Configuration of Cisco for Cisco VPN Client ASA 5505

Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

There step by step guides to create the connection profile file to distribute to customers?

Hello

The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

You will need to set the same in the client, so that they can negotiate and connect.

Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

Host will be the external ip address of the ASA.

Group options:

name - same tunnel as defined on the ASA group
Password - pre-shared as on ASA.

Confirm password - same pre-shared key.

Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

Kind regards

Anisha

Tags: Cisco Security

cisco_asa_prob.jpg

Here the IP Configuration and the routing of the Barracuda firewall table:

screen_shot_2014-08 - 12_at_16.01.42.png

I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.

The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.

Here is the config Cisco ASA:

 : Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable

Can someone please help me solve this problem?

When I tried to solve this I didn't choose which interface the Packet Tracer?

The interface inside or DMZ interface? Inside, he says it will not work with the dmz but the error did not help me

Anyone here knows why it does not work?

screen_shot_2014-08 - 12_at_16.34.57.png

screen_shot_2014-08 - 12_at_16.33.06.png

Hello

Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.

entrance to the road that is static to achieve 10.10.10.11 as its display is correct...

Route by tunnel watch also with 255 administrative distance. I've never used that in my scenarios... lets see...

Concerning

Knockaert

Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)

Hello

I say hat the chain and responses I've seen to achieve this goal have been great...

https://supportforums.Cisco.com/discussion/12234631/Cisco-ASA-5505-VPN-p...

and

https://supportforums.Cisco.com/document/12191196/AnyConnect-client-site...

My question is "we will get this configuration by using the graphical user interface for someone who is not notified about the command line?"

Thank you

Of course, all this can be configured via ASDM.

Looking at the second example you posted above, they point you first change:

ACL split of the tunnel for the AnyConnect customer

This Configuration > remote access VPN > network (Client) access > AnyConnect connection profile > (chose the profile and select Edit) > (choose "Manage" next to group policy) > Edit > advanced > Split Tunneling > ensure that the policy does not "Inherit" but rather "Tunnel network list below" > Unselect "Inherit" next to the network list, then 'manage '. Enter your networks you want in the GUI in this dialog box. Click OK all the way back to the main window ASDM and click on apply.

You then change:

Crypto ACL for the tunnel from Site to Site

To do this, go to Configuration > VPN Site-to_site > connection profiles > (choose your profile and select edit) > add the VPN client address pool to the list of local network between protect networks. Yet once, click OK all the way back to the main window ASDM and click on apply.

Then, allow the

ASA to redirect back on the same interface traffic it receives

.. is defined under Configuration > Device Setup > Interfaces. (check the box at the bottom of this screen). Click on apply

Finally, there is the NAT exemption. For which go to Configuration > firewall > rules NAT. Add a NAT device rule before rules network object with Interface Source out, Source address your address pool VPN, the Destination address to include remote subnets and Action is Static Source NAT type source address and destination address remaining as original (i.e. without NAT). Once on OK all the way back to the main window ASDM and click on apply. Save and test.

Good luck. Don't forget to note the brand and posts useful when your question is answered.

Need help with configuration on cisco vpn client settings 1941

Hey all,.

I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

If anyone can help with orders?

I need the installation:

user names, authentication group etc.

Thank you!

Take a peek inside has the below examples of config - everything you need: -.

http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

HTH >

Andrew.

Cisco VPN client + VPN site-to-site

Hi all

I have two ASA5505 with a site to site VPN.

One of the ASA is connected to the internal network 192.168.150.0.

It is connected to 192.168.151.0.

I also configured IPSec Cisco VPN client that is connected to 192.168.150.0.

I would like to know if it is possible for a connected with the Cisco VPN client to access the 192.168.151.0 by the site-to-site VPN network.

Thank you!

Hello

If you mean that the IP addresses of the VPN Pool are something like 192.168.150.x then I suggest to use a totally different network than those used on LANs.

At the software level 9.1 basically causes changes to how are the NAT0 configurations.

