Configuration input: Terminal for voltage DAQmx block IA

Similar Questions

• I'm looking for voltage reading VI demo

  I just started with labview and according to a tutorial, I am looking for voltage reading VI demo. where can I find it?

  If you type analog in the search, you will get many vi on the side right else browse this way

  Material inputs and outputs > DAQmx > analog measurement > voltage

  Good luck

• Default time for IDM to block hosts

  In ID 4.0, what is the default time for IDM to block hosts (in the access list for a router)? And this time is configurable?

  Sensor CLI:

  end of config

  Service configuration-sensor-virtual virtualSensor

  Melody

  shunEvent

  ShunTime (minutes block guests)

  Of IDM:

  Click on Configuration

  Click on block

  Click blocking properties

  Update the blocking time input control.

  Note: This was recently added to the IDM, so you may need

  upgrade to the latest version of the IDS software.

• Why do my pci-6052e configured as traditional daq and daqmx in MAX?

  I have an old computer of three year with 1 GB of RAM and a 3.00 GHz running Windows Server 2003.  It has already been used for experiments of movement control and has a 7333 motion control card and a PCI-6052E.  Now all I want to do is sample data of a pressure sensor and a flow meter using the PCI-6052E, but for some reason, this card is configured in MAX as a DAQmx device and a traditional DAQ (Leagcy) deivce.  Unfortunately, when I write the LabVIEW 8.2 VI, the only available data acquisition tools are DAQmx and Max my two instruments are installed in traditional DAQ.

  If there is only one card PCI-6052E in the computer, why MAX card PCI-6052E called dev3 DAQmx and a card PCI-6052E dev1 in traditional DAQ?  How can I fix?

  Cpesko,

  I am happy here, you have a few things working under Windows Server 2003.  We do not however have any software under this OS except what is listed here.

  DAQmx and TDAQ are 2 different drivers and this is the behavior expected that devices that support both would be present in the title of each driver.

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• Output broken for writing DAQmx

  Hello

  I need emergency assistance with a problem I have with write DAQmx.  The 'DAQmx write VI' is located inside a while loop that repeats every 20ms.  I use queues to transfer data between several asynchronous VI and the data does not update all 20ms.  Because I'm not going to tie the whole project I faked the timing of 20ms to 'Wait for next ms Multiple' vocation.  What happens is I will send 20ms of data to the VI DAQmx writing, he will have all the data output with 4ms can sit idle for 16ms.  I implemented the task for the DAQmx example 1000 per channel at a rate of 50 kHz, which should take all 20ms to the exit.  I also checked the waveforms of entry the entry have 1 k samples and a detachment of the 2nd-5.  When I went from the DBL 2D table has not changed.  I want to emphasize that all data is sent into the 4 DC.  It's confermed visulaly and with the node 'written examples.

  I did a test where I hosted my VI to run as fast as possible.  In this case, the output was a sine curve, but looking more closely, I found that the output frequency of 25 Hz 5 times faster than the signal that I sent to the writing DAQmx VI.  In addition if you limit the loop to 10ms iterate the data is output for 4ms and the idle 6ms.

  I know that everything is configured correctly.  I rechecked the data I sent you the properties of the task.  She should be out correctly, but it isn't.  I tried calling support NEITHER and he was not particularly helpful.

  The equipment I use is a PXI 6723 AO map.  I will attach a vi that anyone could run and I will attach a picture of the exit on an oscilloscope. Thnak you for the help

  -James

  I solved my problem.  I needed to add a calendar DAQmx and DAQmx writing change the task before entering the while loop.  I use the calendar to set the mode of the sample and the source of the command, while simple DAQmx writing sends and matrix of zeros.  With these added it works very well.

  -James

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• Input parameters for the function/procedures

  Hello
  
  I have an input parameter in varchar2 to a procedure and a function.
  
  Oracle says that you can pass to the maximum value of 32767 bytes inside a pl/sql block for a varchar2.
  
  But outside, it is limited to 4000 bytes.
  
  Here, there is a small suitcase of test
  

  create or replace procedure test_p(a in varchar2) as 
   begin
    null;
     commit;
       End;
  
  CREATE OR REPLACE FUNCTION str2tbText(p_str in varchar2) return varchar2
          IS
                    begin
              return null;
        END str2tbText;
  
  SQL> declare
    2  a varchar2(32767);
    3  b varchar2(32767);
    4  c varchar2(32767);
    5  begin
    6  for i in 1..4004 loop
    7  b:=b||'a,';
    8  end loop;
    9  test_p(b);
   10  --select str2tbtext(b) into c from dual;
   11  commit;
   12  end;
   13
   14  /
  
  PL/SQL procedure successfully completed.
  
