configuration for iTunes data are corrupted
I tried to update iTunes for several months without success. I also tried to uninstall it and all its components, but when I try to uninstall the iTunes file, I get a message saying that the configuration data for this product are damaged. Any suggestions?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
Tags: iTunes
Similar Questions
-
I can not play windows media player, or streaming movies. I'll start with this first. Can someone help me with corrupted files?
Hi dear,
1. do you get an error message when you try to play the files?
2. were there any changes (hardware or software) to the computer before the show?
If your computer has problems to play video or audio files in Windows Media Player, try using the troubleshooting Windows Media Player settings Troubleshooter to fix the problem. This utility checks the configuration settings and network for Windows Media Player to ensure that you can play the content you downloaded and saved on your computer, or content streaming over a network or the Internet.
If your computer has problems to access your collection of digital media files in the Windows Media Player library, try to use the of the Windows Media Player library Troubleshooter to fix the problem. The troubleshooter makes sure that Windows Media Player is installed correctly on your computer and checks if the Player library is corrupted.
Method 1: Run the utility troubleshooting of the links below and see if it helps to get the problem solved.
Open the troubleshooting Windows Media Player settings Troubleshooter
Open the troubleshooter in the Windows Media Player library
Method 2: Turn on and off Windows Media Player
a: Click on Start, type optionalfeatures and press to enter.
b: In the object list, expand multimedia features.
c: Clear the Windows Media Player check box, and then click ok.
d: Restart the computer.
e: Click Start, type optionalfeatures and press ENTER.
f: In the object list, expand multimedia features.
g: Place a check mark on Windows Media Player , and then click ok.
h: Restart the computer.Answer please if you have any questions.
-
Updated since CF10 CF11 error: configuration of page data are not valid.
Anyone having problems with CF11 put cache files CF10 when they upgrade? Where can I change the settings to the directory ColdFusion 11 rather than 10 ColdFusion?
HTTP 500.19 - internal error in the server error
The requested page cannot be accessed because the configuration data of the page are not valid.
Module IIS Web Core Notification BeginRequest Handler Not yet determined Error code 0 x 80070003 Config error Cannot read the configuration file Configuration file \\?\C:\ColdFusion10\cfusion\wwwroot\ipmcenters_org\web.config When you were on 10 ColdFusion, were serve you content in ColdFusion web root (\ColdFusion10\cfusion\wwwroot\...)? This seems to be the case based on the above error. If you use IIS, you should not use the sites off ColdFusion web root. If you have to, use IIS web root (C:\inetpub\wwwroot), although it is best to put your files on the web on a completely different disc of your OS (and ColdFusion must be it's own separate disk). So here's what I do (based on the different ColdFusion lockdown guides):
C: - OS file
D: - Installing ColdFusion (D:\ColdFusion10\...)
E: - websites (E:\WebSites\site1, E:\WebSites\site2, etc.)
The web.config file is an IIS configuration file (and the HTTP 500.19 error comes to IIS). This indicates that your IIS site configuration is probably at fault. You can take things apart and rebuild the site by lockdown CF11 guide and rebuild the site in IIS as a result.
-
How to make the Apache configuration for two different areas
Hello
I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
I have two clusters:
CLUSTER1: 3 managed servers (server1, server2, serveur3)
Cluster2: 2managed servers (server4, Server5)
I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
Now, I have installed an apache server on my laptop and configured the http.conf file.
Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
Here are the contents of my httpd.conf file:
#
# This is the main Apache HTTP server configuration file. It contains the
configuration directives # that give the server its instructions.
# See < URL: http://httpd.apache.org/docs/2.2 > for more information.
# See especially
# < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
# for an analysis of each configuration directive.
#
# Do NOT simply read the instructions here without understanding
# what they do. They are there only as advice or reminders. If you do not know
# consult the online documentation. You have been warned.
#
# Configuration and logfile names: If the file names that you specify for a lot
number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
# server uses this explicit path. If the file names do not start
# with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
# Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where file names are specified, you must use forward slashes
# instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always provide
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory under which the server tree
# configuration, error and the log files are kept.
#
# Do not add a bar slash at the end of the directory path. If you point
# ServerRoot to non-local disk, remember to point the LockFile directive
# to a local disk. If you want to share the same multiple ServerRoot
demons of # httpd, you will need to change at least the LockFile and PidFile.
#
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
ports #, instead of the default value. See also the < VirtualHost >
directive #.
