Similar Questions

• Possible to use the main clock FPGA as a basic Source of time for the NI 9234?

  Hello

  I am running a NI 9234, and NI 9222 module on a cRIO-9114 chassis with a real-time 9022 controller, data acquisition on the 8 channels on the full sample rate, using the FPGA.

  My problem is the synchronization of the data, where the NI9234 is usually a late acquisition, compared to the NI9222. I tried manually delay the NI9222 to take the first samples, but so far without success.

  To solve this problem and also to ensure a rate of data more comparable on both cards, I was wondering is it possible to create a Source of time Base master for the NI9234 WITH THE FPGA (opposite to import from another NI9234 or similar module)? The NI9222 I already provide with sampling of the impulses from the FPGA (as expected with this module).

  Another issue would be the characteristics of the exact chronology of the two modules, including in terms of synchronization between the beginning of the acquisition and the first samples of data. I couldn't find any information about it...

  Thank you in advance,

  O Hoppe

  Hello!

  I've never heard of a possibility to use a time base FPGA with a module of Delta-Sigma.

  But I think that the question should be what has not worked to delay the signal and how you did it. Have you read this article?

  How can I compensate for delays of different group with the C Series Modules in LabVIEW FPGA?
  http://digital.NI.com/public.nsf/allkb/74EB238E1BCADD528625735300681A7D

  Can you give a more detailed description of your trial to delay acquisitions? Can you provide a code example?

  Best regards

  Christoph

• Basic question on the configuration of the OVD

  Hi gurus
  I have a basic question about the configuration of the TPM. I have all the "employees" in Active Directory and 'Employees + external users' in OID. The employee user password is maintained in AD, while the same for the external user is maintained in OID.
  
  Query:
  I need to configure authentication for an application for the employees present in the AD and present external users in OID. I have to join the profiles of employees present in AD and OID. Even if the employees are present in the OID, I don't want to configure for authentication of the OAM.
  
  How can I implement this using OAM and OVD.

  I got your condition.

  You said that OID contains external users as well as employees. You manage a container separated for employees in OID. If so, you job would be easy. If there is no container separated for employees on the OID and storing all users (employees and external users) in the same container (default: cn = Users, dc = xxx, dc is com) then you can get the list of AD users only with the following ldapsearch command:

  ldapsearch h Pei d 'cn = sleep '' w sub s b '' 'objectclass = user' SamAccountName

  Create three adapters OVD:

  1 adapter used (this should point to Active Directory)

  2. users adapter (when creating this, you have to exclude users AD, just similar to find the above option).

  3 create the adapter to store as the clubs above two adapters.

  Now, OAM should talk to store adapter.

  I hope this helps.

  Thank you
  GK

  Published by: GK Goalla on October 3, 2012 12:34

• Configuration of the Source of AP?

  Can someone guide me the steps required to configure the AP Source?...

  Hello

  For the Source configuration, use the following navigation:

  Responsibility of AP-> Setup-> research-> Payables. Request for the "SOURCE" type and add it to the line.

  Concerning
  Arun Kumar sahmane
  Apps Associates.
  http://arunrathod.blogspot.com/

  This question has been posted earlier... Please visit the following link...

  Re: AP HAVING/DEBITMEMO CONVERSION of INVOICES

  Published by: Arun Kumar Sahm on August 25, 2008 12:28

• Configuration of the BIOS XW8600 for SSD and HDD

  Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options.  250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.

  I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive.  I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.

  I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it.  This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.

  Can anyone offer any suggestions or comments on how I can improve this situation?

  Thanks for any help, you can suggest.

  What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP?  If I remember well Vista 64 was the latest HP OS with sold.  In this case you won't have to deal with a set of HP restore disks.  I would never do an "upgrade" of a prior installation of OS in W7.  I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD.  I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).

  Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD.  That will take some time.  Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.

  The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.

  Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago.  It is an important.

  Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation.  Change that on "RAID + AHCI.  Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.

  Demarrer start on the DVD, select clean install and things will be fine.  I usually set my boot order to start hard drive/SSD first and second optical drive.  Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.

  It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed.  I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores.  I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.

  After you have things working with the SSD and the DVD player you can add in your other material sequentially.  I would like to make a reboot between each addition, just be very careful.  Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.

  All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.

  Let us know how things are, so that others can enjoy...

• Restore the configuration of the AIP-SSM20?

