Configuration of updates

Similar Questions

• Re: Configure automatic updates

  Hi all

  I run Windows Xp on my A200. How to configure Automatic Updates feature prompts before downloading updates?

  Thank you

  Hello

  * To configure the Automatic Updates feature: *.

  1. right click on my computer and then click Properties.
  2. click on the Automatic Updates tab, and then click Notify me before downloading updates and notify me again before installing them on my computer.

• Configuration of updates - in perpetual loop

  Hi, I am trying to turn on my laptop, but keeps it shut itself down and restart with the message: "Configuration of updates. "3 of 3 0% complete"
  Then it stops again and goes back to this message.

  I'm desperate to get a file on my laptop, but this does not stop the case. How the hell do I? Any help is GREATLY received!

  Thank you very much

  You can start your laptop in safe mode (F8 at startup > safe mode)?

• At the start, my phone freezes on the configuration of updates and restarts

  At startup, my phone freezes on the configuration of updates and restarts. It won't let me even put my password. Automatically, it restarts and continues to do the same thing over and over again... I need help!

  What were the results of the test of the hard drive?

  It seems that things go too far and you need to perform a factory restore and reinstall the files on your system.

  Repeatedly press the F11 key at startup to enter the Recovery Manager, and then follow the instructions.  I hope that the recovery partition is not damaged.

• failure configuring windows update

  configuration windows updated sometimes twice a day, updates download scussful then restart configure up to 15% then failure, to seniors revertingback, then works fine, til reappers message every day.

  "I followed these instructions but they warn me that this updae cannot be installed in Mode without failure.  When I thought how to restart in Normal mode.

  Since then, I have not known the laptop appeared this exact error message, I'm assuming that you thought you could only install this through the normal start screen.

• Failed to configure Windows Update (update for windows 7 kb974431)

  My sytem downloads the update, then gives me "unable to configure Windows Update". Also get detaisl error code: C004f050.

  What is the problem and how to fix this?

  Thank you

  Look at similar thread:http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ff57f326-0f1d-412c-a4d0-14de1eaf0836

  try to order are sfc and reset the system

• Computer stuck with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. »

  Original title: my computer has been slain with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. "for a week.  What can I do to get it to progress?

  My computer has been slain with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. "for a week.  What can I do to get it to progress?

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Incorrect configuration of update KB2559049

  Original title: incorrect Configuration of update

  Update (KB2559049) will not properly configure during the next reboot after installation.

  [1] Q5. All specified updates installed, except for KB2544521

  [2] , I have installed on my system "Trusteer report"

  [3] Q1. Microsoft Security Essential. No third-party firewall.

  Q3. Free trial of McAfee.

  Q4. Firefox, Chrome and Safari.

  A1. If IE9 installed, KB2544521 would not be installed.

  A2. Many other Internet Explorer users have reported that KB2559049 will install after uninstalling Trusteer report & restart the computer. Give it a try.

  CF. http://answers.microsoft.com/thread/fa3bae62-312b-4428-963e-8260b9dde33c

  A3. If still no joy...

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. when (date about) don't you install Microsoft Security Essentials (MSE) and has been the computer fully-patched to Windows Update in time?

  2. What antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?

  3. do you have a uninstall the pre-installed McAfee free version to test AND THEN (b) download/run the McAfee Consumer products removal tool & reboot (c) before installing any other anti-virus applications (especially MSE) as well as updates of Windows (including the Service Packs & IE) upgrades?

• My computer turns off to configure the updates while I was working on a document - is that it lost forever?

  Original title: lost documents

  My computer turns off to configure the updates while I was working on a document.  I didn't save it.  Can I get it back? or it is lost forever?

  If it has not been registered, he went. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Configuration Windows Update failure

  When I bought my PC, it is already pre-installed Windows 7 Pro and I do not have the disc with me. Usually, I keep my automatic update. last 2 days I update my IE 7 to 11. Which was the day I turn on my automatic update. Today, when I turn on my PC, I got the message "failure configuration Windows Update... "I waited for hours and it will not be the end. I try to turn it off, then restart. It came again the same screen. Even in safe mode.

  How can I cancel the update? How can I get my windows to start?

  Help, please!

  Hello

  Thanks for posting in the Microsoft Community.

  We appreciate to try few troubleshooting steps.

  I suggest you to refer to the Microsoft Help article and check if it helps to resolve the issue.

  https://support.Microsoft.com/en-us/KB/949358

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• Failure configuring windows updates current portable window7

  When Windows tries to update my computer I get the message "failure configuration Windows updates revenant changes...» "Sometimes it sucks seed for update and computer works normally, but in 10 minutes. It asks me to update windows again and if not postponed the repetitions of the cycle.  The computer is an HP with Windows 7 Home Preimum and a 64-bit operating system.

  Hello

  Please refer to this link and check if that helps.

  https://support.Microsoft.com/en-us/KB/949358

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Failure of configuration of updates of windows 8

  I downloaded the updates so many times. After restarrting pc it config. less 40% and is said failure configuration of updates... can I update 8 8.1 or install whole new 8.1?

  I downloaded the updates of 100% and installed after restart

  It kept looping on the failure of configuration updates, 4 hours

  and again said download updates after releasing, I want to update to 8.1. need help

  Hello

  Sorry for the delay.

  As you use the 'Volume licensees' version of "Windows 8", I suggest you check out the link below and check if it helps.

  Support for volume Licensing Service Center;

  https://www.Microsoft.com/licensing/ServiceCenter/help/contact.aspx

  Also I suggest you to consult the article below General availability Windows 8.1

  http://blogs.Windows.com/ITPro/2013/10/18/Windows-8-1-General-availability-the-it-Pro-perspective/

  Meet us, then we can help you further.

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.