Configuration of a router in my house to extend second internet (WRT54Gv7)

Hello

I try to set up a second router in my house to provide the internet a couple of computers + wifi I have in the garage

A main router is ADSL router, which offers 4 ports LAN and WIFI (wifiA) and I have a cable from the router to the garage. This main router has the 192.168.1.1 address.

In the garage, I want to install a WRT54gv7 to extend internet at two computer and extend the reach of wifi. I want to use the router as a bridge, so all computers (those connected to the main router and connected to garageRouter are in the same network)

I see that the WRT54G is version 7, as this particular model, it cannot be installed an OpenWRT.

I can remember, I should then configure the router as:
-LocalIP address: something like 192.168.1.102
-Server DHCP: disabled to allow th eDHCP the main router server takes place,

And this should be everything, isn't it?

But that does not work, once I connect the wire from the mainRouter to the garageRouter, not only I don't have internet access, but also I lose the avaliability to connect to the garageRouter

Should I set up as a choice to "Automatic DHCP Configuration"?
Then are available: 'Static IP', 'PPPoE', "OCDP", etc...

Note: I have the router form old firmaware v7.00.4 update v7.00.8 build 008, but it makes no difference

Follow this:

http://www.Northshore-it.com/Tips/how-tos/cascade_linksys/#LAN_to_LAN

Tags: Linksys Routers

Similar Questions

  • How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

    How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

    Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

    What happens if they have an older linksys router?

    Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

    Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

    Click the log tab

    model # here

    http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

    192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

    If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

    http://192.168.1.1/

    This allows to connect you to the console of the router administrator and access its configuration screens.

    http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

  • "Printer settings not comply with the configuration of the router.

    Hello

    I'm trying to establish a wireless connection with my printer to my computer, but the answer above, "printer settings not comply with the configuration of the router" someone has the solution please. Peter

    Hello

     
    • What is the brand and model of the printer?
     
    You can check this link:
     
    Network printer problems
     
    I also suggest you to check the manufacturer support for assistance to correct the settings of the printer.
  • SSL VPN may be configured on the router from Cisco 881/K9?

    I'm now confused if SSL VPN can be configured on the router from Cisco 881/K9.

    Please someone advise me.

    If Yes, for only 5 users, what I need to buy the license or license is supplied with the router?

    Thank you.

    Yes, and you need a license:

    FL-WEBVPN-10-K9

    License SSL VPN functionality for up to 10 users (incremental), to 12.4 T based only IOS versions

    FL-SSLVPN10-K9

    License SSL VPN functionality for up to 10 users (incremental) for the only based 15.x IOS versions

  • My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

    I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

    I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

    My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

    Hello:

    If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

    Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

    If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

    Paul

  • EA6500 router password stop working when on the Internet

    My question is quite simple but really difficult to understand on a logical point of view.

    I have a new EA6500 (v1), I hung on the network and set it up using the router password by default is 'admin '. I have configured the PPPOE connection to my internet and then, as soon as it is connected to the internet, I am not able to connect to 192.168.1.1 more because it says that my router password is not valid. If I just disconnect the WAN cable and refresh it, the router password works now.

    I tried to change it and it continues to operate only if the router is not connected to the internet. When it is connected to the internet, I click on the "local access" mode, but get the same error "router invalid password." If I log in using my account Smart Wi - Fi, I get the error "error_gets_network" which disappears after about 1 sec and then it is up to the login page, or sometimes, it will simply ask the router password which will not work in any case.

    I have the latest firmware, but I reinstalled it always manually without success. I tried a few resets hard too but the problem is still there and it's really annoying because I can't go to the router configuration without cable router WAN. And I can't link my smart Wifi account since obviously the router password is not recognized and more if I'm on the internet.

    Any ideas?

    I tried with the latest version of Google Chrome (cleared cache and everything, and since it does not work when the router is not connected to the internet, I don't think it's a browser problem). Interface does not work with the latest version of IE (even in compatibility mode, maintaining the interface tells me to download the latest version of Internet Explorer, it's really ironic).