  Hi there

  I have a small problem here - we are in the phase inupgrading of our Firewall to a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected, it was quite simple just restore the current configuration of the SSM10 on the SSM20'- and weel - looks too so when I copy everything my server configuration ftp in backup-config and then load the backup current config with deletion - but when I look at by the After he was replaced in the configuration of the network?

  I use the version 7.04 (E4) the kernel he...

  The anyoine there have attempted to backup and restore the complete configuration - without problems?

  If I copy the restored configuration back and do a diff on them the difference lies in the service host section:

  2V2

  < !="" current="" configuration="" last="" modified="" wed="" jun="" 22="" 23:42:31="">

  ---

  > ! Current configuration changed the sea Mar 30 15:03:54 2011

  8 C 8

  < !    ="" signature="" update   ="" s573.0  ="">

  ---

  > !     Update of the signature S561.0 2011-04-20

  34 c 34

  < service="">

  ---

  > service host

  36 c 36, 38

  < host-ip="">

  ---

  > host-ip x.x.x.42/24,x.x.x.1

  > host name of fw_pri Internet service provider

  > telnet-option enabled

  a 37, 40, 54

  > dns primary server enabled

  > address 8.8.8.8

  > output

  > dns server secondary disabled

  > dns server service disabled

  > output

  > time-zone settings

  > offset 60

  > standard time - GMT + 01:00 area name

  > output

  > ntp-option enabled-ntp-no authenticated

  > ntp server - 193.162.145.130

  > output

  > automatic update

  > cisco-server disabled

  is this a known issue?

  best regards /ti

  we are in the phase inupgrading our firewalls from a set of 5510 with SSM10 to a set of 5520 with SSM20 - and I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es

  Fix. You should be able to restore a backup of configuration of the sensor of the AIP-SSM-10 on a module of sensor AIP-SSM-20 without much trouble, although hardware-wise that the AIP-SSM-20 are more able/powerful, there is no difference in the interface (or quantity) naming conventions, etc. that was displayed in the configuration.

  I expected it was quite simple just to restore the current config from the SSM10 on the SSM20'es - and weel - it also looks so when I first copy the config from my ftp-server to the backup-config and then load the backup to current config with erase - but when I afterwards look in the network configuration it has been replaced?

  I'm not sure that I followed exactly the procedure that you tried, but you should be able to back up the current configuration of the AIP-SSM-10 sensor module to a remote server, and then copy from the remote server to sensor AIP-SSM-20 module. Example:

  AIP-ssm-10 # copy current config

  AIP-ssm-20 # copy current-config /erase

  NOTE: The parameter/erase applies only to the current config. If specified for the current-configdestination, the configuration of the source is applied to the default configuration of the system. If it is not specified for the current-configdestination, the configuration of the source is merged with the current config. Maybe that is part of the confusion?

• Oracle 11G - configuration of the Service CARS

  Hello
  I read a lot of documentation about oracle services and I have ok understand how they work. However, I have a general question about using Oracle RAC configuration services. For example, if I have a 2 node RAC 11 GR 2 on a Linux Redhat Server oracle. I have an application that connects to a service that I created. I create the following service.
  
  srvctl add service d ORCL_RAC s app_service - ORCL_RAC1, ORCL_RAC2 r
  
  The tnsnames contains:
  
  APP_OLTP =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = TCP)(HOST = server01) (PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = server02) (PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = APP_SERVICE)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 20)
  (TIME = 1)
  )
  )
  )
  
  My questions are the following:
  
  (1) when I do a "srvctl status service d ORCL_RAC", I see the service that is running on both nodes of the RAC? Or he runs only a single node, and then it will switch to the other if necessary?
  (2) if I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 runs only on node1 and RAC_SRV2 is only running on Node2. There are two applications that share the same database, an application uses RAC_SRV1 and the other application is the use of RAC_SRV2. Am I right to think that there is no failover available here? If node1 goes down, the connection to RAC_SRV1 application will be not able to connect to the right of node2?
  (3) in the case of the scenario in question 2 above, it would be better practice to simply create a service and have the two applications connecting to a service? Could configure NEB service to point connections of an application with the Node1 and node2 another application?

  (1) when I do a "srvctl status service d ORCL_RAC", I see the service that is running on both nodes of the RAC? Or he runs only a single node, and then it will switch to the other if necessary?

  You can see how it works on both nodes.
  Use a option in srvctl (a list of available instances to which the service switch when the database's administrator managed).