#
# Change this to listen on specific IP addresses below for
# prevent Apache glomming on all related IP addresses.
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the features of a module that was built as a DSO you
# duty place corresponding 'LoadModule' lines at this location until the
# the directives that it contained are actually available before their use.
# Modules statically compiled (those listed by "httpd-l") is not necessary
# to be responsible here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule modules/mod_actions.so actions_module
LoadModule alias_module modules/mod_alias.so
LoadModule modules/mod_asis.so asis_module
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule modules/mod_authn_default.so authn_default_module
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule modules/mod_authz_default.so authz_default_module
LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
LoadModule modules/mod_authz_host.so authz_host_module
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule modules/mod_authz_user.so authz_user_module
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule modules/mod_cgi.so cgi_module
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
Modules/mod_deflate.so deflate_module #LoadModule
LoadModule modules/mod_dir.so dir_module
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule modules/mod_expires.so expires_module
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule modules/mod_headers.so headers_module
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule modules/mod_include.so include_module
#LoadModule info_module modules/mod_info.so
LoadModule modules/mod_isapi.so isapi_module
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule modules/mod_proxy.so proxy_module
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
Modules/mod_proxy_http.so proxy_http_module #LoadModule
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
Modules/mod_speling.so speling_module #LoadModule
Modules/mod_ssl.so ssl_module #LoadModule
#LoadModule modules/mod_status.so status_module
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule modules/mod_wl.so weblogic_module
* < IfModule mod_weblogic.c > *.
WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
MatchExpression /app1
* < / IfModule > *.
* < location /weblogic > *.
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
DebugConfigInfo WE
PathTrim /weblogic
* < / location >. *
* < IfModule mod_weblogic.c > *.
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
MatchExpression /app2
* < / IfModule > *.
* < location /weblogic > *.
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
DebugConfigInfo WE
PathTrim /weblogic
* < / location >. *
< IfModule! mpm_netware_module >
< IfModule! mpm_winnt_module >
#
# If you want httpd to run as a different user or group, you must run
# httpd as root initially and it will pass.
#
# Group / user: the name (or #number) of the user/group to run httpd as.
# It is generally advisable to create a dedicated and aggregatable for user
# httpd, as with most system services are running.
#
Demon of the user
Daemon group
< / IfModule >
< / IfModule >
Server configuration # 'hand '.
#
# The directives in this section implement the values used by the 'hand '.
# Server, which meets all demands that are not managed by a
definition of # < VirtualHost >. These values also provide defaults for
# all < VirtualHost > containers you can set later in the file.
#
# All these directives may appear inside containers < VirtualHost >,.
# in which case the value default parameters will be substituted for the
virtual host of # being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mail. This address appears on some generated by the page server, such
# as error documents. for example [email protected]
#
ServerAdmin < adminurl >
#
# ServerName gives the name and the port used by the server to identify itself.
# This can often be determined automatically, but we recommend that you specify
# explicitly to avoid problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName < servername >
# DocumentRoot: The directory you are going to use your
documents #. By default, all requests are taken from this directory, but
aliases and symlinks # can be used to point to other locations.
#
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
#
# Each directory that Apache has access can be configured in respect
# to which services and features are allowed and/or disabled in this
# Directory (and its subdirectories).
#
# Everything first, we configure the 'default' to be a very restrictive of game
features #.
#
< directory / >
Options FollowSymLinks
AllowOverride None
Order deny, allow
Refuse to all the
< / Book >
#
# Note that, from this point forward you must precisely enable
features special # to be enabled - so if something doesn't work not as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be replaced by what you set DocumentRoot.
#
< directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
#
# Possible values for the Options directive are "None", "All."
# or any combination of:
# Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named explicitly -'all Options '.
# is not give it to you.
#
# The Options directive is complex and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# For more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be 'All', 'None', or any combination of key words:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow, deny
Allow all the
< / Book >
#
# DirectoryIndex: sets the file Apache will serve if a directory
# is requested.
#
< IfModule dir_module >
DirectoryIndex index.html
< / IfModule >
#
# The following lines prevent the .htaccess and .htpasswd files to be
# seen by customers of the Web.
#
< FilesMatch "^ \.ht" > "".
Order allow, deny
Refuse to all the
Meet all
< / FilesMatch >
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive in a < VirtualHost >
# container, error messages related to this virtual host will be
# logged here. If you do define a for a < VirtualHost > error log
container of #, that host errors will be logged there and not here.