    Try Opera or FF? If IE 8, 9, 10 or 11, test value and mode of compatibility again.
    Disable any security browser addons such as No Script and Ad-Block or set them to allow all Pages when it is connected to the router.
    Clear all caches browser.
    Don't forget to log on to the Admin account on the router.
    Try disabling these features in Chrome:
    Top right corner, few bars options > settings > settings (left) > see the advanced settings.
    Uncheck the box for these:
    Use a web service to help solve the navigational errors
    Use a service forecast for complete searches and URLS typed in the address bar
    Predict the actions of the network to improve the performance of page loading
    Activate the protection from phishing and malware

  • Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

    Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • configure my WRT54G Router as access point?

    Hi all, hoping someone can explain the process of setting up my WRT54G as access point to connect to my new WRT310N router. I get under the floor and string a long ethernet cable to add wireless across the House but I don't know how to properly prepare for the router, if I can set up once it is hooked, etc.. ? I've read conflicting reports on the question if I need to change the SSID and if devices hooked to the point of access can still obtain IP addresses dynamically.

    The mixture of N and G will be as problematic?

    best,

    Chris

    For General configuration, see here.

    Use identical settings SSID und on both wireless security. Use many different channels. Then you have a roaming wireless network.

  • HP C4580 not scan to PC. I need help to configure my Netgear router please :)

    Hello

    I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

    I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

    Here's the answer:

    "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

    Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

    Thanks in advance for any help!

    Sorry, I don't need help after all

    It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

    My "all-in-one" now does everything it is supposed to do

  • I am trying to disable the option 'comments' on my wireless internet connection. I was told to go to my configuration of the router, but how do the router on my PC?

    In the past, I have activated the 'comments' option while others may have access to my wireless internet, but now I want to turn it off.  I got to go to my router configuration. How do the settings on my router on my PC?  I forgot how I activated the option.  Thank you very much.

    Hello

    You must contact the manufacturer of the router for the best assistance.

  • How is the best way to connect the configuration of my router and switch?

    I have a cable modem. connect to a switch, I have 2 computers connected to the switch. I also just connected my router wireless switch. That's the best configuration or I lose my firewall of the router in passing is not by ports directly above?

    Most of the cable modems will give an IP address, so connect a switch to the modem and then connection of two computers and a router to the switch will usually result in one of these three devices, get an IP address (and internet connection), while the other two will not be.  (Notice that I guess a true "Modem" and not a "Modem/Router" device).  The correct configuration would be to connect your router to the modem (router gets the unique IP address).  The router can then process from the addresses IP what either side LAN of the router, then plug the devices you need (including switch) to the router's LAN ports.  This also ensures that all devices will be on the same subnet that your connection scheme to separate devices on the router wireless from the other two devices on the switch (here, assuming that you have a router/Modem device).

    HTH,

    JW

  • Cannot access the configuration of my router (wrt54g) page

    I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

    My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

  • How to configure a wireless router WRT310N at att westell DSL

    Are there instructions explaining how to connect my att dsl westell moden to my Linksys router.  I change to att comcast service providers.  My router worked with my cable model, but I can't configure it to communicate with the dsl modem.  Any help would be appreciated.

    You have said that you put westell in Bridge mode and configured the linksys for PPPoE, but also enter AT & T DSL username and password? The manual mtu value and change the 1500 to 1492?

    Call AT & T and ask them your DSL username and password. Then enter that on the linksys. Then change the Mtu value and power cycle everything and then you're done.

    Don't forget to make sure that you connect the Ethernet cable to the port of your Internet linksys.

  • WRT160N v3: unable to connect to the page web configuration of the router with Firefox or IE

    Whenever I try to connect to my router's admin page, I get "the connection to the server was reset while the page is loading."  This happens with FIrefox 11 and started when I upgraded to 8 or 9.  A machine running FF 3.6 does not have this problem; I get right in.  Words IE 9 is "Internet Explorer cannot display the webpage" (after complaining about the certificate has expired).