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/srvctladmin.htm#i1008562

  (2) if I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 runs only on node1 and is RAC_SRV2 > only running on Node2. There are two applications that share the same database, an application uses RAC_SRV1 and the other application is the use of RAC_SRV2. Am > reason to think that there is no failover available here? If node1 goes down, the connection to RAC_SRV1 application won't be able to connect to node2 > right?

  It depends on the configuration of your service. Check it out by srvctl config

  (3) in the case of the scenario in question 2 above, it would be best practices simply create a service and have the two applications connecting to that > service? Could configure NEB service to point connections of an application with the Node1 and node2 another application?

  better create two services, one for each application with specific and other nodes in the available list.

• IOM 11.1.1.5.0 Configuration of the generic UNIX BP02 connector problem

  I have a survey concerning the configuration of the generic UNIX connector on 11.1.1.5 to IOM. Basically, when I try to do the first Recon and Shell Recon group, I get an error saying:
  
  Oracle.iam.connectors.icfcommon.exceptions.IntegrationException: The value of a [Host] key is not defined in the plan provided.
  
  I followed the connector guide UNIX documentation and has also created an attribute in the OIM Design Console called privateKey [LOADFROMFILE] that contains a value of file:\\\home\oracle\Oracle\Middleware\Oracle_OIM1\server\ConnectorDefaultDirectory\SSH\config\oim_rsa.
  
  I also tried to set up a user with UNIX resources but I get an error message saying:
  
  CREATEUSER running
  Target class = oracle.iam.connectors.icfcommon.prov.ICProvisioningManager
  < 2 July 2012 18:20:32 PHT > < error > < ORACLE. IAM. CONNECTORS. ICFCOMMON. Prov. ICPROVISIONINGMANAGER > < BEA-000000 > < oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error while creating user
  oracle.iam.connectors.icfcommon.exceptions.IntegrationException: the value of a [Host] key is not defined in the plan provided.
  at oracle.iam.connectors.icfcommon.util.MapUtil.getRequiredValue(MapUtil.java:94)
  at oracle.iam.connectors.icfcommon.ConnectorFactory.createConnectorFacade(ConnectorFactory.java:122)
  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:133)
  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:141)
  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:253)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpUNIXCREATEUSER.CREATEUSER(adpUNIXCREATEUSER.java:109)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpUNIXCREATEUSER.implementation(adpUNIXCREATEUSER.java:54)
  at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
  at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
  at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2917)
  at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:547)
  at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
  at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(tcProvisioningOperationsBean.java:4042)
  at Thor.API.Operations.tcProvisioningOperationsIntfEJB.retryTasksx (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy329.retryTasksx (Unknown Source)
  at Thor.API.Operations.tcProvisioningOperationsIntfEJB_4xftoh_tcProvisioningOperationsIntfRemoteImpl.__WL_invoke (unknown Source)
  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
  at Thor.API.Operations.tcProvisioningOperationsIntfEJB_4xftoh_tcProvisioningOperationsIntfRemoteImpl.retryTasksx (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
  to $Proxy167.retryTasksx (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
  to $Proxy328.retryTasksx (Unknown Source)
  at Thor.API.Operations.tcProvisioningOperationsIntfDelegate.retryTasks (unknown Source)
  at com.thortech.xl.webclient.actions.ResourceProfileProvisioningTasksAction.retryTasks(ResourceProfileProvisioningTasksAction.java:702)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
  at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
  at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
  at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
  at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
  at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:76)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:121)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  >
  
  
  I would like to ask if there is one configuration step that I missed that causes this error?
  
  Thanks in advance!

  Hello

  Check in the resource COMPUTER provided you a value for the host.

  Concerning
  user12841694

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• change the target name in the Configuration of the analysis

  I need to change the name of the target in "Configuration of the analysis.
  but this isn't one of the options that can be changed...
  
  Basically, the target database name is ORCL.
  but we have several servers that have the same sid (ORCL)...
  
  There are moments when all the shows of the MA is ORCL (for examle the target research and monitoring desktop widget)
  and I can't tell what server he is...

  Hello

  I ran into similar problems. We have two parallel deployments of our databases, where we db1, db2, db3 on site1 and site2. It is a RAC configuration. Here's how I solved it:

  1. move all the databases of the grid, that you may have discovered.
  2. ensure that all hosts have agents and enrolled in the grid.
  3. navigate to targets-->--> addition of database, data bases
  4. Enter the host name of the place where to find the database.
  5. when the agent detects it, at this time, you can name the database you want. I would recommend calling it something like db1_site1.
  6. set your dbsnmp passwords and check the connections are successful.
  7 confirm the addition of these objectives in grid control.
  8. repeat the previous steps for the other sites.