#
ErrorLog logs / 'error.log '.
#
# LogLevel: Control the number of messages in the error_log.
# Possible values include: debug, info, notice, warn, error, crit,.
# emerg, alert.
#
LogLevel warn
< IfModule log_config_module >
#
# The following directives define some nicknames format for use with
# a directive CustomLog (see below).
#
"LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
"LogFormat '%%u %t \"%r\ hour' % > s %b "commune
< IfModule logio_module >
# You must enable mod_logio.c use %I and frequency
"" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
< / IfModule >
#
# The location and format of the access (Common Log Format) log file.
# If you do not have any logfiles access set in a < VirtualHost >
container of #, they will be saved here. On the other hand, if you the do
# define per - < VirtualHost > access logfiles, transactions will be
# logged there and not in this file.
#
Common CustomLog "logs/access.log.
#
# If you prefer a log file of access, agent, and referer information
# (Combined logfile format) you can use the following directive.
#
#CustomLog "logs/access.log' combined
< / IfModule >
< IfModule alias_module >
#
# Redirect: Allows to tell clients the documents used for
# exist in your server's namespace, but no more. The customer
# make a new request for the document at its new location.
# Example:
# Redirect permanent/foo http:// < url >/bar
#
# Alias: Maps web paths into paths of file system and is used to
# access content that don't live under the DocumentRoot directive.
# Example:
# Alias /webpath/full/filesystem/path
#
# If you include a trailing / on /webpath, then the server will be
# require that he be present in the URL. It is also likely that
# duty provide a < Directory > section to allow access to
# the path to the file system.
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as assumed names, except that
# documents in the target directory are treated as applications and
# executed by the server on demand, rather than as documents sent to the
client of #. The same regulation on flight "/" applies to the ScriptAlias
# as for the Alias directives.
#
ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
< / IfModule >
< IfModule cgid_module >
#
# ScriptSock: On threaded servers, refers to the access path to the UNIX
decision # used to communicate with the CGI mod_cgid daemon.
#
Newspapers/cgisock #Scriptsock
< / IfModule >
#
# "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
# CGI directory exists, if you have set up.
#
< directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
AllowOverride None
None of the options
Order allow, deny
Allow all the
< / Book >
#
# DefaultType: Server default MIME type used for a document
# If it cannot establish also as file name extensions.
# If your server contains mainly text or HTML documents, it is "text/plain".
# a good value. If your content is binary, such as applications
# or images, you can use "application/octet-stream" instead of
# Keep browsers try to view binary files, as if they were
# text.
#
DefaultType text/plain
< IfModule mime_module >
#
# TypesConfig points to the file containing the list of mappings from
# MIME file extension - type.
#
TypesConfig conf/mime.types
#
# AddType allows you to add or replace the MIME configuration
# the file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress. Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented out, then you
# should probably define these extensions to indicate media types:
#
AddType application/x-compress. Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain "manipulators": file extensions
# No actions associated with the file type. It can be either integrated into the server
# or added to the directive of the Action (see below)
#
# To use CGI outside of ScriptAlias directories scripts:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi
# For maps of type (negotiated resources):
#AddHandler type-plan of the var
#
# Filters allow you to process content before sending it to the client.
#
# To parse .shtml for server-side includes (SSI) files:
# (You will also need to add "Includes" the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
< / IfModule >
#
# The mod_mime_magic module allows the server to use various boards of the
content of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the definitions of suspicion.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
((# 1) text 2) local redirects 3) external redirects
#
# Examples:
#Error Document 500 "The server made a boo boo".
#Error Document 404 Missing.html
#Error Document 404 "/cgi-bin/missing_handler.pl"
#Error Document 402 subscription_info.html < url >
#
#
# EnableMMAP and EnableSendfile: on systems that support.
projection in memory # or the sendfile syscall is used to deliver
# files. Usually, this improves the performance of the server, but must
# turn off when mounted network is served
# file systems or if support for these functions is also
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Additional configuration
#
# The configuration files in the conf/extra/directory can be
# included to add additional features or change the default configuration
# the server, or you can simply copy their content here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multilingual error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Entries to the fancy directory
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User directories
#Include conf/extra/httpd-userdir.conf
# Info in real time on the applications and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the manual for the Apache HTTP Server
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure connections (SSL/TLS)
#Include conf/extra/httpd-ssl.conf
#
# Note: The following text should be present to support
# start without SSL on platforms without equivalent/dev/random
but # a statically compiled in mod_ssl.
