Configuration of the audio channels in PP 2015.3 v10

Hello

I noticed that the path of the Audio track has changed to the Configuration of the Audio channels in the settings of export of the latest PP. Unfortunately, this affects the way in which players such as QuickTime read the layout of the audio channel.

For example, I went out a DNxHD MOV video with 24 channels for a customer. I attributed to them in my PP of the project and am ready to the output file. The previous version of PP has allowed you to assign titles in the drop-down menu, the Audio track route which, in turn, allowed to see each audio channel / stem in the movie in QuickTime player Properties menu option.

Unfortunately, in the last version of 2015.3, my final file of DNxHD output has all channels play off the one audio track when opens in QuickTime player. However, I don't see all the audio stems when I reimport the DNxHD PP file so I think that this only affects the software outside Adobe.

I wouldn't mind not so much, but the customer would like to see the audio presentation in QuickTime player, so I'm a little confused as to what is wrong here with the last update PP.

Why this changed in the first place? Any help will be very appreciated!

Concerning

Tony

System specifications:

Premiere Pro 2015.3

Windows PC 10, 16 GB of RAM

So, I thought about it fortunately! So you have to choose Audio MONO Channel Configuration settings and then add as many channels as you need (for me it would be 24 mono tracks). As long as you properly assigned audio channels of your sequence, then the output file should be fine.

This seems a strange and unnecessary change for me - I don't know Adobe not have their reasons, but that would have saved me some valuable time if we have correctly explained in the update notes!

Tags: Premiere

Similar Questions

  • I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

    I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

    Hello

    1. what operating system is installed on the computer?

    2. when exactly you receive this pop up?

    3. able to play sounds using Windows Media Player?

    Please provide more information on the issue so that we can better help you.

    In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • Setting the audio channel of blackBerry Smartphones

    After pressing the voice dialing button, I get a message in a message window that reads "unable to allocate the audio channel. Close other applications and try again"and does not activate the voice dialing. Any ideas as to what setting or change that I need to restore voice dialing? This happened all of a sudden and I don't know if I've accidentally changed something or not. Thank you

    You are welcome!

  • Divide the Audio channels?

    Is it possible to split stereo audio (as from iTunes, for example) so that the left output channel passes to the left speaker to the left of a pair of screens Thunderbolt and the output channel right to the right of the screen to the right speaker?  The 'average' channels should be silent:

    SOURCE DISPLAY LEFT         

    L — — — | ------> OUT L

    |     R OUT (entry/no cut)

    |     ——————————————————————

    |     L OUT (entry/no cut)

    R — — — | ------> R OUT

    RIGHT DISPLAY

    I do not know... Try to play around with the Audio configuration utility and MIDI: http://www.macobserver.com/tmo/article/audio-midi-setup-your-macs-secret-sound-m anager

  • Configuration of the individual channels on the PXI-4472 b

    Hi, I use the card PXI-4472 b to acquire data of vibration using sensors with different frequency ranges. The problem I have is that some of the transducers require being fed by the jury (via IEPE) and some don't and I can't find a way to turn the excitement on and off for individual channels, only each other.

    I am using LabVIEW 8.6 and that you have configured all channels using the nodes property to activate the excitement and specify the current, but not all channels require that.

    It says clearly in the data sheet of the map of 4472 channels are individually configurable for the IEPE, can someone please tell me how to proceed?

    Thanks in advance,

    Darren.

    Howdy Darren,

    Please see the following screenshot that illustrates how to set different values for different channels of IEPE all in a single task using DAQmx. The key point here is the property of ActiveChans. Otherwise, as you know, 3GEF55NQ knowledge base: How can I activate IEPE excitement on my DSA in DAQmx device? would do the trick.

    I hope this helps!

  • How can I change the configuration for the output channels analog on a PXI-6704?

    I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

    This piece of test equipment is out of tolerance and must be calibrated.

    I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

    I'm using Labview 7.1

    Thank you

    Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

  • Extract the audio channels to mono files - does not

    When I right click a file .wav stereo in the files Viewer, why are the "extract audio channels to mono files -" option grayed out?

    It worked for me a few weeks before a hearing CC 8.1.0.162 update.  I resorted to using version CS6 where it always works.

    Well, even if I don't use it there, I agree with you - it does not work and is grayed out, and there is no reason that I can see. It still works fine in the Edit menu on the same file, and also you can assign a keyboard shortcut, so you have not really lost all features, even if I would say it was a bug...

    I'll connect it with a reference to this thread.

  • can not duplicate the audio channel

    I shot a video with a video camera Sony borrowed pro. When I transfer a video file in first, it shows an audio left and right channel. My right channel is complete messed up. It comes a with camera input mixing console, set to the wrong setting. So I try to use the left channel only. But, I would like to reproduce and also do it for the right channel. But, when I try to go to the Clip > Modify > Audio > Clip change and try to make the process of change Channel, a large number of settings are grayed out and when I press OK, nothing happens. I'm a total novice at first and look at tutorials throughout the day. The only reason I bought the first was that I had to be able to remove the right side of my audio and duplicate so I can have a mono full its made from the left lane. And I'm totally stuck now.