    I ran Wireshark to see if I could learn something, but everything that I could understand was:

    https handshake was OK.

    First TLS packet is received by the router, which then immediately issues a reset and the connection is interrupted.  I don't know why.

    Has anyone seen this? or I have a setup that is screwed to the top (or router)?

    Then I did a full-on reset. I had tried to get in the Mode of administration, following an article in the FAQ, but the web page came in normal mode, default 192.168.1.1. From there on, I WAS able to make the success of downloading the new firmware from 2010 (v3.0.03). Unfortunately, once I've reconfigured the box to a similar to the previous configuration, I have the same problem: connection to https://10.244.122.1 of Firefox 3.6 works; 12 Firefox (now), it will fail, get the error "reset while page is loading". My last try will just disable the https - I just discovered where I can - and see if it will work. Because it's only on my home network, if traffic to the configuration page is not encrypted it really doesn't matter that much. (I had previously determined using Wireshark happened to reset during the TLS negotiation after the HTTPS had finished). And hell, that worked. So my problem is not resolved, but it is bypassed and I'll mark it closed.,.

  • Configuration of the router to allow VPN traffic through

    I would like to ask for assistance with a specific configuration to allow VPN traffic through a router from 1721.

    The network configuration is the following:

    Internet - Cisco 1721 - Cisco PIX 506th - LAN

    Remote clients connect from the internet by using the Cisco VPN client. The 1721 should just pass the packets through to the PIX, which is 192.168.0.2. Inside of the interface of the router is 192.168.0.1.

    The pix was originally configured with a public ip address and has been tested to work well to authenticate VPN connections and passing traffic in the local network. Then, the external ip address was changed to 192.168.0.2 and the router behind.

    The 1721 is configured with an ADSL connection, with fall-over automatic for an asynchronous connection. This configuration does not work well, and in the local network, users have normal internet access. I added lists of access for udp, esp and the traffic of the ahp.

    Cisco VPN clients receive an error indicating that the remote control is not responding.

    I have attached the router for reference, and any help would be greatly apreciated.

    Manual.

    Brian

    For VPN clients reach the PIX to complete their VPN the PIX needs to an address that is accessible from the outside where the customers are. When the PIX was a public address was obviously easy for guests to reach the PIX. When you give the PIX one address private, then he must make a translation. And this becomes a problem if the translation is dynamic.

    You have provided a static translation that is what is needed. But you have restricted the TCP 3389. I don't know why you restricted it in this way. What is supposed to happen for ISAKMP and ESP, AHP traffic? How is it to be translated?

    If there is not a static translation for ISAKMP traffic, ESP and AHP so clients don't know how to reach the server. Which brings me to the question of what the address is configured in the client to the server?

    HTH

    Rick

Maybe you are looking for

  • iOS 10, screen will not auto dim.

    Hello Since I updated to 10, my lock screen and home on my iPhone TO will not be automatically dim or turn off. I've updated my lock screen auto to a 30 second time out, but if I press the home button or receive a notification; the screen stays on in

  • V10 is slow and crashes, how to downgrade to v9 for a browser to work again?

    I just got the v10 install automatic update of Firefox. It is now very slow, often hangs for long periods to 100% of the CPU, cannot be interrupted. I can't click on buttons or links for 10s of seconds after loading a page. Now, it is essentially a n

  • 7 flow: flow of my Hp 7 5701 need help!

    I'm updating to win 10, and my tab locked by bitlocker. and I can't recover! can someone help me? Key ID: F06B2C5A Record label: tuekhuonghp Windows 12/09/2014. Please, I beg you!

  • How to run the chkdsk utility

    I need to know how to run a chkdsk utility laptop always tells me that I have a corupt file and to run, but I can't understand how do

  • the internet update 8

    I've updated my internet to internet explorer 7 to internet exlporer 8 and every since I did, I can't search my homepage which is yahoo, I can only search of gogle, I uninstalled internet exploer 8 and I still can't get my Yahoo home page.