#
< IfModule ssl_module >
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
< / IfModule >
This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
Can soomebody help me cofiguring apache so that I can call the two applications.
Thank you
Ankit>
WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
MatchExpression /app1
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
DebugConfigInfo WE
PathTrim /weblogic
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
MatchExpression /app2
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
DebugConfigInfo WE
PathTrim /weblogic
>This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections
. Are you sure you understand what means that the configuration? Try something like this...
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
DebugConfigInfo WE
SetHandler weblogic-Manager
WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
DebugConfigInfo WE
where /app1 and /app2 are your weblogic applications contexts.
http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
http://httpd.Apache.org/docs/2.0/mod/core.html#location -
Hello
I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:
No writable calendars are configured for the invitations with the provider for Google Calendar.
My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.
I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.
What can I do? Is there a solution for this?
Thank you!
DanielUse CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
Or you may want to try CalDAV.
https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/ -
Drivers for DVD in computers are corrupt.
The DVD - RW for my laptop and desktop computer can not read or write. Both computers have Vista Home premium. Mircosoft support fix - it indicates that the drivers are corrupt. The two DVD stoped working in 2010.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Database is configured for Data Guard
I'm lance a UTF8 conversion on a development database, which has been cloned from Data Guard. There is a warning in the Migration status: "database is configured for Data Guard" which is looking at DMU to determine this? The database is opened in read-write mode and it behaves like a primary database (I have the MISP scanner and run updates to address representations not valid). I would like to know what I need to update the settings.
This prevent me to convert tables using DEC? When I try to select this option for all tables I get the message, "CDS does not support conversion method"Copy data using CREATE TABLE AS SELECT"for tables that are involved in a process like capture Oracle Streams, or apply.". Another method of conversion available for the table.
Thank you
Ben
CDS checks if the DG_BROKER_START parameter is set to true.
The problem with the ETG is independent of the Data Guard. The CDS is true for tables which:
-are asynchronous stream capture source, or
-update conflict managers have, or
-DML managers have, or
-conflict resolution settings have
The above tables are considered to be configured for Oracle Streams and are not supported by the method of conversion of DEC. This is because the DEC method creates a copy converted the table and falls from the original. The CDS is not able to move the configuration information from the old table to the new flow.
Thank you
Sergiusz
-
No writable calendars are configured for invitations
A few weeks ago I created the lightning (with the great help of the participants to the forum of TB) so that when I get an e-mail meeting invitations, I could accept, and they show up on my Google Calendar. A week ago, it stopped working.
When I receive an invitation, there is no button to accept. Instead, there is a notice that says "no writable calendars are configured for invitations, check the properties of calendar.
I made sure that Google calendar is present and selected in the tab of the Flash. I checked the calendar properties, and the email address where I receive invitations to meetings (my work email) is set as the e-mail address in the Properties dialog box. And the checkbox is enabled to turn on the calendar.
Thanks in advance, does anyone have suggestions to get TB/Lightning to work as it did before? That is to be accepted invitations to meetings and automatically add them to my calendar?
Thank you!
Well, you can then mark your message as 'Solution' for the topic?
Thank you. -
When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?
Disable the iMessage?
-
My e-mail and password are correct when I try to configure my mail in Thunderbird, but I always get the error message: Thunderbird could not find your e-mail account settings.
I have also entered with Gmail and was assured that it is configured for IMAP
Thank you.
-
Where are the guidelines on how to interface custom for LabVIEW data acquisition equipment?
I have a need to do some very specialized data acquisition that may require special hardware for the building. I would still use LabVIEW as the front end and maybe even wear parts of the interface of the final product. However, I can't find the documentation. Where is that is kept? I've seen references to a number of generic protocols, no links back to the details, which may be appropriate. The data are a band high bandwidth, but bursty with sampling frequency up to 40 MHz and events that lasts about 100 milliseconds. Can anyone recommend various methods would be most suitable for this application?
You can use the instrument driver model and guidelines.
http://www.NI.com/white-paper/3271/en/
Use google to search not for OR
I searched
national instruments instrument driver guidelines
-
I have Windows XP Home Edition Version 2002 Service Pack 3. I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading. Is it possible that updates sent me are for the 2003 Version? Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?
CrystalBall © SEZ...
See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9
-
How a policy without moving can be configured for iSCSI traffic in Nexus 5548UP? Are there side effects?
Hello
Side effect depends on your network config, but I can tell you how config no iscsi traffic reduction policy...
