Configuration of code purple error

Similar Questions

• Your device is not configured correctly(code 1) error

  Hello

  I have windows XP currently installed on my computer and I also have the new hard drive (seagate 500 gb) installed on my computer.
  I am facing the error with my cell phone (samsung galaxy s duos GT s7562) with my computer and I am unable to make any transfer of media through the PSG.
  Under portable devices > PSG > properties, I get the following message. > "this device is not configured correctly. (Code 1)
  To reinstall the drivers for this device, click on reinstall. When I try update driver it shows "your device is not configured correctly (code 1 error). I tried gel and reinstall driver MTP via "scan for hardware changes", but it does not yet solve my problem.
  How can I get my samsung android smart phone connected to my pc and start sharing media through the PSG. problem certainly lies in the pc.
  Help me out.i am going nuts about that...
  Pankaj.

  Hey,.

  have you found this KB link?

  See "Code 1" from the link

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123/en-us

• How can I fix code purple error on HP?

  I have currently a HP p6277c-b desktop PC running Windows 7 home prmium 64-bit.

  I had a Doctor in my video section of the motherboard, I first checked HP for the motherboard, but they don't sell any more.  I went online and found the same exact motherboard (ipiel-la3-eureka-gl8 p/n 533234-002).

  I installed the motherboard which was perfect, booted up machine and it only would not start before start Ifigured drive somehow got corrupted, so I did a system restore and everything was good, the start screen came punt by that and went to the configuration system, it is when I get an ERROR CODE PURPLE!

  Doing some research on the Internet I found the error Code Purple is a boobie trap that HP creates, there is a tattoo on the motherboard that seeks recovery. Thank you HP.  So I'm stuck since my HP is out of warranty, they won't even far cosider talking to me.

  How can I get the motherboard HP tattoo?

  Sincerely,

  A customer in. ' ed

  John

  The source of the new motherboard has no importance.

  HP said they will help with a "Code Purple". I offer the remedy only if necessary.

• Trouble code purple hp

  Does anyone know how to fix a CODE PURPLE error? My other three Hp / Compaq machines are ALL affected by this disorder. \

  I need HELP, HP told me to run out and BUY retail any OS I want AND my pc are unter warranty hp!

  Since the computer is under warranty, that HP should set. Try to contact them again and talk to someone else.

  You can also check with the HP support forums:
  http://h30434.www3.HP.com/

  HP: The following error message is displayed after that the computer is started after a recovery:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01522228

  Your system has detected a configuration error. Dial your number of Customer Care Center, located in your warranty and license information, for technical support. (Code Purple)

  When this error occur Contact HP .

  To reinstall Windows:

  HP - restore the PC to its state of origin using the F11 key:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01895783#RestoreWithoutWindows

  HP - order of the recovery disc for Windows 7

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

• code purple

  I've restored my pc hp pavilion a6402f factory and received the configuration error "code purple".

  Call 800-HP invent or 1-800-474-6836

• Code Purple on Pavilion a1312n after recovery

  I have a pavilion with 512 GB ram 250 GB hd original a1312n, the USB ports were beaten so I got a replacement with the same model HP motherboard # as the original. I backed up the HD on my Dell & put the HD. I ran the non-destuctive recovery. Once completed he said to reboot. After the reboot, it says I have configuration error Code Purple.

  All support said I need to contact Cust support & pay. Is there anyone on this chat with the knowledge I need to fix without this solution. If we have to pay for support, we will screw up the compuer

  I am well informed of computers to work on them since 1989 and am not scared to do what I need, but I am not educated to shipped.

  Thank you in advance for any help you can offer

  Dwight HoganCamp
  Troy NH

  I'm acatually he has recovered from the HP disk hard disk partitiion. After you delete the audit on the sata drive file, it is recharged with no update problems including MS & HP. The hassle only that I feel with her, it's the audio feature of the motherboard does not work. I went back to the seller and got it.

• Error: unable to contact IP driver, code 2 error unable to connect to the internet.

  Original title: failed to contact the driver of the intellectual property, the error code 2.

  Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

  I did reset winsock.

  IPCONFIG/all reports ~ an internal error: the request is not supported.
  Contact the Services de Support technique Microsoft for assistance.
  Additional information: host name of request impossible.

  Are there instructions to resolve intellectual property issues or should I do a system recovery?

  I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

  Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

  Loss of the internet wireless connection, do not seem to have an ip address now, need help!

  Error code 2 is BACK to talk about 'file not found '.

  If you see this:

  Windows IP configuration

  An internal error has occurred: the request is not supported.
   
  Contact the Services de Support technique Microsoft for assistance.

  Additional information: host name of request impossible.

  Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

  Tcpip.sys

  If the file is missing, you must replace it.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

  If you do not see a copy in the dllcache folder, search for a copy here:

  c:\windows\ServicePackFiles\i386

  If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you

• I can't activate my WIN 8 PRO 64 bit. There is no CODE of ERROR 0x800700b.

  PLEASE HELP ME!

