest that you go through the link below that says

  1. how to set up a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx#EPD

  2. how to solve problems with a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/e217efbf-8A5D-4681-af74-c01e1b648b641033.mspx

  I also suggest that you visit the following link to get the best answers to the question since it is linked to the Xbox:

  http://forums.Xbox.com/

  Best regards, |
  Marnie.

• Windows vista side by side - configuration errors

  Agree with others, I need clear instructions step by step to solve this problem.

  I started having side by side configuration errors trying to open Chrome.  It then spread to Quicken.  Then Norton.  I took my laptop to a computer store to fix.   It has been cleaned and "fixed."  But tonight just trying to open a PDF file, I'm back for another side by side configuration error.  When does this stop?  How can I get rid of this error for good?

  Help, please!

  Have you chk these links?

  How to fix the side by side configuration error?

  Error message: side-by-side Configuration is incorrect

• DMA2200 not will impact configuration and reports a configuration error

  I used the DMA2200 successfully until recently when he lost contact with my Windows 7 PC. The PC can see the DMA2200 on the network, but after 8-digit code, I always get a configuration error and a new user (Mcx1). I use AVG 9.0.819. This does not have a firewall, so I use the built in Windows 7 firewall. This deactivation makes no difference. My PC has been upgraded to Vista successfully little after that Windows 7 is out. I used the DMA2200 since then OK but maybe never implemented since the upgrade of the operating system. I checked for DMA2200 updated firmware, but it signals that I am up to date. My connection is an administrator. I keep everything where I can.

  The Windows logs I get (see below).

  Can anyone help here please?

  Kind regards

  VIC

  Journal entries: -.

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 30/05/2010 14:00:58
  Event ID: 545
  Task category: Configuration
  Level: error
  Keywords:
  User: Lojoka\Vic
  Computer: Lojoka
  Description:
  Media Center Extender Setup cannot create an account for the extender with ID: uuid:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED.

  Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      545
      0
      2
      4
      0
      0 x 8000000000000000
     
      6591
     
     
      Media Center
      Lojoka
     
   
   
      UUID:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED
      -2147024597
   
  

  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/05/2010 14:00:57
  Event ID: 1533
  Task category: no
  Level: error
  Keywords:
  User: Lojoka\Vic
  Computer: Lojoka
  Description:
  Windows cannot remove the profile directory C:\Users\Mcx1-LOJOKA.Lojoka.005. This error can be caused by files in this directory that is used by another program.

  DETAIL - the directory is not empty.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1533
      0
      2
      0
      0
      0 x 8000000000000000
     
      79970
     
     
      Application
      Lojoka
     
   
   
      C:\Users\Mcx1-LOJOKA.Lojoka.005
      The directory is not empty.
  
   
  

  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/05/2010 14:00:57
  Event ID: 1511
  Task category: no
  Level: error
  Keywords:
  User: S-1-5-21-2753804710-3089563717-4261566473-1045
  Computer: Lojoka
  Description:
  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1511
      0
      2
      0
      0
      0 x 8000000000000000
     
      79971
     
     
      Application
      Lojoka
     
   
   
   
  

  Solved! The problem was a software the Bank invites you to install. It's report. It has never given any other issue. I've uninstalled it during my investigations and the Extender (DMA2200) has finally set up OK. After you have reinstalled the report still seems to work OK.

  I hope this helps someone!

  VIC

• Configuration error

  I've upgraded to a card mother Gigabyte and processor Intel i5 on my HP Pavilion p6320f pc, (the old card mother Pegatron - came out) but I can not get my pc has started, and it keeps giving me the message "a configuration error has been detected." I checked and re-checked BIOS settings nothing works. Am I missing something? Help, please.

  Here are the specifications of the HP Pavilion p6320f desktop. Since you have replaced the motherboard with one that is different from the original, your operating system and the HP recovery discs no longer works.

  Please descirbe your better/more detail question. Is this error in the BIOS? Is it in Windows?

• Configuration error up to Xbox 360 as extension of media including Windows 7 PC multimedia

  Running Windows 7 x 32.

  Until the recent XBox 360 update, everything worked fine using 360 as a media Center Extender.

  Now fails and when I try to resestablish a connection, a configuration error arises.

  Network connection looks very good I can still media playback fine on the Xbox interface.  Media Center seems to find and install the extension OK, just fails during Setup.

  Have tried with AV and fiewalls disabled (Karspersky) without success.

  Frustrating that was working fine, now the functionaility is lost.

  Any help would be greatly appreciated

  For months, I met a problem exactly as described here, but I finally fixed it on my machine and I think that I learned at the base of it.

  The fix (this is for Windows 7, can also apply to Vista):

  1. find your file 'Users' (usually c:\users).

  2. under "Users" folder, navigate to the subdirectory "Default\AppData\Local\Microsoft\Windows Live".
  Note: The directory does not exist, but I saw the problem of the Extender only on a computer that has it.

  3 inside of that directory, there are additional subdirectories (e.g. "Bob" and "SqmApi"). Inside, there are several files with the extension .sqm. THE PROBLEM IS WITH. SQM FILE PERMISSIONS. Specifically, the profile service has access permissions or to copy files when you create a new profile.