MAIN SITE

network of the VPN-POOL object

subnet x.x.x.x y.y.y.y

being REMOTE-LAN network

192.168.151.0 subnet 255.255.255.0

destination of static NAT VPN VPN-POOL POOL (outdoors, outdoor) static REMOTE - LAN LAN

REMOTE SITE

network of the VPN-POOL object

subnet x.x.x.x y.y.y.y

the object of the LAN network

192.168.151.0 subnet 255.255.255.0

NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL

Otherwise, I would imagine that the same kind of configurations above apply. You need the ' same-security-movement ' command to allow the 'outside' to ' outside ' of the movement. You will have to ensure that the ACL from Tunnel Split contains the remote site network. And of course, you should make sure that the ACL crypto sets / include traffic between VPN pool and the network 192.168.151.0/24 on both sides ASAs.

-Jouni

All necessary licenses on ASA 5510 for old Cisco VPN Client

We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with? No matter what special config that needs to be done on the 5510?

Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

Cisco VPN Client and Windows XP VPN Client IPSec to ASA

I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

Config is:

!

interface GigabitEthernet0/2.30

Description remote access

VLAN 30

nameif remote access

security-level 0

IP 85.*. *. 1 255.255.255.0

!

access-list 110 scope ip allow a whole

NAT list extended access permit tcp any host 10.254.17.10 eq ssh

NAT list extended access permit tcp any host 10.254.17.26 eq ssh

access-list extended ip allowed any one sheep

access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

flow-export destination inside-Bct 192.168.1.27 9996

IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

ARP timeout 14400

global (outside-Baku) 1 interface

global (outside-Ganja) interface 2

NAT (inside-Bct) 0 access-list sheep-vpn

NAT (inside-Bct) 1 access list nat

NAT (inside-Bct) 2-nat-ganja access list

Access-group rdp on interface outside-Ganja

!

Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

dynamic-access-policy-registration DfltAccessPolicy

Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

Crypto ipsec transform-set newset aes - esp esp-md5-hmac

Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

Crypto ipsec transform-set vpnclienttrans transport mode

Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

life crypto ipsec security association seconds 214748364

Crypto ipsec kilobytes of life security-association 214748364

raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

card crypto interface for remote access vpnclientmap

crypto isakmp identity address

ISAKMP crypto enable vpntest

ISAKMP crypto enable outside-Baku

ISAKMP crypto enable outside-Ganja

crypto ISAKMP enable remote access

ISAKMP crypto enable Interior-Bct

crypto ISAKMP policy 30

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

No encryption isakmp nat-traversal

No vpn-addr-assign aaa

Telnet timeout 5

SSH 192.168.1.0 255.255.255.192 outside Baku

SSH 10.254.17.26 255.255.255.255 outside Baku

SSH 10.254.17.18 255.255.255.255 outside Baku

SSH 10.254.17.10 255.255.255.255 outside Baku

SSH 10.254.17.26 255.255.255.255 outside-Ganja

SSH 10.254.17.18 255.255.255.255 outside-Ganja

SSH 10.254.17.10 255.255.255.255 outside-Ganja

SSH 192.168.1.0 255.255.255.192 Interior-Bct

internal vpn group policy

attributes of vpn group policy

value of DNS-server 192.168.1.3

Protocol-tunnel-VPN IPSec l2tp ipsec

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split tunnel

BCT.AZ value by default-field

attributes global-tunnel-group DefaultRAGroup

raccess address pool

Group-RADIUS authentication server

Group Policy - by default-vpn

IPSec-attributes tunnel-group DefaultRAGroup

pre-shared-key *.

Hello

For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

Please see configuration below:

http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

or

http://tinyurl.com/5t67hd

Please see the section of tunnel-group config of the SAA.

There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

"crypto isakmp nat-traversal.

Thirdly, change the transformation of the value

raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

Let me know the result.