We have three-stage configuration in link below is image...
1. QOS class - for the first traffic ranking
2 queue (INPUT/OUTPUT) - this is where you book or traffic police
3 Netwrok QOS - where you key or setting MTU for classified traffic at the bottom of the basket which tissue in the nexus program
(config) # class-map type qos myTraffic / / traffic ISCSI of Match
(config-WCPA-qos) # match iscsi Protocol#policy - type myQoS-QoS policy map / / qos Set group 2 ISCSI traffic so that it can be recognized
class myTraffic
the value of qos-Group 2(config-WCPA-may) # class-map type networks myTraffic
(nq-WCPA-config) # match qos-Group 2(nq-WCPA-config) # type network-qos policy-map myNetwork-QoS-policy
(nq-pmap-config) # class type networks myTraffic
(config-pmap-nq-c) # break without moving
(config-pmap-nq-c) # mtu 2158
(config-pmap-nq-c) # sh type of network-qos policy-map myNetwork-QoS-policy(config-pmap-c-qos) # class-map type myTraffic queues
(config-WCPA-may) # match qos-Group 2(config-pmap-nq-c) # policy - map type queues myQueuing-policy
(config-pmap-may) # class type myTraffic queues
% of bandwidth (config-pmap-c-only) # 50
(config-pmap-c-only) # class type class default queues
% of bandwidth (config-pmap-c-only) # 25
(config-pmap-c-only) # sh policy-map type myQueuing-policy Queuing(config-sys-qos) # type of service-QoS policy entry strategy myQoS
(config-sys-qos) # type of service-network-qos myNetwork-QoS-policy policy
-service policy (qos-sys-config) # type myQueuing-policy input queues
(config-sys-qos) # type of service-policy output myQueuing-policy queuingLet me know your concerns
-
Configure Manager node for the two areas in weblogic
Hi friends,
I'm kinda new to weblogic. I need help to configure nodemanager to two areas.
I created two areas
1 Classicdomain
2 RPMdomain
For classic field, I created the machine and all the server has added to this machine.
MachineName: localmachine
Port: 5556
Plain
For RPMdomain I created the machine with the same name and the port and all servers added to this machine.
I registered both server using nmroll().
First domain has been configured with nodemanager.
In the second area, I am not able to start a stop managed server via the console.
Could someone please let me know how to configure the nodemanager.
Kind regards
Prates
Are able to launch those instances successfully from the command line using the command startManagedWeblogic.sh? Once you have started it, try stopping through the node Manager and then start it upward.
Also, do you have JSSE enabled in your case and/or disabled hostname verification? These errors indicate fundamentally flawed SSL handshakes with the node Manager.
-
Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.
Version for esxi: Patch 5.1 level 7
Virtual center of version 5.1
Source of storage - IBM v7000
Destination storage - Hitachi
Questions:
Events of breach RPO
Consolidation for the VM disk failure
Delta abandoned events
Time change events
NTFS error and warning (event ID: 137, 57)
RDP disconnect and ping does matter
Standby error
Volsnap error
Stop the server and offline issue
Install vmtools emits automaticallywell, in this case, we need to disable the standby of the end of the replication.
So that everything in triggering replication does not trigger the snapshot of the suspension.
Then test the if you get these errors.
Maybe you are looking for
-
Satellite L100-179 sometimes short, sometimes does not
Hello. My Satellite L100-179 is around the age of 9 months. A month after buying it is quite dead. Returned, and they replaced the card mother and keyboard. 4 months ago it does the same thing, but I left it for a day and she starts without a problem
-
Do not disturb turn them off by itself?
Lately, do not disturb automatically returns online whenever I get a message, defeat the purpose of DND. Why does this happen? Is there a solution to stay on DND? Version of Skype: 7.2.0.103 Windows 8.1
-
Error code: 646 (cannot install the Office updates)
Original title: WindowsUpdate_00000646. Update of security for Microsoft Office System 2007 (KB2289158) Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381) Update for the filter of junk e-mail in Outlook 2007 (KB2443839) I get
-
Can not connect to smart phone wvc80n
I couldn't connect to my wvc80n by my Android phone. I can with different laptops. Apparently, I get the name or password, or both wrong. I go to the web address that I normally go to. I use the name I gave to the camera and the password. It hap
-
I need help. I can connect to wireless internet. It says unidentified network
I have a hp Pavilion dv6700. I can't connect to the internet wireless however I can via ethernet. my computer is Windows vista... pls help... Thanks in advance