  4. to solve the problem of authorization, perform the following actions on each of the SQM files.
  Note: Inherit permissions from the parent container will grant all access to read files.

  a. right click on the file, select Properties.
  b. Select the Security tab, click the Advanced button
  c. Select the permissions (default) tab, click on change permissions...
  d. MARK THE BOX: include permissions can be inherited from the parent of this object.
  e press the OK button several times to close all dialog boxes.

  Then, the Media Center Extender installation program as per regular instructions.

  While these steps managed to fix my computer, they may not apply to all situations. My advice is to run the following diagnosis:

  1. use the control panel to create a new user account.

  2. use "Switch user" (or Log off/Log) in an attempt to connect to this new account. This attempt will fail (if not, you may have a different problem).

  3 look at the log of the events of 'Application' (under "Windows logs") for the relevant events.

  On my machine, I received several warnings with 1509 event Id on files that could not be copied from Users\Default to Users\TEMP due to access denied errors. There were files .sqm with incorrect permissions.

  If you like this solution, you will also love our service http://docs.com ;-) The solution presented here can be found in documenthttp://docs.com/AF1P.

• Attempt to run CS6 first pro: Configuration error, please uninstall and reinstall the product, error: 1

  So I installed CS6 on my Z210 Windows 7 workstation. But when I go to open half of the programs, in particular first Pro I get this message...

  Configuration error

  Please uninstall and reinstall the product.

  If this problem persists, contact Adobe technical support for assistance, and
  mention the error code displayed at the bottom of this screen.

  Error: 1

  http://www.Adobe.com/support/

  I could really use some help here. What really gets me, is apparently the Adobe customer service does not all calls. Are you kidding me?
  Any help would be greatly appreciated.
  I found a similar situation here on this forum, but I still have questions:
   
  http://www.techyv.com/questions/Adobe-Photoshop-CS6-error-code-1

  Hello

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  If the problem persists, you can start the computer in a clean boot state, and then try to install the program.

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us informed if you need help.

• How to fix the side by side configuration error?

  I'm using Acer Aspire 5735

  Windows 7 Ulitimate

  Version 6.1 (Build 7600)
  I can't start all programs that I need. I need help. Thank you.

  Hello stephnavarra,

  More side by side configuration errors are caused by the lack of runtime C++ components or corruption.

  I would install all of the following conditions:
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  If you use a 64-bit system, you must install the (x 64) version of the above files. You can download from http://www.microsoft.com/downloads

  I hope this helps.

• Photoshop 2015.5 Configuration Error 16

  I keep getting configuration error when I try to run Photoshop from the creative cloud, as well as the error Code 16 application. How to fix this, I already tried to change the permissions according to the steps described here: https://helpx.adobe.com/creative-cloud/kb/configuration-error-cs5.html does not.

  

  Hi LGCVT,

  As you mentioned that you have already tried the steps here share 'in Adobe Creative Suite or Adobe Creative Cloud Configuration Error ', but it did not help resolve the "Error Configuration 16" for you, I recommend you check out the following threads where a similar problem has been addressed:

  16 persistent Configuration error

  Can the Configuration Error: 16 be resolved?

  Let us know if that helps.

• Configuration error 1 after upgrading to Mac OS Sierra (Illustrator)

  Hello world

  After that I have upgraded to Mac OS Sierra, some of my Adobe software started crashing. Adobe Acrobat XI opens but unexpectedly stops after a few seconds. But above all, Illustrator does not start. I get the Configuration error message (error 1) and suggested to uninstall and reinstall the software (which doesn't help).

  I tried to change the permissions for the files SLStore and Adobe PCD. And indeed, the permissions for Adobe PCD have been set to read only for the admin.

  Unfortunately, change the permissions did not help. I get the same error message. Also, once I have reinstall the software, change the permissions to read-only.

  It happened just after upgrading to Mac OS Sierra. I have no backup, so downgraded to El Capitan is not an option.

  Please help, the standard solution has not worked for me and I need Illustrator to survive.

  (I use a Macbook Pro; 13 Retina display. end of 2015; 2.7 GHz Intel Core i5 processor; 8 GB 1867 MHz DDR3 memory)

  Elkoban if you create a new admin account you encounter the same error?  You can find details on how to configure a new account Administrator install or run Adobe applications in the new user account. Mac OS X .

• I can't turn on ID CS5. [configuration error 213:5]

  I removed my old MBPro 15 inches and installed IDS on my MB Air El Capitan running.

  ID was found on the older machine with the same OS.

  I disabled ID on the old unit, installed on the Air (with serial number of course).

  It installed fine.

  If I try to open my Applications folder IDS, I get an error window, there is a "configuration error" error 213.5.

  I tried to restart as suggested, but makes no difference.

  Any suggestions? Looks like it should work fine.

  -Richard

  Try , I recently had reinstall CS5 and get a 'configuration error 213:5. How to beat

• creative suite of configuration error n ° 5

  When I try to open illustrator from adobe on my mac (OS X El Capitan) configuration error no. 5 is displayed. I have already uninstall a re-installed design more creative, it doesn't matter. The strange thing is that I am able to open Photoshop without any problem...

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• 213:11 configuration error

  I try to install lightroom 6 and I get a configuration error code 213:11. can someone help me?

  You may find the answer at this link - Adobe

  Install the error of the newspaper: "license store does not allow writing | Adobe Creative Suite 5.5, Adobe Creative Suite 5