configuration error Windows series 7/labview 9

Similar Questions

• Can someone tell me how do to emulate a Terminal window series in labview?

  Hi can someone tell me how do to emulate a Terminal window series in labview?  or give me a simple code to do?

  with baud rate 9600. RS232 cable.

  sticyfinger,

  Have you seen this example of community? He seems to talk about exactly what you want to do.

• Error-603 occurred While Building DLL under Windows XP and LabVIEW 8.6.1

  Problem:
  I am creating a DLL in Windows XP and LabVIEW 8.6.1 and I get the error-603.

  Error-603 to the DLL of the building.
  A component required for the Application Builder does not support the required functionality. This could have been caused by an older version of LabVIEW installation after installing this version. To correct this problem, reinstall the latest version of LabVIEW.

  Possible reasons:

  LabVIEW: Specified key or value does not exist.

  I reinstalled my LabVIEW 8.6.1, but the problem still occurred.

  What can I do to fix this?

  Reinstall, which is suggested here too

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows Media Center Configuration error

  Hello. I found people with this problem all over the internet but I have yet to get a final solution.

  My PC is running Vista Home Premium with Media Center the greats. It is connected to my wireless network.

  My Xbox is connected to the network directly, as he's sitting right next to her.

  My PC detects the Xbox in 'Network' and it appears as an Extender when I run the Media Center application. My Xbox gives me the 8 digit code and I put it. I said I want to share media, and it then goes to the configuration bit extender. Then it says Configuration error.

  I have enabled Media Player via my firewall, open all the necessary local ports and don't have any other firewalls up. I don't know what is happening.

  I'd like to get this up and running, so any help is welcome.

  EDIT: Just realized this placed entirely in the wrong place. Please move it, mod?

  Hi free-kill.

  Thanks for choosing the Windows vista Forums.

  I suggest that you go through the link below that says

  1. how to set up a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx#EPD

  2. how to solve problems with a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/e217efbf-8A5D-4681-af74-c01e1b648b641033.mspx

  I also suggest that you visit the following link to get the best answers to the question since it is linked to the Xbox:

  http://forums.Xbox.com/

  Best regards, |
  Marnie.

• Configuration error up to Xbox 360 as extension of media including Windows 7 PC multimedia

  Running Windows 7 x 32.

  Until the recent XBox 360 update, everything worked fine using 360 as a media Center Extender.

  Now fails and when I try to resestablish a connection, a configuration error arises.

  Network connection looks very good I can still media playback fine on the Xbox interface.  Media Center seems to find and install the extension OK, just fails during Setup.

  Have tried with AV and fiewalls disabled (Karspersky) without success.

  Frustrating that was working fine, now the functionaility is lost.

  Any help would be greatly appreciated

  For months, I met a problem exactly as described here, but I finally fixed it on my machine and I think that I learned at the base of it.

  The fix (this is for Windows 7, can also apply to Vista):

  1. find your file 'Users' (usually c:\users).

  2. under "Users" folder, navigate to the subdirectory "Default\AppData\Local\Microsoft\Windows Live".
  Note: The directory does not exist, but I saw the problem of the Extender only on a computer that has it.

  3 inside of that directory, there are additional subdirectories (e.g. "Bob" and "SqmApi"). Inside, there are several files with the extension .sqm. THE PROBLEM IS WITH. SQM FILE PERMISSIONS. Specifically, the profile service has access permissions or to copy files when you create a new profile.

  4. to solve the problem of authorization, perform the following actions on each of the SQM files.
  Note: Inherit permissions from the parent container will grant all access to read files.

  a. right click on the file, select Properties.
  b. Select the Security tab, click the Advanced button
  c. Select the permissions (default) tab, click on change permissions...
  d. MARK THE BOX: include permissions can be inherited from the parent of this object.
  e press the OK button several times to close all dialog boxes.

  Then, the Media Center Extender installation program as per regular instructions.

  While these steps managed to fix my computer, they may not apply to all situations. My advice is to run the following diagnosis:

  1. use the control panel to create a new user account.

  2. use "Switch user" (or Log off/Log) in an attempt to connect to this new account. This attempt will fail (if not, you may have a different problem).

