Configuration of the DMZ for MS access

Similar Questions

• Configuration of the DMZ R12

  Hi all
  
  I intend to configure the DMZ in my CA.
  
  Application: node 2
  Database: 11 GR 2 RAC
  OPERATING SYSTEM: AIX 6.1
  Application version: R12.1.3
  Using 1 Cisco hardware load balancer
  
  Query:
  I intend to go for the option "using hardware load balancing with no. external Web tier" I want to put my application server to the outside world.
  I intend to create vritual machine in Apps node 1.
  
  for this I need a separate queries or can I use the same load balancer used for internal application servers?
  All configuration changes what should I suggest you get out of the team for this configuration of the DMZ network?
  
  Please suggest
  
  Thanks in advance

  You can check the Option 2.5: using hardware load balancing with external No. layer Web of MOS note:
  Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1]

  You can also view the part of Cisco for hardware load balancer
  Implementation of load balancing across Oracle eBusiness Suite - Documentation specific Load Balancer Hardware [ID 727171.1]
  Thank you

• What is the right configuration of the port for my Photosmart C6180 using 32-bit Windows 8?

  Hi all

  I have a HP Photosmart C6180. I recently changed to Windows 8 32-bit. I downloaded the HP Windows 8 drivers, but I still have problems with the printer. In Control Panel, the printer status says "error".  I think that it could possibly be a problem with the printer port settings. So, my question is, what is the right configuration of the port for my Photosmart C6180 using 32-bit Windows 8?

  I would greatly appreciate any help you can give me. Thanks, JoeRocket

  Hello JoeRocket,

  Welcome to the HP Forums!

  I understand that your Photosmart C6180 enjoys a status of "error". I will do my best to help you! I would start by following this entire document on "Printer is off-line" Message appears on the computer and the printer does not print.

  This document provides steps to check the printer driver and port of your computer. Please post your results, I'll be looking forward to hear from you.

  Have a good night!

• How to get the configuration of the feature for UIMap value?

  Hi all
  Right now, I do a function that needs to get the value of configuration of the feature for the UIMap, anyone have the solution for this or is it just imppssible?

  You can get the values of business Invoking 'Base' = "C1-GetFeatureConfiguration" and then call the user interface mapping, where the BS is included.

• Configuration of the DMZ at R1213

  Hello

  I put implement R12 Configuration in a DMZ. We already have an existing instance of R12. Following Doc ID 380490.1 to implement the same, have chosen to proceed with option 2.4 that is to say, "with the help of Reverse Proxies only in the DMZ.

  I also talk about Doc ID 726953.1 that is specific to above the application method. Finishing with the configuration.

  My confusion is, how to start?

  Will I first clone web layer first, and then run adclonectx.pl?

  what I need to clone level apps.

  Help, please.

  Hello

  In this scenario, there is no cloning of any level.

  You just create a new directory in the $INST_TOP on the server exist for the web virtually outer layer.

  Kind regards

  Bashar

• CHKDSK error: cannot open the volume for direct access.

  CHKDSK is on the machine does not work it gives me the error:

  
  Cannot open volume for direct access.
  Autochk cannot run because of an error caused by a recently installed software.
  Use the system restore feature in the control panel to restore the system to a point prior to the installation of the new software package.
  An unspecified error has occurred (766f6c756d652e63 3f1)
  
  
  
  When I run it.

  I also tried a boot following the instructions of clean boot in Microsoft (through the http://support.microsoft.com/kb/331796 URL) and then try to run a CHKDSK command-line command (cmd) prompt in an administrator account and it always gives me error 766f6c756d652e63 3f1

  I also have the CD of Windows 7 available and administrator of the computer. I don't know how to get it to make CHKDSK work correctly at startup
  Thank you

  Hello Mitcherator777,

  You can connect to your computer in normal mode or only in safe mode?

  It would be the best way to run the Chkdsk command:

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Let us know the status of your question.

  Thank you

  Marilyn

  Marilyn,

  This problem has been resolved, I contacted Microsoft directly on the phone in the time of September.
  Question has proved to be a dirty disc. as my 1 year limited manufacturer expired warranty, I have since last week bought a new HDD to solve this problem.
  Please examine this issue.
  Thank you.

• customize the icon for quick access in hearing 2014

  Audition 3 I had a quick access icon in the toolbar so I could create a silence anywhere in the track. In hearing cc 2014 I Don t know how to do it and I´d as an icon for quick access to save the changes I do. Is there a video tutorial on these issues?

  Thank you

  I'm afraid that the shortcut toolbar did not in the current version; Audition 3 was the last version to have it, as such.

• Configuration of the laptop for R12 with node 2 11g RAC database

  Hi all
  
  I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.
  