Thank you

Gilbert

Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

Hello

I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

The router configuration

screen_shot_10-20 - 15_at_09.00_pm.png

IKE policy

screen_shot_10-20 - 15_at_09.00_pm_001.png

screen_shot_10-20 - 15_at_09.01_pm.png

VPN strategy

screen_shot_10-20 - 15_at_09.02_pm.png

screen_shot_10-20 - 15_at_09.02_pm_001.png

Client configuration

Hôte : < router="" ip=""> >

Authentication group name: remote.com

Password authentication of the Group: mysecretpassword

Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

Username: myusername

Password: mypassword

Please contact Cisco.

Correct, the RV180 is not compatible with the Cisco VPN Client. The Iphone uses the Cisco VPN Client.

You can use the PPTP on the RV180 server to connect a PPTP Client.

In addition, it RV180 will allow an IPsec connection to third-party customers 3. Greenbow and Shrew Soft are 2 commonly used clients.

How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

Dear all

How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

Concerning

Hi Imran,

Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

Once you create and save this profile. Your FCP file is stored.

Please assess whether the information provided is useful.

By

Knockaert

connect Cisco VPN client v5 to asa 5505

I have remote vpn configuration issues between ASA5505 and Cisco VPN client v5. Successfully, I can establish a connection between the client Vpn and ASA and receive the IP address of the ASA. Statistical customer VPN windows shows that packets are sent and encrypted but none of the packages is received/decrypted.

Cannot ping asa 5505

Any ideas on what I missed?

Try adding...

ISAKMP nat-traversal crypto

In addition, you cannot ping the inside interface of the ASA vpn without this command...

management-access inside

Please evaluate the useful messages.

Cisco VPN client 3.5.1 and Cisco ASA 5.2 (2)

Hello

I have a strange problem about Cisco VPN client (IPSec) with Cisco ASA. The Cisco ASA runs software version 5.2 (2). The Cisco VPN client version is 3.5.1.

The problem is the customer able Cisco VPN to authenticate successfully with Cisco ASA, but could not PING to any LAN behind the Cisco ASA. In any case, the problem disappeared when we used the Cisco VPN version 4.6 or 4.8 of the customer. All parameters are exactly the same. What has happened? What is the cause of this problem? How can I solve this problem?

Please advice.

Thank you

Nitass

I understand your problem, I never used 3.5.1 so I thought that maybe nat - t is not enabled by default as 4.x.

AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2

Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type

Type of TG_TEST FW1 (config) # tunnel - group?

set up the mode commands/options:
Site IPSec IPSec-l2l group
Remote access using IPSec-IPSec-ra (DEPRECATED) group
remote access remote access (IPSec and WebVPN) group
WebVPN WebVPN Group (DEPRECATED)

FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
FW1(config-tunnel-IPSec) #?

configuration of the tunnel-group commands:
any required authorization request users to allow successfully in order to
Connect (DEPRECATED)
Allow chain issuing of the certificate
output attribute tunnel-group IPSec configuration
mode
help help for group orders of tunnel configuration
IKEv1 configure IKEv1
ISAKMP policy configure ISAKMP
not to remove a pair of attribute value
by the peer-id-validate Validate identity of the peer using the peer
certificate
negotiation to Enable password update in RADIUS RADIUS with expiry
authentication (DEPRECATED)

FW1(config-tunnel-IPSec) # ikev1?

the tunnel-group-ipsec mode commands/options:
pre-shared key associate a key shared in advance with the connection policy

I'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)

Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..

But it would be nice to have a bit more security on VPN other than just the connections of username and password.

If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?

If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?

I really hope that something like this exists still!

THX,

WR

You are welcome

In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.

With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.

Configuration of Cisco for Cisco VPN Client ASA 5505

Similar Questions

cisco_asa_prob.jpg

screen_shot_2014-08 - 12_at_16.01.42.png

screen_shot_2014-08 - 12_at_16.34.57.png

screen_shot_2014-08 - 12_at_16.33.06.png

screen_shot_10-20 - 15_at_09.00_pm.png

screen_shot_10-20 - 15_at_09.00_pm_001.png

screen_shot_10-20 - 15_at_09.01_pm.png

screen_shot_10-20 - 15_at_09.02_pm.png

screen_shot_10-20 - 15_at_09.02_pm_001.png

Maybe you are looking for