  SQL> declare
    2  a varchar2(32767);
    3  b varchar2(32767);
    4  c varchar2(32767);
    5  begin
    6  for i in 1..4004 loop
    7  b:=b||'a,';
    8  end loop;
    9  --test_p(b);
   10  select str2tbtext(b) into c from dual;
   11  commit;
   12  end;
   13
   14  /
  declare
  *
  ERROR at line 1:
  ORA-01460: unimplemented or unreasonable conversion requested
  ORA-06512: at line 10

  IAM here to more than 4000 bytes as an input parameter for a function of years of proceedings,
  But it works for the procedure...
  For the function, it throws error
  
  No specific reason please...
  
  Kind regards
  Mohammed

  This means that you have found the answer you're looking for? Then you can close the thread...

• Why can't customize a ringtone for a contact blocked, even though I've unlocked the?

  Why can't I use a ringtone for someone I blocked, even after their release he doing still up to the default ringtone?

  First thing I would try to solve the question is: after release of the number reset the phone (hold down the home and sleep buttons until the Apple logo appears) and try to assign the ringtone again.

• I installed the captain and my mac has been freezing on step "Configure your mac" for 24 hours. How do I please you?

  I installed the captain and my mac has been freezing on step "Configure your mac" for 24 hours. How do I please you? It is just to show the "set up your mac" and the turning circle Rainbow

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

• Help. Temp for voltage conversion.

  I'm currently trying to find a best way to calibrate the thermocouple read outs. I would like to be able to enter any temp for all TC and labView output the corresponding voltage. So I was hoping someone would have a way to make this temp for voltage conversion. Example if I want to do 250 C I need 10.153 mV how labView could be made to calculate this.

  This will allow you to enter the temperature you want for the simulation and corresponding voltage.

• Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor

  Thanks for the research on this issue.  So first of all, he could start after a few attempts in the end goes to the blue screen error at approx. 5 min. I started this path several times that in "safe mode with network" to try the many suggestions of repair for two days. " At this point, it's freezing just at "windows is loading files", but probably will go to blue screen error. Boot ups always come with "no input signal" for the monitor and signal switching in the Help menu for 5 min periods I've mentioned and then fails or "monitor going to sleep" occurs.

  The error messages rec'vd: corrupted image, corrupted file and header file check sum does not match the sum of computer control. The recommendations of the screen blue: disable the BIOS memory, any material current or drivers and check disk space.

  Some tent to fix: memory diagnostics and it showed 'no problem', checked monitor on another computer and it works, in a session of 5 min a download to 'fix' Microsoft via a USB problem like "search of windows crashes" but was 'unable to set', a few other attempts would show the "windows installer has stopped working" preventing any action.

  At the present time, am unable to start even with advanced at F8 options.  It's HP Pavilion 10/2007, with the help of HP. Its on a wireless network with a netbook, Blu - ray, occasionally a cell phone that works on windows live but none presents as a device.

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the exact error message that you receive?

  Method 1: Remove the external devices except the keyboard and mouse and try to restart the computer in safe mode and check if you can start inside.

  If you are able to boot into safe mode then try a restore of the system it and check if it helps solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: I suggest you do a system recovery options system restore and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: If the system restore does not help then do a startup repair and check if this solves the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• my collection of Microsoft solitaire' sez mid game for free. a block to the top with code #303019

  Separated from this thread.

  my collection of Microsoft solitaire' sez mid game for free. a block to the top with code #303019

  Hi Louise,.

  Let me help you with this.

  1. What are the troubleshooting steps you have done?
  2. This problem only occurs with the Microsoft Solitaire Collection or other games as well?

  I suggest you to bring the observer log files event to find the exact cause, which is the origin of the problem.

  Follow the steps to collect the log files:

  • Go to start, type event viewer. This will bring up the tile of the event viewer , click here to open the event viewer.
  • In the left pane, expand Windowslogs. Click on Application log and highlight the first event in the log and use the arrow keys to scroll down.
  • Most of your event will be information. You may see errors of Redor yellow warnings . If you see a red error, you can double-click on it to bring it and copy the contents into a document.

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  Thank you

• Configure Alerts email for hardware failures

  Our ESXi 5.5 environment goes live today and now it will be in production I was wondering if there was a way to configure alerts email for hardware failures. For example, if a disk goes wrong in our RAID array, I want to be emailed on this subject. Is this possible, and is there a link to find out how to implement that?

  Go to the Administration menu-> vCenter Server Settings-> E-mail and enter SMTP server and the account of the sender.