    Use the audio effect of fill from right to the left.  You can even use it on the entire track in the effects of mixing (Special part).

  • Mixing of the audio channels in CS5

    I have some video clips in which each of the two subjects was separately mic'd the microphones were fed to the camera via a splitter, audio to put a topic on the left channel and the other on the right. both are on the same stereo track.  I want to mix the channels so that each is heard on both channels (it's boring to always hear a topic by a speaker and the other through the other speaker).  Is there a way to do this in Premiere Pro?  I hope I don't need mud autour with separate audio in Soundbooth.  Thank you.

    You duplicate tracks in order to have two same then add filling allow one and right padding to the other. Could you post a screenshot of your cs5 change audio options.

  • Internal Server Oracle 11 g b2b JMS Configuration of the delivery channel

    Hello

    I'm using Oracle 11 g b2b server is configured with the Protocol of Mae. I created an internal delivery of JMS to host business partner channel. Now the message inbound (remote trading partner message) is given to dorsal application via the internal delivery of jms channel. Now, I wanted to send you this message to the domain of the weblogic another server that is hosted on another box. So where can I give the other weblogic domain details such as the message will be delivered from the host commercial b2b serveur_partenaire to the weblogic domain queue remote?

    Kind regards
    Belleau

    Hi Ben,

    As already mentioned by Nitesh, you can create a channel of internal delivery of JMS and even configure in your agreement for routing messages to the remote (domain) weblogic JMS queue.

    Details of port and the ip address of the remote weblogic domain can be configured as part of the JMS internal delivery, 'Provider of Destination' channel, as below,

    for example.
    Java.naming.Provider.URL=T3://:; java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory; java.naming.security.principal =; java.naming.security.credentials =

    In this case, messages delivered directly to remote JMS queue.
    Concerning
    Nebot

  • Audio configuration problem: the previous configuration of the audio device is no longer available

    How can I solve this problem?

    Check the audio preferences.

  • I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

    I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

    When you go to interpret, I chose multichannel, then specified 4 tracks.

  • Keep the audio track provided at 0 reached next clip in first CC 2015

    I move down the level in the mixer to the audio channels, whenever it reaches the clip in the timeline it moves backward to 0

    Also if I cut the track he restores the sound it himself when he reached the next audio clip. He does with his original and also that I swapped now try it for

    Is there a way to stop this?

    OOP no problem, accidentally turned not on ' Source patch for inserts and replace "whatever

  • Multi-cam sequence only ONE AUDIO CHANNEL LEFT, Adobe Premiere Pro CC TIMES.

    Hi all

    I was wondering if someone could help me out here. I have several hours of short clips (1-3 min) of an event of 3 days I am organizing and preparation for editing.  I wasn't on the shooting, but the cameras record the external microphone (main audio) on one channel and the internal microphone (audio reference) on another channel; but it varies on what channel they recored reference main vs.  For the clips where someone talking directly to the camera and I know that I will not need the audio reference, I went and made "audio editing" and mixed the "stereo" until "mono" and then selected the channel with the "audio main' to be source channel.   It works now great when the person talks it comes in evenly on the left and right speakers instead of being unbalanced.

    However, when I then try to take 2 of these clips which were mixed at the bottom of 'mono' and create a new multi-cam sequence, new sequence plays constantly audio only from the left lane.  I tried many configurations where do the multi-cam of sequence (automatic, mono, stereo, Adaptive). Nothing works - he ONLY plays the left side.  I also tried to change the audio channels after I do the new sequence and put "Channel 1" in both channels left and right.  Nothing, he still plays on the left side.

    Any idea on how to get my mono source channel to play regularly in the left and right channels instead of only in the left?  Also, if I try to Pan right in the effects window, it's just quieter, not balanced.

    Thanks for the help!

    Found a solution here multicamera Source Audio sequence of 1 speaker instead of two? HELP Please!

    CTRL + N or command + N for a new sequence, select your preset (in my case DVProHD > 1080i) and make sure the audio channels are all mono. Then copy and paste all your clips into the new empty sequence.

    When I upgraded from Premiere Pro CC 2014 and 2015, all my sequences blocking started playing mono audio through the left speaker only. I'd just create a new multi camera sequence or if I opened one I had created in 2014.

  • Canon xf105 - multi audio channels in CC import mxf files

    Hello

    We have recently upgraded to CC in all of our Department, and I am importing filmed on our Canon XF-105 using the MXF wrapper. 5.5, I could simply drag and drop the project in the timeline panel and have two audio channels recorded it. CC, I see that the audio recorded with channel 1 and my clip in this instance has been connected to channel 2. Is this something that is known? Did I miss something about the configuration of the project?

    Thank you in advance for your help!

    Everything you need to know about the project or files, give me a shout!

    See you soon,.

    Paul

    Many things have changed since 5.5.

    You need configure preferences before importing it.

    Contained stereo to Mono Audio / default of Audio tracks.

    Or change the audio channels of clips in the project window.

Maybe you are looking for