  Configuration:
  

  generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
  8 GB RAM DDR3
  750 GB HARD drive

  this configuration will be sufficient for the highest installation? RAM? Processor?
  
  I've read a few threads over on this forum where people have recommended for installation of single application (11i or R12), this kind of configuration can be enough.
  
  Please answer.
  
  Thanks in advance.
  
  Brij

  I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.

  Configuration:

  generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
  8 GB RAM DDR3
  HARD DRIVE 750 GB

  This configuration will be sufficient for the highest installation? RAM? Processor?

  You need at least 4 GB for installation on a single node R12. So, if you plan to have 3 VMs (1 application node) and 2 RAC nodes or 4 virtual machines (2 application and 2 RAC nodes), then I suggest that you add more memory. However, your RAM should work, but don't expect (if you go with 3 VMs) but do not expect the performance to be perfect.

  Thank you
  Hussein

• Questions about the configuration of the cache for use with partitioned off-lot...

  Once more, I give it a try to see if we can make use of the new partitioned (split) off-heap storage and are having problems with the configuration of the cache (including configuration files).
  
  The problems that I had, it seems that < high > units should be specified for the entire cluster (or perhaps for a node? not sure yet!) while < original-size > & < size > is specified by partition. Is this correct? That's the way it was intended (for me it would have seemed more logical to also specify < high-units > per partition since I guess overflow checking and expulsion is made by partition)? The way I read the documentation, it seems that all three should be per partition if < partitioned > true < / partitioned > is specified.
  If I value < > 1 mb high-units (as i belive I should if it was per partition) I get the impression that I posted in a previous question (a message to info on some missing index data, then the crash of nodes in cluster with some of out of memory error).
  
  / Magnus
  

  <?xml version="1.0"?>
  <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
  
  <cache-config>
      <caching-scheme-mapping>
          <cache-mapping>
              <cache-name>ObjCache</cache-name>
              <scheme-name>off-heap-near</scheme-name>
              <init-params>
                  <init-param>
                      <param-name>front-size</param-name>
                      <param-value>200000</param-value>
                  </init-param>
              </init-params>
          </cache-mapping>
      </caching-scheme-mapping>
  
      <caching-schemes>
          <near-scheme>
              <scheme-name>off-heap-near</scheme-name>
              <front-scheme>
                  <local-scheme>
                      <high-units>{front-size}</high-units>
                  </local-scheme>
              </front-scheme>
              <back-scheme>
                  <distributed-scheme>
                      <service-name>PartitionedOffHeap</service-name>
                      <backup-count>1</backup-count>
                      <thread-count>4</thread-count>
                      <partition-count>127</partition-count>
                      <backing-map-scheme>
                                <partitioned>true</partitioned>
                            <external-scheme>
                                  <nio-memory-manager>
                                     <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                                     <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                                  </nio-memory-manager>
                                  <unit-calculator>BINARY</unit-calculator>
                                  <high-units>127m</high-units> <!-- PER PARTITION/NODE/CLUSTER?????? -->
                           </external-scheme>
                      </backing-map-scheme>
                      <backup-storage>
                      <!-- PARTITIONED BY DEFAULT?! -->
                          <type>off-heap</type>     
                      <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                      <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                      </backup-storage>
                      <autostart>true</autostart>
                  </distributed-scheme>
              </back-scheme>
              <autostart>true</autostart>
          </near-scheme>
      </caching-schemes>
  </cache-config>

  Sorry, my description is very confusing. High units is by cache. What I was trying to say, is that cache mapping can train additional units high to affect the memory required by the node. Since multiple caches can map to the same pattern, especially if you use wildcards in the mapping, you must consider the total number of hidden units of high times. It is true or not caches use different services.

  You are also right about high units, applying to the partitioned support cards. You could have easily expulsion are happening as you describe. We must take another look at the configuration because it is too easy to make a mistake.

  As expected, the allocation of card support splitting is lazy to avoid the problem you described. The worst case situation, I was trying to explain can occur if you have caused all buffers to be allocated based on the data before all other nodes could take some of the partitions.

  Kind regards

  David

• Configuration of the database for the deployment of Hyperion Planning 9.3.1

  Hello
  
  I'm deployment Hyperion Planning 9.3.1. I read in many places that I need to configure a separate database for each component rather than use a single. Nobody knows the ideal of data distribution if I install the following components:
  
  -Hyperion Shared Services
  -Essbase Server
  -Essbase Administration services
  -Essbase service provider
  -Oracle Hyperion Enterprise Performance Management architect
  -Planning
  -Hyperion reports & analysis
  
  Can I configure EPMA and planning on separate databases as well? As for the configuration of data source?
  
  Any help would be appreciated.
  