  I have HP ENVY 7222nr dv6 NOTEBOOK PC provided with WIN 8 BASICS 64bits.  I recently replaced it with WIN 8 PROFESSIONAL 64-bit.  But now I'm faced with a threat of losing my WINDOWS.  In the beginning, it was a CODE of ERROR 0x8007267c (and definition: no DNS servers configured for local system.)  Now, this watch is the CODE of ERROR 0x800700B (and description: the filename, directory name or volume label syntax is incorrect.)

  May I please be advised?

  Maybe you also can direct me on how to recover the PRODUCT KEY OF THE FIRST WINDOWS 8 BASES I had to uninstall?

  I thank you wholeheartedly for your kind cooperation.

  Sincerely

  obioraobieze

  EZEIDI ONICHA

  NWA Omar na-echi eze

  artist, creator

  Hello

  Thanks for the reply.

  Glad to know that the information provided was useful. Your efforts too much on this issue is very much appreciated.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• I have tried everything to fix the Code 16 error help!

  I have tried everything to fix the Code 16 error help!

  Hi leolion,

  You may wish to consult the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  Kind regards

  Rave

• Help!  Get pop-ups with CODE of ERROR: sec_error_X1X510_A

  I have an iMAC end of 2012, 3.4 GHz Intel Core i7, 16 GB 1600 MHz DDR3. NVIDIA GeForce GTX 680MX 2048 MB, El Capitan iOS

  When you use Safari, Google home page, I type a domain and it goes to what I believe is a pop-up fake Apple Support with CODE of ERROR: sec_error_X1X510_A.

  Need help solving this. THX

  You have probably installed some adware. Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• What is the Code for error AHT 4HDD/11 / 40000004:SATA (0,0)

  What is the Code for error AHT 4HDD/11 / 40000004:SATA (0,0)

  This means you have a hardware problem related to the hard drive. The disk may be corrupted or fails and must be replaced. Save your file as soon as POSSIBLE. If the player does not have little time for the backup.

• Hidden properties and PropFlag_Hidden gives - failed [Code of error-17500] Popup

  We use a User Interface LV (8.5) TS (4.0), which is a modified version of the Interface of LabVIEW Basic comes with TestStand.  Our user interface is pretty basic; It allows the selection and execution of the sup within these sequences sequences and test sequences.

  Our selection of void sequence control is a Combobox of sequences which is filled automatically by TestStand, for sub sequences when a test sequence is selected by the user.

  Our problem is this: our test sequences have a number of sequences of void, which some we want the user to be able to choose, through our Combobox sequence, and others who must be visible to the user.  We use PropFlags_Hidden flag staggered with the Options of Station-> view hidden properties (disabled) to remove sequences hidden from the Combobox of sequence.  Unfortunately, when the user selects one of the selectable sup sequences, TestStand displays a popup with the text 'Operation impossible [Code of error-17500]'.  If we choose OK on the popup, we can run the sequence of select sub without problem.

  If we set the Options of Station-> display hidden properties selected, all the Sub sequences that are supposed to be hidden appear in our Combobox sequence (as you know) and we get not the popup has failed when you select one of our sub slectable sequences.

  I wonder if anyone has seen this before and can offer advice.

  Thanks for reading

  Steve B

  Hi Sylvie

  Thanks for your reply.  Yes, sorry I have not to explain my problem very well.  Luckily we found the cause and have a solution in place.

  It seems, if you have the file of unique sequence with several sequences it contains (some others not hidden), no hidden sequences must appear above the sequences hidden in the list of sequences.  The reclassification can be done in the editor of sequence or programmatically through the API.

  Thanks again

  Steve

• LabVIEW code 3 error: could not load façade.

  Hello

  I was the second time the "LabVIEW code 3 error: could not load before sign.» When you use the development of LabVIEW 2009 SP1 environment.

  It's really annoying that I waste time as I have to go back to previously saved code.

  Does anyone know where it comes from and how to avoid it?

  Thank you

  Pawel

  Pawel,

  If the façade is damaged, there is little that we can really do about it. So the best thing is to make sure that the front will never get corrupted at all.

  You can write a small VI using VI Server to check the position of the element in your VI. If there is way to positions of reposition before saving the VI.

  Another reason could be much, duplication of controls (including the faulty XControls?)...

  hope this helps,

  Norbert

• The 'cluster of error code.vi error' will be based on the RT 'Dialogue & User Interface' work as expected in a RT application palette?

  The 'cluster of error code.vi error' is available to be included in an application of the RT, but it contains a 'FP. Node Title property"VI and a RT application contains all of the panels before, except when running in debug mode. This vi.lib VI will work properly in an application of the RT running on a cRIO?

  

  The Cluster error error Code VI works fine on the objectives of the RT, but the behavior is slightly different when the appellant VI has a front title which differs by its qualified name.  Note that there is a selection function that checks the mistakes coming out of the public Service. Node title.  If there is no title of façade, then simply will use name of the VI instead, so this VI certainly works on RT.

  Keep in mind that opening a VI reference and a property of reading is relatively a lot of time, so there is a significant performance impact when you call this VI on RT.  This attention to performance has been reported to R & D in 384767 car, but it can usually be avoided by ensuring to call only this VI when there is an error that must be reported to the user.

  Chris M