  It worked pretty well for us. Additionally, make sure that your grid control unit can communicate with your databases on port 1521, or the listening port, since it sends commands to the listener of the GC box to validate the actions that you take in the user interface.

• Configuration of the IPC

  Hello
  I have a question related to the Inter Process Communication.
  It is the first time that I try to configure it and probably you can help me.
  I have an environment with WLS with two engines and I want the process to a single engine to create instances in the process of the other engine. I created two projects of small sample to test how it works.
  I started with the simplest scenario. I sent two engines to the WL Admin Server. I have a single body. I sent each project to each engine. And now I have to configure in the external processes in the Task Manager. The first thing to configure is the Organization, I guess that's the organization that appears when you connect to the administrator of the process, in my case, it's oracle is to know how to be configured or must put the name of FDI or the OU that appears at the level of the process?
  After setting up the Organization, I need to set up some properties:
  1 - OU: I have no defined organizational units so that I can leave this field blank or I'll put ' / '.
  2 - process: I put here the process I want to instantiate that belongs to the project deployed in the other engine.
  3 - URL: t3://192.168.1.33:7001 where is my adminserver.
  4. - user: user which I put here?, the admin user?
  When I start the process, I have an exception, sorry it of in Spanish, but basically says that the process I want to instantiate is not found in the oracle of directory service.
  ENGL_01215 Se ha producído una excepcion mientras is ejecutaba una like. Details: The instance ' / Subvencion#Default-1.0/8/0@oracle' of the activity ' / local # default - 1.0 / ProcessCreation [Transact]' no ha could create an instance in the process ' / Tramitar@oracle'. Due to: No. is ha sown el proceso "Transact" in the service of directorios: 'oracle' Detalle:Compruebe that the service of Directory works correctamente el proceso y is ha achieved implant. Tenga in cuenta Los Motors J2EE of Oracle live una referencia para comunicarse config. fuego.papi.exception.CannotCreateInstanceException: the instance ' / Subvencion#Default-1.0/8/0@oracle' of the activity ' / local # default - 1.0 / ProcessCreation [Transact]' no ha could create an instance in the process ' / Tramitar@oracle'
  
  So basically I have something of the above that's not OK, but I did different combinations in this configuration and I still have the same exception.
  Can someone help me?
  Thank you very much
  Kind regards

  Hi Ruben,.
  First of all, you have deployed two processes on the same engine (bpmengine1). I guess you were trying different options.
  Second, I'm afraid to tell you, but there is a bug. The configuration should be the one I told you.
  I didn't test, but I guess you can work around the problem by adding a third reference with the name of the child process, but without its version, pointing to the engine where the deployed assets process run. (do not remove one version, because the engine will need later)

  Don't forget to restart the engine (if you restart WLS still better).

  Hope this helps,
  Ariel

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• How to configure a printer wireless connected to Time Capsule?

  I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

  What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

  I hope someone here could help me, please. Thank you!

  I have an Epson printer, so some of my experiences may or may not apply.

  I also have a time Capsule, and my printer and Time Capsule are far apart.

  My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

  When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

• Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

  Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

  I have the same problem, but the difference is in the opening of the MS WORD hyperlinks to download documents (for example http://ntv.spbstu.ru/2011/hss_2011_3.pdf#page=145 ). This link wants to call MS IE.
  At the same time, all the HTML links are opened in FireFox.

• Is there a better application of configuration of the airport as the Airport utility?

  Utility of the AP does not have options for what he used.  Is there a configuration utility more professional which can be used with the latest AP Extreme, Express and Time Capsule?  For example, the AP utility won't let me configure my extreme from AP to "connect to a network.  The only options are "Create a wireless network", 'Extend a wireless network' and 'Off '.  It WON'T let me set up my Airport Express like that, but I would also do that with my AP extreme, since it is only six feet from the main Internet access (Time Capsule).  I don't really need two transmitters as close to each other and I cannot use Ethernet in this case.

  This is just one example.  If for no other reason, I would like to see what other settings are available with the hardware.  Y at - it a more complete installation utility?

  Y at - it a more complete installation utility?

  Sorry, but no.  More than 3 years ago, Apple has removed 20 + useful features and options of AirPort Utility.

  If you still have an old Mac running Leopard (10.5.x) or Snow Leopard (10.6.x), you might be able to use it to look for options of 'missing '.  A PC with the AirPort 5.6.1 for Windows utility may work as well.