  3 look at the log of the events of 'Application' (under "Windows logs") for the relevant events.

  On my machine, I received several warnings with 1509 event Id on files that could not be copied from Users\Default to Users\TEMP due to access denied errors. There were files .sqm with incorrect permissions.

  If you like this solution, you will also love our service http://docs.com ;-) The solution presented here can be found in documenthttp://docs.com/AF1P.

• side by side error windows 7 64-bit configuration

  When I download something like music which is an exe or winzip file, I get a side by side configuration error. I tried to install winzip and the error came. If I had a windows install disc I want to restore my computer. I saw on the internet uninstall visuals and re-download them, but I don't know witch to get. How can I fix it? It's a dell dimension e520 windows 7 Home premium.

  (Moved to programs)

  Hello

  Please contact Microsoft Community.

  I suggest you read the article below and check if it helps.

  How to perform a clean boot in Windows;

  https://support.Microsoft.com/kb/929135

  Important: once the computer is "Clean boot" mode, refer to the section "What is then when I have a boot environment clean?".

  Note: once completed, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Meet us, then we can help you further.

• System Configuration utility to troubleshoot advanced configuration in Windows 7 errors

  Hello!

  Can anyone help me give me some article or a link to cover all my needs in what concerns this topic?

  I need describe the use of the Troubleshooting System Configuration Utility Advanced configuration errors in windows 7.

  Please, help me.

  Jack

  Hello

  "New troubleshooting features in the Windows 7 System Configuration tool.

  http://www.TechRepublic.com/blog/Windows-and-Office/new-troubleshooting-features-in-the-Windows-7-system-configuration-tool/

  "With the help of the Microsoft System Configuration (Windows 7).

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c01853706&cc=us&destPage=document&LC=en&tmp_docname=c01853706

  "Use the System Configuration tool to solve problems."

  http://www.Petri.co.il/System-Configuration-to-solve-Problems.htm#.

  See you soon.

• Windows vista side by side - configuration errors

  Agree with others, I need clear instructions step by step to solve this problem.

  I started having side by side configuration errors trying to open Chrome.  It then spread to Quicken.  Then Norton.  I took my laptop to a computer store to fix.   It has been cleaned and "fixed."  But tonight just trying to open a PDF file, I'm back for another side by side configuration error.  When does this stop?  How can I get rid of this error for good?

  Help, please!

  Have you chk these links?

  How to fix the side by side configuration error?

  Error message: side-by-side Configuration is incorrect

• PS 11 elements, installed on the desktop Windows 7, download configuration error: 213:11?

  After a new installation of:

  Adobe Premiere Elements

  11

  Several

  program will not start: a configuration error: 213:11

  Please notify

  Cheers!
  -v-

  Please check: Configuration error. CC, CS

• Reminder error when adapter on LabVIEW 12.0.1

  I have an end are reminded the sequence that is located in the folder C:\Users\Public\Documents\National Instruments\TestStand 2010 SP1\Components\Callbacks\FrontEnd. This works perfectly well when the adapter is configured for the version of LabVIEW 12.0.1 development but the same sequence does not work when the adapter works to run the version of LabVIEW 12.0.1

  All guess why this is happening?

  Note: Everything is compiled mass with LabVIEW 12.0.1

  Thank you

  VS

  Hey Louisa,

  You said that everything has been recompiled mass but you can double-check to ensure that VI does not have an arrow broken execution? The error occurs generally when the VI is corrupted if you just double could check that. In addition, what is your LabVIEW card on? Could you try to have the "Automatic Detection" runtime LabVIEW adapter and see if the VI can browse the autodected one? Furthermore, what exactly is happening in this VI? Is it TestStand API calls, any call to network variables, any typedefs, etc..  If you get any errors again when you do this, please post them on the forum.

  -KP

• & quot; An error occurred while installing LabVIEW Real-time 2009 (in English). ...

  While trying to install the real time of the third quarter of 2009 DVD module, I get this error message.

  "An error occurred while installing LabVIEW Real-time 2009 (in English). Do you want to continue installing remaining products? »

  After removing the program OR series (USB) 1.1 installation completed up to the end.  If you answer no to continue to install the above question, the following error message refers to abduction OR Serial.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!