  Thanks in advance
  
  Shehzad

  Hello

  Best practices during the installation would be to create the DB sql distinct for each of your products as follows (you don't have to follow the naming conventions)

  -SSP Hyperion 9 (hypHSS)
  -Essbase Server (without SQL repository Req'd)
  -Essbase Services Administration (hypEAS)
  -Essbase provider Services (without SQL repository Req'd)
  -Oracle Hyperion Enterprise Performance Management architect (hypEPMA)
  -Planning (hypPlanSys)
  -Hyperion Reporting & analysis (hyper)

  Remember, if you are creating applications to planning you will also need to create a db SQL distinct for the application, as well as planning SQL db.

  DataSource configurations can then raise the relevant DB.

  Hope this helps

  J

• Configuration of the DMZ and USER-BASE10

  Hello

  I've been using System DMZ1 variables... 3 and USER-ADDRS1... 5 to identify the different networks. However, I was wondering, what is the difference between the DMZ and USER-BASE10? It is in the name, or they are used in different ways by some aspects of the software?

  Kind regards

  Matt

  There is no difference. They are purely just names. The sensorApp just treats them as variables that can be used to specify filters.

• configuration of the programming for the cRIO module?

  Is there a way to programmatically access the configuration settings for the modules in use on a cRIO? I seeks to define the type RTD channels on the NI 9216 RTD by screws, not the exporer project module.  In this way, when the system is established and sent to a customer, they would be able to change this without requiring source code.

  Does anyone do this?

  If you use the scan engine to read the entry (not in the FPGA), there is another property to set the RTD type.  In the FPGA, you have just the weight of the LSB and the Offset properties.

  

• How to configure VPN 3000 Concentrator for remote access

  I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling.  Private interface is configured as 192.168.1.240/24.  Public interface is configured as one of my public IP addresses.  I have a public IP pool on the back side of a cable modem Roadrunner.  I created a pool of addresses for clients such as 192.168.1.200 by 192.168.1.205.  I created all group configurations, group and user base.

  In the IP Routing tab, I see a default route pointing to my IP address of public gateway - the IP address of my box of roadrunner cable modem gateway.

  Since my VPN client, I am able to connect to the VPN concentrator.  I get an address from the pool and check the details of the tunnel under the statistics section shows IP address correct pool for the customer and the correct public IP address of my VPN reorga

  Jeff,

  According to statistics, it seems that the client sends traffic to the hub, but his answer not get back.

  We need check the hub settings itself.

  I need check the hub settings and that it is a GUI based device so I can't even ask to see the technology and the only option available is to WebEx.

  You're ok with webex, pls lemme session comfortable time id and e-mail to send the invitation, it takes no more time and we will carry it out

  Thank you

  Ankur

• Configuration of the database for resuability adapter

  Hi all
  
  I have the scenario where I need to insert/update/select the tables in the database over to a BPEL process IE an array are accessed by several BPEL process.
  
  For this
  
  (1) one solution is to create maps in all BPEL processes and use them. But there duplicacy IE same adapter code in several places. And also in case of change in the structure of the table (which is expected), I have to change cards in all BPEL processes.
  
  
  (2) the alternative is to create maps and BSE and deploy them in the service of the BSE, and call them from BPEL, simply giving url wsdl in partner link.
  
  It works fine but the problem is that it doesn't throw fault fail one-way operations (insert, update) database. My BPEL process continues even if the operations fail.
  
  However it get blame when something goes wrong in an operation (Select Select) two-way. For ex. If I specify a column name that does not exist in the database table, he throws the fault and I'm able to catch in Tote in BPEL.
  
  In the case of 1) above where I configured cards wihin process DB, I get the fault in BPEL and if I can catch and treat them accordingly.
  
  I need to receive without cards configured in BSE during the insertion or update fails. Is there a way to do this? Or is there another way I can configure database in one place cards and use in multiple places?
  
  I use Oracle SOA version 10.1.3.4 MLR #6 and jdev 10.1.3.4.
  
  
  -Sam

  Your second option is the best. Have you thought to implement procedures to make the inserts etc. That way if they don't will answer you a fault.

  see you soon
  James

• Satellite X 200-how to find the configuration of the BIOS for Intel Matrix Storage?

  Hello world

  I'm ready to activate the feature Matrix Storage on my Satellite X 200 - 24 X. The problem is that I can't find any relevant option in the BIOS setup...
  Thank you!

  Hello

  Intel Storage Manager is a pilot and not an option in the BIOS. The only option you have in the BIOS is the mode of access to the HARD drive. There you can change between AHCI and Compatible.

  For AHCI mode which is faster, you need Intel Storage Manager driver. For the Compatible mode, you n t need additional drivers.

  Want to know how to install Storage Manager? Just use the forum search, you will find hundreds of results. ;)